Tuesday, February 10, 2015, 2:26:43 PM, you wrote:
>>>> On 10.02.15 at 14:07, <li...@eikelenboom.it> wrote:
>> Tuesday, February 10, 2015, 10:35:36 AM, you wrote:
>>>>>> On 10.02.15 at 10:19, <li...@eikelenboom.it> wrote:
>>>>> I would have thought that xen-pciback would install an interrupt
>>>>> handler here too when a device using IRQ 18 gets handed to a
>>>>> guest. May there be something broken in xen_pcibk_control_isr()?
>>>>
>>>> It seems to only do that for PV guests, not for HVM.
>>
>>> Interesting; no idea why that would be.
>>
>> Coming back to this part .. with some additional debugging on HVM guest
>> start i
>> get:
>> [ 84.362097] pciback 0000:02:00.0: resetting (FLR, D3, bus) the device
>> [ 84.422884] pciback 0000:02:00.0: xen_pcibk_reset_device: me here
>> [ 84.452639] pciback 0000:02:00.0: xen_pcibk_control_isr: return !enable
>> &&
>> !dev_data->isr_on enable:0 dev_data->isr_on:0
>> [ 85.636725] pciback 0000:00:19.0: resetting (FLR, D3, ) the device
>> [ 85.774845] pciback 0000:00:19.0: xen_pcibk_reset_device: me here
>> [ 85.810857] pciback 0000:00:19.0: xen_pcibk_control_isr: return !enable
>> &&
>> !dev_data->isr_on enable:0 dev_data->isr_on:0
>> [ 85.865075] xen_pciback: vpci: 0000:02:00.0: assign to virtual slot 0
>> [ 85.886926] pciback 0000:02:00.0: registering for 1
>> [ 85.907936] xen_pciback: vpci: 0000:00:19.0: assign to virtual slot 1
>> [ 85.929490] pciback 0000:00:19.0: registering for 1
>>
>> So it bails out on:
>> /* Asked to disable, but ISR isn't runnig */
>> if (!enable && !dev_data->isr_on){
>> dev_warn(&dev->dev, "%s: return !enable && !dev_data->isr_on
>> enable:%d dev_data->isr_on:%d\n", __func__, enable, dev_data->isr_on ? 1 :
>> 0);
>> return;
>> }
> I don't really know how this code is supposed to work (we don't use
> it in our kernels), but it seems the more interesting question is what
> happens when xen_pcibk_do_op() calls this function. I also note there
> is a sysfs interface to control some aspects of this, but I can't see how
> that would work when it only sets ->isr_on but doesn't install the IRQ
> handler if it isn't already installed.
> Jan
Suse is still forward porting and not considering upstream/pvops ?
Hmmm it seems xen_pcibk_do_op() is never called ..
Turned up the pciback debug, and annotated xen_pcibk_do_op() it self with
more warnings, it should print something when invoked.
complete dmesg attached.
Here the debug output from pciback:
seizing:
[ 9.113134] xen_pciback: wants to seize 0000:02:00.0
[ 9.113137] xen_pciback: wants to seize 0000:00:19.0
[ 9.113146] pciback 0000:00:00.0: probing...
[ 9.113154] pciback 0000:00:02.0: probing...
[ 9.113160] pciback 0000:00:14.0: probing...
[ 9.113165] pciback 0000:00:16.0: probing...
[ 9.113171] pciback 0000:00:16.3: probing...
[ 9.113176] pciback 0000:00:19.0: probing...
[ 9.113178] pciback 0000:00:19.0: seizing device
[ 9.113182] pciback 0000:00:19.0: pcistub_device_alloc
[ 9.113184] pciback 0000:00:19.0: deferring initialization
[ 9.113189] pciback 0000:00:1a.0: probing...
[ 9.113194] pciback 0000:00:1b.0: probing...
[ 9.113200] pciback 0000:00:1c.0: probing...
[ 9.113205] pciback 0000:00:1c.2: probing...
[ 9.113210] pciback 0000:00:1d.0: probing...
[ 9.113216] pciback 0000:00:1f.0: probing...
[ 9.113221] pciback 0000:00:1f.2: probing...
