Is the mac correct for the node? On Wed, Sep 1, 2021 at 11:02 AM Imam Toufique <techie...@gmail.com> wrote:
> Hi, > > Need your helpful thoughts here with a problem we have, please. > > We have nodes that were provisioned with xcat, they are running, OS is > working and installed. The boot order is set to PXE first, SSD 2nd. > > Several days ago, when I rebooted one of the nodes, it went straight to > PXE discovery mode - attempting for an install. This is a node that is > built, it should have exited the PXE boot mode and boot off the disk, but > it never did. > > I am not sure what's going on, it looks like xcat has lost the status of > the node, whether it is installed or not ( need provisioning?) > > Here is the 'lsdef' output of the node: > > ``` > [root@mn] lsdef -t node hpc3-14-03 > Object name: hpc3-14-03 > arch=x86_64 > cpucount=40 > cputype=Intel(R) Xeon(R) Gold 6148 CPU @ 2.40GHz > currchain=boot > currstate=boot > disksize=sda:224GB,sdb:224GB > groups=centos78 > ip=10.240.58.16 > mac=08:f1:ea:e4:35:52 > memory=193122MB > mtm=HPE:ProLiant XL170r Gen10 > netboot=xnba > nichostnamesuffixes.ib0=-ib0 > nichostnamesuffixes.ipmi=-ipmi > nicips.ib0=10.240.60.16 > nicips.ipmi=10.240.62.16 > os=centos7.7 > postbootscripts=otherpkgs,hpc3-postscripts/hpc3postbootscript > > postscripts=syslog,remoteshell,syncfiles,setupntp,hpc3-postscripts/hpc3postscript.1,confignetwork > -s > profile=compute > provmethod=centos7.8-x86_64-install-compute > serial=2M294204L9 > status=booted > statustime=06-21-2021 16:41:45 > supportedarchs=x86,x86_64 > > ``` > > ``` > [root@mn]# nodediscoverls |grep 14-03 > 38363730-3535-324D-3239-343230344C39 hpc3-14-03 manual > HPE:ProLiant XL170r Gen10 2M294204L9 > ``` > > ``` > [root@mn]# lsdef -t network compute_net_1 > > Object name: compute_net_1 > > domain=local > > dynamicrange=10.240.58.221-10.240.58.240 > > gateway=10.240.58.1 > > mask=255.255.254.0 > mgtifname=eno1 > mtu=1500 > nameservers=10.240.58.4,8.8.8.8,128.200.192.202 > net=10.240.58.0 > staticrange=10.240.58.4-10.240.59.220 > tftpserver=<xcatmaster> > ``` > > Any idea what might be going on here? Why an already setup/installed node > is going back to discovery ( and wanting to be installed) mode? > > Can someone please shed some light? > > thanks a lot! > > > _______________________________________________ > xCAT-user mailing list > xCAT-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcat-user >
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user