[root@mgt5 ~]# rpm -qa | grep -i xcat | sort conserver-xcat-8.2.1-1.x86_64 elilo-xcat-3.14-4.noarch grub2-xcat-2.02-0.16.el7.snap201506090204.noarch ipmitool-xcat-1.8.18-0.x86_64 perl-xCAT-2.14.6-snap201903290319.noarch syslinux-xcat-3.86-2.noarch xCAT-2.14.6-snap201903290319.x86_64 xCAT-buildkit-2.14.6-snap201903290319.noarch xCAT-client-2.14.6-snap201903290319.noarch xCAT-genesis-base-ppc64-2.14.5-snap201811160710.noarch xCAT-genesis-base-x86_64-2.14.5-snap201811190037.noarch xCAT-genesis-scripts-ppc64-2.14.6-snap201903290319.noarch xCAT-genesis-scripts-x86_64-2.14.6-snap201903290319.noarch xCAT-openbmc-py-2.14.6-snap201903290319.noarch xCAT-probe-2.14.6-snap201903290319.noarch xCAT-server-2.14.6-snap201903290319.noarch yaboot-xcat-1.3.17-rc1.noarch
I did confirm that openbmc.pm does exist in the place you mentioned. I had managed to confuse the BMC address with the petitboot IP address, that is now sorted out, and I can access "ssh -p 2200 gpu1413-bmc” and the web gui, which I was previously unable to do. Still the rpower command is the same result as before… [root@mgt5 ~]# rpower gpu1413 stat gpu1413: [mgt5]: Error: Unable to identify plugin for this command, check relevant tables: nodehm.power,mgt;nodehm.mgt;pduoutlet.pdu=.* > On Oct 21, 2019, at 10:33 AM, Mark Gurevich <[email protected]> wrote: > > David, > > I would like to understand why you are getting "Unable to identify plugin for > this command" when your BMC is pingable but not accessible. > > You should have gotten something like this on xCAT 2.14.6: > > [root@fs2vm101 ~]# rpower f5u14 stat > f5u14: [fs2vm101]: Error: [500] Login to BMC failed: 500 Can't connect to > 10.5.14.1:443 (Connection refused). > f5u14: [fs2vm101]: Error: BMC did not respond. Validate BMC configuration and > retry the command. > [root@fs2vm101 ~]# > > What version of xCAT are you running ? > > Mark Gurevich > Poughkeepsie Development Lab > HPC Software Development - xCAT > > "If we knew what it was we were doing, it would not be called research, would > it?" > --Albert Einstein > > > > <graycol.gif>David Johnson ---10/18/2019 05:17:35 PM---I think I’m missing > the last step in setting up the BMC: d. To reset your firmware run the > followin > > From: David Johnson <[email protected]> > To: xCAT Users Mailing list <[email protected]> > Date: 10/18/2019 05:17 PM > Subject: [EXTERNAL] Re: [xcat-user] How to manage Power AC922 from Intel > based xcat cluster ? > > > > > I think I’m missing the last step in setting up the BMC: > > d. To reset your firmware run the following command: ipmitool raw 0x06 0x40. > > Will try it and see if that helps. I can ping the BMC address, but as I said > earlier, > I get connection refused on ipmitool as well as ssh. Also when in the Exit to > shell > environment, netstat -an shows nothing listening on any ethernet ports. > > I’ve just written myself a 7.6 rhel-alt USB stick, and trying to figure out > how to > make the two flash drives into a raid1 mirror (maybe I’ll just skip that > part). > > Thanks for the help so far…. > > — ddj > On Oct 18, 2019, at 4:43 PM, Mark Gurevich <[email protected] > <mailto:[email protected]>> wrote: > The definition looks correct. > > Which version of xCAT? "lsxcatd -a" > What is the OS of the xCAT management node ? > Is there a file "/opt/xcat/lib/perl/xCAT_plugin/openbmc.pm" on the xCAT > management node ? > > > Mark Gurevich > Poughkeepsie Development Lab > HPC Software Development - xCAT > > "If we knew what it was we were doing, it would not be called research, would > it?" > --Albert Einstein > > > > <graycol.gif>David Johnson ---10/18/2019 04:09:30 PM---OK, here is the lsdef > gpu1413 after a few fixes I made. Still doesn’t work. Password redacted. A few > > From: David Johnson <[email protected] <mailto:[email protected]>> > To: xCAT Users Mailing list <[email protected] > <mailto:[email protected]>> > Date: 10/18/2019 04:09 PM > Subject: [EXTERNAL] Re: [xcat-user] How to manage Power AC922 from Intel > based xcat cluster ? > > > > > > OK, here is the lsdef gpu1413 after a few fixes I made. Still doesn’t work. > Password redacted. > A few things are inherited from cluster defaults, but I’m not planning to > boot this host diskless. > > [root@mgt5 ~]# lsdef gpu1413 > Object name: gpu1413 > addkcmdline=mce=ignore_ce > bmc=gpu1413-bmc > bmcpassword=#*#*#*#* > bmcusername=root > cons=openbmc > consport=0 > groups=gpu,power-bmc,rackB10,all,rh7,chs > hostnames=ppc001 > installnic=mac > ip=172.20.210.13 > mgt=openbmc > netboot=xnba > nfsserver=172.20.0.6 > postbootscripts=otherpkgs > postscripts=syslog,remoteshell,syncfiles,setupntp,ipoib,hardeths > power=openbmc > primarynic=mac > tftpserver=172.20.0.6 > > On Oct 18, 2019, at 1:13 PM, Mark Gurevich <[email protected] > <mailto:[email protected]>> wrote: > David, > > The xCAT-openbmc.py is part of beta level Python version of xCAT support for > OpenBMC. The standard Perl support for OpenBMC is done by > /opt/xcat/lib/perl/xCAT_plugin/openbmc.pm > If you really want to try using Python, you can follow > https://xcat-docs.readthedocs.io/en/stable/references/coral/cluster_mgmt/scalability/python/index.html > > <https://xcat-docs.readthedocs.io/en/stable/references/coral/cluster_mgmt/scalability/python/index.html> > > You can see if Python or Perl is used by running hardware control commands, > like rpower or rvitals with "-V" flag. > > The error you are seeing "Unable to identify plugin for this command," > usually mean xCAT can not find appropriate module to handle the command. The > "mgt=openbmc" suppose to tell xCAT to use > "/opt/xcat/lib/perl/xCAT_plugin/openbmc.pm" module. > > Can you run "lsdef gpu1413" ? > > Mark Gurevich > Poughkeepsie Development Lab > HPC Software Development - xCAT > > "If we knew what it was we were doing, it would not be called research, would > it?" > --Albert Einstein > > > > <graycol.gif>David Johnson ---10/18/2019 12:40:19 PM---I found openbmctool > already installed on my system, but that indicates connection refused. I’m > wonde > > From: David Johnson <[email protected] <mailto:[email protected]>> > To: xCAT Users Mailing list <[email protected] > <mailto:[email protected]>> > Date: 10/18/2019 12:40 PM > Subject: [EXTERNAL] Re: [xcat-user] How to manage Power AC922 from Intel > based xcat cluster ? > > > > > > > I found openbmctool already installed on my system, but that indicates > connection refused. > I’m wondering if I need to enable remote management within petitboot? > On Oct 18, 2019, at 10:50 AM, [email protected] > <mailto:[email protected]> wrote: > > I did set up nodehm this way, but I get > > [root@mgt5 ~]# rpower gpu1413 stat > gpu1413: [mgt5]: Error: Unable to identify plugin for this command, check > relevant tables: nodehm.power,mgt;nodehm.mgt;pduoutlet.pdu=.* > > tabdump nodelist |grep gpu1413 > "gpu1413","gpu,power-bmc,rackB10,all,rh7,chs",,,,,,,,,,, > " > [root@mgt5 ~]# tabdump nodehm |grep > power#node,power,mgt,cons,termserver,termport,conserver,serialport,serialspeed,serialflow,getmac,cmdmapping,consoleondemand,consoleenabled,comments,disable > "power-bmc","openbmc","openbmc","openbmc",,,,,,,,,,,"IBM > > There is no openbmc executable on the system and xCAT-openbmc.py rpm will not > install due to dependencies. > -- ddj > Dave Johnson > On Oct 18, 2019, at 10:35 AM, Mark Gurevich <[email protected] > <mailto:[email protected]>> wrote: > > > The latest version of xCAT 2.14.6 should support management of AC922 machines. > > The node definition for these nodes should contain "mgt=openbmc" and > "cons=openbmc" > > After that normal xCAT commands like "rpower", "rcons", "rflash", etc should > work. > > > Mark Gurevich > Poughkeepsie Development Lab > HPC Software Development - xCAT > > "If we knew what it was we were doing, it would not be called research, would > it?" > --Albert Einstein > > <graycol.gif> > david_johnson---10/18/2019 10:11:50 AM---I’m having trouble finding out how > to use either ipmitool or openbmc tools to manage power and conso > > From:[email protected] <mailto:[email protected]> > To:[email protected] <mailto:[email protected]> > Date: 10/18/2019 10:11 AM > Subject: [EXTERNAL] [xcat-user] How to manage Power AC922 from Intel based > xcat cluster ? > > > > > > > I’m having trouble finding out how to use either ipmitool or openbmc tools to > manage power and console for a new IBM powerpc GPU node. Existing cluster is > running the latest update of xcat. Can’t find openbmc executable or the > openbmctool package download referred to in the ibm documentation. > We had one of these machines for a POC about a year ago, but I forgot how we > dealt with it. > > -- ddj > Dave Johnson > > _______________________________________________ > xCAT-user mailing list > [email protected] <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/xcat-user > <https://lists.sourceforge.net/lists/listinfo/xcat-user> > > > > > _______________________________________________ > xCAT-user mailing list > [email protected] <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/xcat-user > <https://lists.sourceforge.net/lists/listinfo/xcat-user>_______________________________________________ > xCAT-user mailing list > [email protected] <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/xcat-user > <https://lists.sourceforge.net/lists/listinfo/xcat-user> > > > > _______________________________________________ > xCAT-user mailing list > [email protected] <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/xcat-user > <https://lists.sourceforge.net/lists/listinfo/xcat-user>_______________________________________________ > xCAT-user mailing list > [email protected] <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/xcat-user > <https://lists.sourceforge.net/lists/listinfo/xcat-user> > > > > _______________________________________________ > xCAT-user mailing list > [email protected] <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/xcat-user > <https://lists.sourceforge.net/lists/listinfo/xcat-user>_______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user > <https://lists.sourceforge.net/lists/listinfo/xcat-user> > > > > _______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
