Just reading again... I currently have device setup as A:
Bluetooth/CAI-302, and B: Internal GPS. I will disable the internal
GPS and see if that makes a difference.
Dan
On 7/26/2012 12:52 PM, Morgan Hall wrote:
Dan, sounds like you might have the Space Shuttle polar selected.
I haven't experienced any of these issues on 6.3 with a Dell Streak.
If I recall correctly in the Cambridge waypoint format the home
airfield has an H in the column that specifies the waypoint type.
One interesting thing I noticed on a recent flight was that when I
didn't select a waypoint, the default was to return me to "takeoff."
In one case, I launched in Simulator mode and noticed this on tow.
Thankfully, flying a Duo I was able to hand control over to the back
seater and restart in FLY mode. It immediately recorded Takeoff.
Later in the day on final glide I was loosing ground on my arrival
height, but clearly was going to make it and be quite high. As my
arrival went negative I realized that the default behavior was to
"takeoff" which had been 1500agl or so.
I would also recommend adding an info box for GPS height and AGL
Height to some screen and then double check those on your next flight
to make sure they are generally in agreement with your altimeter and
actual AGL height. Just in case you've got bad map data. Seems like
that could exhibit the behavior that you've reported.
On Thu, Jul 26, 2012 at 6:49 AM, Luke Szczepaniak
<[email protected] <mailto:[email protected]>> wrote:
Hi Dan, I've had a few of these myself, for example on one flight
my reach area was stuck 100km behind me, other times my GPS
position would jump many KM away even though I was on the ground.
I was using XCSoar on Android connected to Internal GPS, CAI302
and Powerflarm via IOIO. Once I disabled the internal GPS all
these disappeared.
Luke
On Thu, Jul 26, 2012 at 9:42 AM, Dan Marotta
<[email protected] <mailto:[email protected]>> wrote:
I'm using 6.4_beta but these anomalies have been with me from
the beginning.
I do not see the reach outline until getting above about
13,000 ft MSL
(7,000 ft AGL).
I get the message "Final glide through terrain" periodically,
even when
directly over the airport at 10,000 ft AGL.
How do I select my home field without searching through all
the airports?
Any help would be appreciated.
Dan
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond.
Discussions
will include endpoint security, mobile security and the latest
in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Xcsoar-user mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/xcsoar-user
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond.
Discussions
will include endpoint security, mobile security and the latest in
malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Xcsoar-user mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/xcsoar-user
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Xcsoar-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcsoar-user