[ 9.113226] pciback 0000:00:1f.3: probing...
[ 9.113232] pciback 0000:02:00.0: probing...
[ 9.113234] pciback 0000:02:00.0: seizing device
[ 9.113237] pciback 0000:02:00.0: pcistub_device_alloc
[ 9.113239] pciback 0000:02:00.0: deferring initialization
initialization while dom0 is still booting:
[ 14.371824] pciback 0000:02:00.0: initializing...
[ 14.371829] pciback 0000:02:00.0: initializing config
[ 14.371879] pciback 0000:02:00.0: enabling device
[ 14.371944] xen: registering gsi 18 triggering 0 polarity 1
[ 14.371949] Already setup the GSI :18
[ 14.372457] pciback 0000:02:00.0: save state of device
[ 14.372582] pciback 0000:02:00.0: resetting (FLR, D3, etc) the device
[ 14.403788] pciback 0000:02:00.0: reset device
[ 14.403794] pciback 0000:02:00.0: xen_pcibk_reset_device: me heres
[ 14.404638] pciback 0000:02:00.0: xen_pcibk_control_isr: return !enable &&
!dev_data->isr_on enable:0 dev_data->isr_on:0
[ 14.406186] pciback 0000:00:19.0: initializing...
[ 14.406189] pciback 0000:00:19.0: initializing config
[ 14.406225] pciback 0000:00:19.0: enabling device
[ 14.406320] xen: registering gsi 20 triggering 0 polarity 1
[ 14.406340] xen: --> pirq=20 -> irq=20 (gsi=20)
[ 14.406372] pciback 0000:00:19.0: save state of device
[ 14.406435] pciback 0000:00:19.0: resetting (FLR, D3, etc) the device
[ 14.507741] pciback 0000:00:19.0: reset device
[ 14.507747] pciback 0000:00:19.0: xen_pcibk_reset_device: me heres
[ 14.538842] pciback 0000:00:19.0: xen_pcibk_control_isr: return !enable &&
!dev_data->isr_on enable:0 dev_data->isr_on:0
[ 14.571345] xen_pciback: backend is vpci
guest start:
[ 117.061148] pciback 0000:02:00.0: resetting (FLR, D3, bus) the device
[ 117.092324] pciback 0000:02:00.0: OK
[ 117.123935] pciback 0000:02:00.0: xen_pcibk_reset_device: me heres
[ 117.153042] pciback 0000:02:00.0: xen_pcibk_control_isr: return !enable &&
!dev_data->isr_on enable:0 dev_data->isr_on:0
[ 118.336807] pciback 0000:00:19.0: resetting (FLR, D3, ) the device
[ 118.371580] pci 0000:00:00.0: not owned by us!
[ 118.475884] pciback 0000:00:19.0: xen_pcibk_reset_device: me heres
[ 118.497516] pciback 0000:00:19.0: xen_pcibk_control_isr: return !enable &&
!dev_data->isr_on enable:0 dev_data->isr_on:0
[ 118.581239] xen-pciback pci-1-0: allocated pdev @ 0xffff88000007e9c0
[ 118.582466] xen-pciback pci-1-0: getting be setup
[ 118.582683] xen-pciback pci-1-0: exporting dom 0 bus 2 slot 0 func 0
[ 118.582688] xen_pciback: vpci: 0000:02:00.0: assign to virtual slot 0
[ 118.613355] pciback 0000:02:00.0: registering for 1
[ 118.635176] xen-pciback pci-1-0: exporting dom 0 bus 0 slot 19 func 0
[ 118.635180] xen_pciback: vpci: 0000:00:19.0: assign to virtual slot 1
[ 118.657663] pciback 0000:00:19.0: registering for 1
[ 118.682808] xen-pciback pci-1-0: Publishing pci roots
[ 118.682907] xen-pciback pci-1-0: writing root 0 at 0000:00
[ 118.686896] xen-pciback pci-1-0: fe state changed 1
So this one is up to Konrad i guess ...
I haven't checked the call chain of xen_pcibk_do_op .. but that could be a
side effect of libxl not imitating pci-front good enough (since HVM guests
don't use the pci-front driver, but instead rely on libxl and Qemu to play
those parts.
