Hallo again,
It is still not clear to me what shall I select in the "Devices" Driver
box....
The list has Borgelet, Cambridge, EW, IMI, ILEC, VW922, Zander etc....but
it does not have LXNAV V7!
On the XCSoar web page it is written that: *"Both
V7<http://www.lxnav.com/products/v7-v7d.html>
and Nano <http://www.lxnav.com/products/nano.html> are both fully
supported by XCSoar, thanks to LXNAV’s hardware donations."*
Since they are fully supported please write me how to update the firmware
for the V7 (I know how to do it with SeeYou...but I could not find how to
do it with XCSoar).
Thanks a lot in advance for your reply! I really need this information!
Bogdan
**
* *
*
*
*Bogdan MANOIU*
Crew Training Postholder
Flight Operations Division
*TAROM - Romanian Air Transport**
*Otopeni, 224 F, Calea Bucurestilor
*Tel: 004 0722 291 839*
*E-mail:* [email protected]
*Website:* www.tarom.ro
*P** Please consider your environmental responsibility before printing this
e-mail.*
On Tue, Jun 25, 2013 at 8:22 PM, David Reitter <[email protected]>wrote:
> On Jun 25, 2013, at 12:30 PM, Bogdan Manoiu <[email protected]> wrote:
>
> > B. Also any idea on what to program the V7? What comm speeds?
>
> For typical, cheap Bluetooth adapters, a typical speed would be 9600 bps,
> constant. Works well for me.
>
> > C. Will this configuration allow me to declare a task from XC soar via
> V7 to the Nano? How is this done in XCSoar?
>
> The V7 has a passthrough mode which should enable such a thing.
> I haven't achieved it due to baud rate differences (I use a Volkslogger),
> but the newer Nano should be able to handle it. See its documentation.
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Xcsoar-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcsoar-user
