Thank you for your respond. My issue was due to the configuration of my switch. The "spanning Tree" must be disabled to allow the deployment of a SLES image.
Lionel Obry. From: Mark Gurevich [mailto:[email protected]] Sent: jeudi 3 décembre 2020 16:01 To: xCAT Users Mailing list <[email protected]> Subject: Re: [xcat-user] Issue with SLES12SP5 linuxrc You can try: chdef -t site dhcpinterfaces="eth0" Mark Gurevich Poughkeepsie Development Lab HPC Software Development - xCAT "If we knew what it was we were doing, it would not be called research, would it?" --Albert Einstein [Inactive hide details for "Obry, Lionel" ---12/02/2020 11:29:54 AM---Hi all, OS : SLES 12SP5]"Obry, Lionel" ---12/02/2020 11:29:54 AM---Hi all, OS : SLES 12SP5 From: "Obry, Lionel" <[email protected]<mailto:[email protected]>> To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: 12/02/2020 11:29 AM Subject: [EXTERNAL] [xcat-user] Issue with SLES12SP5 linuxrc ________________________________ Hi all, OS : SLES 12SP5 Xcat : 2.16.1 After executing the boot PXE, the linuxrc sends a DHCP request on the eth1 or eth2 interface instead of the eth0 interface. How can I fix the eth0 interface to the linuxrc? Thank you for your help, Lionel Obry. _______________________________________________ xCAT-user mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/xcat-user<https://lists.sourceforge.net/lists/listinfo/xcat-user>
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