One of the issues i already mentioned that devices never get to the state
connected, for HVM guests. The backend state stays 3 (XenbusStateInitialised)
and the frontend state stays 1 (XenbusStateInitialising).
Until now i thought is was benign and only causing issues on shutdown:
- not cleaning up of the device in the guest itself. which causes invoking
the fallbacks of which a few were fixed just before the 4.5.0 release.
- issues when only removing one assigned device of multiple assigned to a
guest.
since the passed through devices in principle are working OK.
--
Sander [ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-creanuc-20150209-doflr-spurious-pcidb6+
(root@creanuc) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Feb 10 15:52:48
CET 2015
[ 0.000000] Command line: root=/dev/mapper/creanuc-creanuc_dom0 ro mem=1536M
video=HDMI-A-1:1024x768D nomodeset xen-pciback.hide=(02:00.0)(00:19.0)
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] Xen: [mem 0x000000000009d800-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] Xen: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] Xen: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] Xen: [mem 0x0000000040005000-0x0000000060263fff] usable
[ 0.000000] Xen: [mem 0x0000000060264000-0x00000000db861fff] unusable
[ 0.000000] Xen: [mem 0x00000000db862000-0x00000000dbce0fff] reserved
[ 0.000000] Xen: [mem 0x00000000dbce1000-0x00000000dbcf0fff] ACPI data
[ 0.000000] Xen: [mem 0x00000000dbcf1000-0x00000000dbe0efff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000dbe0f000-0x00000000dc207fff] reserved
[ 0.000000] Xen: [mem 0x00000000dc208000-0x00000000dc208fff] unusable
[ 0.000000] Xen: [mem 0x00000000dc209000-0x00000000dc24bfff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000dc24c000-0x00000000dcffffff] unusable
[ 0.000000] Xen: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
[ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000021e5fffff] unusable
[ 0.000000] e820: remove [mem 0x60000000-0xfffffffffffffffe] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: user-defined physical RAM map:
[ 0.000000] user: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] user: [mem 0x000000000009d800-0x00000000000fffff] reserved
[ 0.000000] user: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] user: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] user: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] user: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] user: [mem 0x0000000040005000-0x000000005fffffff] usable
[ 0.000000] user: [mem 0x0000000060264000-0x00000000db861fff] unusable
[ 0.000000] user: [mem 0x00000000db862000-0x00000000dbce0fff] reserved
[ 0.000000] user: [mem 0x00000000dbce1000-0x00000000dbcf0fff] ACPI data
[ 0.000000] user: [mem 0x00000000dbcf1000-0x00000000dbe0efff] ACPI NVS
[ 0.000000] user: [mem 0x00000000dbe0f000-0x00000000dc207fff] reserved
[ 0.000000] user: [mem 0x00000000dc208000-0x00000000dc208fff] unusable
[ 0.000000] user: [mem 0x00000000dc209000-0x00000000dc24bfff] ACPI NVS
[ 0.000000] user: [mem 0x00000000dc24c000-0x00000000dcffffff] unusable
[ 0.000000] user: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
[ 0.000000] user: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] user: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] user: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] user: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] user: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] user: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] user: [mem 0x0000000100000000-0x000000021e5fffff] unusable
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: /D53427RKE, BIOS
RKPPT10H.86A.0038.2014.1223.1928 12/23/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x60000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x5fe00000-0x5fffffff]
[ 0.000000] [mem 0x5fe00000-0x5fffffff] page 4k
[ 0.000000] BRK [0x02092000, 0x02092fff] PGTABLE
[ 0.000000] BRK [0x02093000, 0x02093fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40000000-0x40003fff]
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x02094000, 0x02094fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0x5fdfffff]
[ 0.000000] [mem 0x40005000-0x5fdfffff] page 4k
