SOPORTE,
Is this problem related to "xCAT 2.16.2 new xNBA issue" thread.
If not, can you start a new thread ?
Try to rerun the xcatprobe with verbose flag:
xcatprobe -V xcatmn -i eno5
Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research,
would it?"
--Albert Einstein
From: "SOPORTE MODEMAT via xCAT-user"
<xcat-user@lists.sourceforge.net>
To: "xCAT Users Mailing list" <xcat-user@lists.sourceforge.net>
Cc: "SOPORTE MODEMAT" <soporte.mode...@epn.edu.ec>
Date: 09/22/2021 07:41 PM
Subject: [EXTERNAL] Re: [xcat-user] xCAT 2.16.2 new xNBA issue
Hello guys.
I would like you to help me debug the error that I get every time when I
run the command that is shown below. The error is related to the dhcp
service:
xcatprobe xcatmn -i eno5
xcatprobe xcatmn -i eno5
[mn]: Checking all xCAT daemons are running...
[ OK ]
[mn]: Checking xcatd can receive command request...
[ OK ]
[mn]: Checking 'site' table is configured...
[ OK ]
[mn]: Checking provision network is configured...
[ OK ]
[mn]: Checking 'passwd' table is configured...
[ OK ]
[mn]: Checking important directories(installdir,tftpdir) are configured...
[ OK ]
[mn]: Checking SELinux is disabled...
[ OK ]
[mn]: Checking HTTP service is configured...
[ OK ]
[mn]: Checking TFTP service is configured...
[ OK ]
[mn]: Checking DNS service is configured...
[ OK ]
[mn]: Checking DHCP service is configured...
[FAIL]
[mn]: DHCP server reply is wrong
[mn]: Run 'makedhcp -n' if it has not been ran before.
[mn]: Checking NTP service is configured...
[ OK ]
[mn]: Checking rsyslog service is configured...
[ OK ]
[mn]: Checking firewall is disabled...
[ OK ]
[mn]: Checking minimum disk space for xCAT ['/install' needs 10GB;'/var'
needs 1GB;'/tmp' needs 1GB]... [ OK ]
[mn]: Checking Linux ulimits configuration...
[ OK ]
[mn]: Checking network kernel parameter configuration...
[ OK ]
[mn]: Checking xCAT daemon attributes configuration...
[ OK ]
[mn]: Checking xCAT log is stored in /var/log/xcat/cluster.log...
[ OK ]
[mn]: Checking xCAT management node IP: <10.50.1.7> is configured to
static... [ OK ]
[mn]: Checking dhcpd.leases file is less than 100M...
[ OK ]
[mn]: Checking DB packages installation...
[ OK ]
=================================== SUMMARY
====================================
[MN]: Checking on MN...
[FAIL]
Checking DHCP service is configured...
[FAIL]
DHCP server reply is wrong
Run 'makedhcp -n' if it has not been ran before.
I have also run the command 'makedhcp -n' but the error still persists.
The dhcp configuration is shown below in the attached file
[attachment "dhcp.conf" deleted by Mark Gurevich/Poughkeepsie/IBM]
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
