Hi from Germany,
I started the last days to change your development-plattform from ESXi
to XCP (we use XenServer Enterprise in your productive Farm).
Installation on PowerEdge 6850 finished fine ... all servers are up and
running and grouped in one ressource-pool.
But how to (direct) connect the EMC AX100 via Emulex LP1150? Under ESXi
everything worked and I didn't change any SAN settings or cables ...
Starting xsconsole -> Disks and Storage Repositories -> Create New
Storage Repository the new drive is found ... but then the creation of
the partion failed ...
fdisk /dev/sdb fails, too ...
looking at /var/log/messages I get
[root@xen11 tmp]# grep "sdb" /var/log/messages |more
Dec 30 12:46:48 xen11 kernel: [ 29.380175] sd 1:0:0:0: [sdb] Very big
device. Trying to use READ CAPACITY(16).
Dec 30 12:46:48 xen11 kernel: [ 29.380281] sd 1:0:0:0: [sdb]
4558707200 512-byte logical blocks: (2.33 TB/2.12 TiB)
Dec 30 12:46:48 xen11 kernel: [ 29.380542] sd 1:0:0:0: [sdb] Test WP
failed, assume Write Enabled
Dec 30 12:46:48 xen11 kernel: [ 29.380632] sd 1:0:0:0: [sdb] Asking
for cache data failed
Dec 30 12:46:48 xen11 kernel: [ 29.380636] sd 1:0:0:0: [sdb] Assuming
drive cache: write through
Dec 30 12:46:48 xen11 kernel: [ 29.381541] sd 1:0:0:0: [sdb] Very big
device. Trying to use READ CAPACITY(16).
Dec 30 12:46:48 xen11 kernel: [ 29.381910] sd 1:0:0:0: [sdb] Test WP
failed, assume Write Enabled
Dec 30 12:46:48 xen11 kernel: [ 29.382121] sd 1:0:0:0: [sdb] Asking
for cache data failed
Dec 30 12:46:48 xen11 kernel: [ 29.382126] sd 1:0:0:0: [sdb] Assuming
drive cache: write through
Dec 30 12:46:48 xen11 kernel: [ 29.382131] sdb: detected capacity
change from 0 to 2334058086400
Dec 30 12:46:48 xen11 kernel: [ 29.382137] sdb:
Dec 30 12:46:48 xen11 kernel: [ 29.391261] sd 1:0:0:0: [sdb] Device
not ready
Dec 30 12:46:48 xen11 kernel: [ 29.391267] sd 1:0:0:0: [sdb] Result:
hostbyte=DID_OK driverbyte=DRIVER_SENSE
Dec 30 12:46:48 xen11 kernel: [ 29.391273] sd 1:0:0:0: [sdb] Sense Key
: Not Ready [current]
Dec 30 12:46:48 xen11 kernel: [ 29.391281] sd 1:0:0:0: [sdb] Add.
Sense: Logical unit not ready, manual intervention required
Dec 30 12:46:48 xen11 kernel: [ 29.391289] sd 1:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
Dec 30 12:46:48 xen11 kernel: [ 29.391304] end_request: I/O error, dev
sdb, sector 0
Dec 30 12:46:48 xen11 kernel: [ 29.391310] Buffer I/O error on device
sdb, logical block 0
Dec 30 12:46:48 xen11 kernel: [ 29.401214] sd 1:0:0:0: [sdb] Device
not ready
Dec 30 12:46:48 xen11 kernel: [ 29.401219] sd 1:0:0:0: [sdb] Result:
hostbyte=DID_OK driverbyte=DRIVER_SENSE
Dec 30 12:46:48 xen11 kernel: [ 29.401224] sd 1:0:0:0: [sdb] Sense Key
: Not Ready [current]
Dec 30 12:46:48 xen11 kernel: [ 29.401230] sd 1:0:0:0: [sdb] Add.
Sense: Logical unit not ready, manual intervention required
Dec 30 12:46:48 xen11 kernel: [ 29.401237] sd 1:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
Have you got any hints to solve this issue??
Thank you very much.
Philipp
_______________________________________________
Xen-api mailing list
[email protected]
http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api