[ 0.000000] BRK [0x02095000, 0x02095fff] PGTABLE
[ 0.000000] BRK [0x02096000, 0x02096fff] PGTABLE
[ 0.000000] BRK [0x02097000, 0x02097fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x1fffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x04000000-0x04fc5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 Intel )
[ 0.000000] ACPI: XSDT 0x00000000DBCE5080 000084 (v01 Intel D53427RK
00000026 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DBCEEDC0 00010C (v05 Intel D53427RK
00000026 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DBCE5198 009C22 (v02 Intel D53427RK
00000026 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DBE0EF80 000040
[ 0.000000] ACPI: APIC 0x00000000DBCEEED0 000072 (v03 Intel D53427RK
00000026 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DBCEEF48 000044 (v01 Intel D53427RK
00000026 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000DBCEEF90 00009C (v01 Intel D53427RK
00000026 AMI 00010013)
[ 0.000000] ACPI: TCPA 0x00000000DBCEF030 000032 (v02 APTIO4 NAPAASF
00000026 MSFT 01000013)
[ 0.000000] ACPI: MCFG 0x00000000DBCEF068 00003C (v01 Intel D53427RK
00000026 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DBCEF0A8 000038 (v01 Intel D53427RK
00000026 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DBCEF0E0 000315 (v01 SataRe SataTabl
00000026 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DBCEF3F8 0009AA (v01 PmRef Cpu0Ist
00000026 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DBCEFDA8 000B22 (v01 PmRef CpuPm
00000026 INTL 20051117)
[ 0.000000] ACPI: XMAR 0x00000000DBCF08D0 0000B8 (v01 INTEL SNB
00000026 INTL 00000001)
[ 0.000000] ACPI: ASF! 0x00000000DBCF0988 0000A5 (v32 INTEL HCG
00000026 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0x5fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0x5fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x5fffffff]
[ 0.000000] On node 0 totalpages: 392603
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6080 pages used for memmap
[ 0.000000] DMA32 zone: 388607 pages, LIFO batch:31
[ 0.000000] p2m virtual area at ffffc90000000000, size is 400000
[ 0.000000] Remapped 612 page(s)
[ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.6.0-unstable (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88005f600000 s79232 r8192
d31360 u524288
[ 0.000000] pcpu-alloc: s79232 r8192 d31360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 386438
[ 0.000000] Kernel command line: root=/dev/mapper/creanuc-creanuc_dom0 ro
mem=1536M video=HDMI-A-1:1024x768D nomodeset xen-pciback.hide=(02:00.0)(00:19.0)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard
form
[ 0.000000] software IO TLB [mem 0x59a00000-0x5da00000] (64MB) mapped at
[ffff880059a00000-ffff88005d9fffff]
[ 0.000000] Memory: 1436748K/1570412K available (8827K kernel code, 917K
rwdata, 3156K rodata, 1016K init, 640K bss, 133664K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:456 16
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 2294.832 MHz processor
[ 8.758869] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4589.66 BogoMIPS (lpj=9179328)
[ 8.758876] pid_max: default: 32768 minimum: 301
[ 8.758887] ACPI: Core revision 20141107
[ 8.791772] ACPI: All ACPI Tables successfully acquired
[ 8.792445] Security Framework initialized
[ 8.792468] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 8.792473] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 8.792796] Initializing cgroup subsys devices
[ 8.792802] Initializing cgroup subsys freezer
[ 8.792807] Initializing cgroup subsys net_cls
[ 8.792813] Initializing cgroup subsys blkio
[ 8.792817] Initializing cgroup subsys perf_event
[ 8.792904] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 8.792904] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 8.792913] CPU: Physical Processor ID: 0
[ 8.792915] CPU: Processor Core ID: 0
[ 8.793441] mce: CPU supports 2 MCE banks
[ 8.793464] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 8.793464] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 8.793673] Freeing SMP alternatives memory: 48K (ffffffff81fe5000 -
ffffffff81ff1000)
[ 8.795890] cpu 0 spinlock event irq 25
[ 8.795938] Performance Events: unsupported p6 CPU model 58 no PMU driver,
software events only.
[ 8.796189] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 8.796269] installing Xen timer for CPU 1
[ 8.796281] cpu 1 spinlock event irq 32
[ 8.797257] installing Xen timer for CPU 2
[ 8.797269] cpu 2 spinlock event irq 39
[ 8.798163] installing Xen timer for CPU 3
[ 8.798173] cpu 3 spinlock event irq 46
[ 8.798988] x86: Booted up 1 node, 4 CPUs
[ 8.799294] devtmpfs: initialized
[ 8.800177] xor: automatically using best checksumming function:
[ 8.838982] avx : 12103.000 MB/sec
[ 8.839183] NET: Registered protocol family 16
[ 8.839200] xen:grant_table: Grant tables using version 1 layout
[ 8.839214] Grant table initialized
[ 8.839870] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 8.839876] ACPI: bus type PCI registered
[ 8.839880] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 8.840006] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 8.840013] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 8.850950] PCI: Using configuration type 1 for base access
[ 8.931211] raid6: sse2x1 4577 MB/s
[ 8.999337] raid6: sse2x2 5715 MB/s
[ 9.067424] raid6: sse2x4 6496 MB/s
[ 9.067428] raid6: using algorithm sse2x4 (6496 MB/s)
[ 9.067431] raid6: using ssse3x2 recovery algorithm
[ 9.067491] ACPI: Added _OSI(Module Device)
[ 9.067496] ACPI: Added _OSI(Processor Device)
[ 9.067505] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 9.067508] ACPI: Added _OSI(Processor Aggregator Device)
[ 9.069465] xen: registering gsi 9 triggering 0 polarity 0
[ 9.071581] ACPI: Executed 1 blocks of module-level executable AML code
[ 9.076303] ACPI: Dynamic OEM Table Load:
[ 9.076315] ACPI: SSDT 0xFFFF8800596F0000 00083B (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 9.077198] ACPI: Dynamic OEM Table Load:
[ 9.077206] ACPI: SSDT 0xFFFF8800596ECC00 000303 (v01 PmRef ApIst
00003000 INTL 20051117)
[ 9.077888] ACPI: Dynamic OEM Table Load:
[ 9.077896] ACPI: SSDT 0xFFFF8800596A5800 000119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 9.079167] ACPI: Interpreter enabled
[ 9.079177] ACPI: (supports S0 S5)
[ 9.079181] ACPI: Using IOAPIC for interrupt routing
[ 9.079222] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 9.087310] ACPI: Power Resource [FN00] (off)
[ 9.087419] ACPI: Power Resource [FN01] (off)
[ 9.087539] ACPI: Power Resource [FN02] (off)
[ 9.087641] ACPI: Power Resource [FN03] (off)
[ 9.087742] ACPI: Power Resource [FN04] (off)
[ 9.088669] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 9.088680] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 9.089083] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug
PME]
[ 9.089337] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 9.090410] PCI host bridge to bus 0000:00
[ 9.090416] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 9.090420] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 9.090425] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 9.090429] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 9.090433] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 9.090438] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 9.090442] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 9.090446] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 9.090450] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 9.090454] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 9.090459] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 9.090482] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 9.090724] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 9.090770] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 9.090795] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit
pref]
[ 9.090811] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 9.091088] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 9.091142] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[ 9.091324] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 9.091390] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 9.091492] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 9.091548] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3c000-0xf7d3c00f 64bit]
[ 9.091735] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 9.091881] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[ 9.091933] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
[ 9.091955] pci 0000:00:16.3: reg 0x14: [mem 0xf7d3a000-0xf7d3afff]
[ 9.092288] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 9.092335] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[ 9.092355] pci 0000:00:19.0: reg 0x14: [mem 0xf7d39000-0xf7d39fff]
[ 9.092375] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 9.092547] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 9.092617] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 9.092705] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 9.092754] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d38000-0xf7d383ff]
[ 9.092977] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 9.093072] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 9.093164] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 9.093205] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
[ 9.093398] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 9.093471] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 9.093550] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 9.093757] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 9.093816] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 9.093823] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 9.093871] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 9.093955] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 9.094162] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 9.094215] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 9.094222] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 9.094270] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 9.094371] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 9.094420] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d37000-0xf7d373ff]
[ 9.094643] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 9.094735] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 9.094818] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[ 9.095185] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 9.095235] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 9.095255] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 9.095275] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 9.095295] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 9.095315] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 9.095335] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d36000-0xf7d367ff]
[ 9.095466] pci 0000:00:1f.2: PME# supported from D3hot
[ 9.095617] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 9.095656] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d35000-0xf7d350ff 64bit]
[ 9.095711] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 9.096007] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 9.096200] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 9.096255] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 9.096542] pci 0000:02:00.0: supports D1
[ 9.096545] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 9.096606] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 9.103584] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 9.103604] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 9.103656] pci_bus 0000:00: on NUMA node 0
[ 9.103659] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is
unsupported)
[ 9.104048] xen: registering gsi 13 triggering 1 polarity 0
[ 9.104273] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 9.104360] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15)
*0, disabled.
[ 9.104444] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 9.104526] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 9.104607] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 9.104688] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15)
*0, disabled.
[ 9.104775] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 9.104858] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 9.105184] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 9.105245] xen:balloon: Initialising balloon driver
[ 9.105481] xen_balloon: Initialising balloon driver
[ 9.105677] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 9.105685] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 9.105691] vgaarb: loaded
[ 9.105694] vgaarb: bridge control possible 0000:00:02.0
[ 9.105795] SCSI subsystem initialized
[ 9.105812] libata version 3.00 loaded.
[ 9.105847] ACPI: bus type USB registered
[ 9.105876] usbcore: registered new interface driver usbfs
[ 9.105890] usbcore: registered new interface driver hub
[ 9.105929] usbcore: registered new device driver usb
[ 9.105976] pps_core: LinuxPPS API ver. 1 registered
[ 9.105980] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 9.105988] PTP clock support registered
[ 9.106040] wmi: Mapper loaded
[ 9.106086] Advanced Linux Sound Architecture Driver Initialized.
[ 9.106091] PCI: Using ACPI for IRQ routing
[ 9.110886] PCI: pci_cache_line_size set to 64 bytes
[ 9.110981] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 9.110984] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 9.111515] Switched to clocksource xen
[ 9.111648] FS-Cache: Loaded
[ 9.111775] CacheFiles: Loaded
[ 9.111832] pnp: PnP ACPI init
[ 9.111977] system 00:00: [io 0x0680-0x069f] has been reserved
[ 9.111983] system 00:00: [io 0x1000-0x100f] has been reserved
[ 9.111988] system 00:00: [io 0xffff] has been reserved
[ 9.111992] system 00:00: [io 0xffff] has been reserved
[ 9.111997] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 9.112001] system 00:00: [io 0x0458-0x047f] has been reserved
[ 9.112007] system 00:00: [io 0x0500-0x057f] has been reserved
[ 9.112014] system 00:00: [io 0x164e-0x164f] has been reserved
[ 9.112022] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 9.112045] xen: registering gsi 8 triggering 1 polarity 0
[ 9.112089] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 9.112157] system 00:02: [io 0x0454-0x0457] has been reserved
[ 9.112164] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02
(active)
[ 9.112375] system 00:03: [io 0x0a00-0x0a1f] has been reserved
[ 9.112380] system 00:03: [io 0x0a30-0x0a3f] has been reserved
[ 9.112385] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 9.112389] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 9.112483] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 9.112489] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 9.112532] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 9.112834] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 9.112840] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 9.112844] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 9.112848] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 9.112853] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 9.112858] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 9.112862] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 9.112867] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 9.112871] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 9.112876] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[ 9.112880] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 9.112885] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 9.113089] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[ 9.113095] system 00:07: [mem 0x40004000-0x40004fff] has been reserved
[ 9.113099] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 9.113123] pnp: PnP ACPI: found 8 devices
[ 9.113134] xen_pciback: wants to seize 0000:02:00.0
[ 9.113137] xen_pciback: wants to seize 0000:00:19.0
[ 9.113146] pciback 0000:00:00.0: probing...
[ 9.113154] pciback 0000:00:02.0: probing...
[ 9.113160] pciback 0000:00:14.0: probing...
[ 9.113165] pciback 0000:00:16.0: probing...
[ 9.113171] pciback 0000:00:16.3: probing...
[ 9.113176] pciback 0000:00:19.0: probing...
[ 9.113178] pciback 0000:00:19.0: seizing device
[ 9.113182] pciback 0000:00:19.0: pcistub_device_alloc
[ 9.113184] pciback 0000:00:19.0: deferring initialization
[ 9.113189] pciback 0000:00:1a.0: probing...
[ 9.113194] pciback 0000:00:1b.0: probing...
[ 9.113200] pciback 0000:00:1c.0: probing...
[ 9.113205] pciback 0000:00:1c.2: probing...
[ 9.113210] pciback 0000:00:1d.0: probing...
[ 9.113216] pciback 0000:00:1f.0: probing...
[ 9.113221] pciback 0000:00:1f.2: probing...
[ 9.113226] pciback 0000:00:1f.3: probing...
[ 9.113232] pciback 0000:02:00.0: probing...
[ 9.113234] pciback 0000:02:00.0: seizing device
[ 9.113237] pciback 0000:02:00.0: pcistub_device_alloc
[ 9.113239] pciback 0000:02:00.0: deferring initialization
[ 9.124179] PM-Timer failed consistency check (0xffffff) - aborting.
[ 9.124231] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 9.124259] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 9.124272] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 9.124293] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 9.124296] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 9.124298] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 9.124301] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 9.124303] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 9.124306] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 9.124308] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 9.124311] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 9.124313] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 9.124316] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 9.124319] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 9.124352] NET: Registered protocol family 2
[ 9.124571] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 9.124604] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 9.124643] TCP: Hash tables configured (established 16384 bind 16384)
[ 9.124665] TCP: reno registered
[ 9.124671] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 9.124680] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 9.124730] NET: Registered protocol family 1
[ 9.124755] pci 0000:00:02.0: Video device with shadowed ROM
[ 9.124874] xen: registering gsi 16 triggering 0 polarity 1
[ 9.124889] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 9.125195] xen: registering gsi 16 triggering 0 polarity 1
[ 9.125198] Already setup the GSI :16
[ 9.143766] xen: registering gsi 23 triggering 0 polarity 1
[ 9.143779] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 9.163824] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 9.163895] Trying to unpack rootfs image as initramfs...
[ 9.178219] Freeing initrd memory: 16152K (ffff880004000000 -
ffff880004fc6000)
[ 9.178789] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32
Joules, 3 fixed counters 163840 ms ovfl timer
[ 9.190175] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 9.190506] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 9.190546] audit: initializing netlink subsys (disabled)
[ 9.190570] audit: type=2000 audit(1423580623.200:1): initialized
[ 9.190804] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 9.192706] VFS: Disk quotas dquot_6.5.2
[ 9.192754] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 9.193178] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 9.193307] ntfs: driver 2.1.31 [Flags: R/W].
[ 9.193440] fuse init (API version 7.23)
[ 9.200293] alg: No test for stdrng (krng)
[ 9.206606] NET: Registered protocol family 38
[ 9.206634] bounce: pool size: 64 pages
[ 9.206682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
249)
[ 9.206774] io scheduler noop registered
[ 9.206781] io scheduler deadline registered
[ 9.206829] io scheduler cfq registered (default)
[ 9.207027] xen: registering gsi 16 triggering 0 polarity 1
[ 9.207032] Already setup the GSI :16
[ 9.207231] xen: registering gsi 18 triggering 0 polarity 1
[ 9.207245] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 9.207397] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.207421] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 9.207427] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[ 9.207450] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver
version: 0.1
[ 9.207454] cpcihp_generic: not configured, disabling.
[ 9.207472] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.208913] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[ 9.208956] vmlfb: initializing
[ 14.207685] uvesafb: Getting VBE info block failed (eax=0x4f00, err=1)
[ 14.207696] uvesafb: vbe_init() failed with -22
[ 14.207709] uvesafb: probe of uvesafb.0 failed with error -22
[ 14.207754] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 14.207758] vesafb: scrolling: redraw
[ 14.207762] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 14.208858] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004500000,
using 6144k, total 32704k
[ 14.280805] Console: switching to colour frame buffer device 128x48
[ 14.353311] fb0: VESA VGA frame buffer device
[ 14.353956] vga16fb: initializing
[ 14.353959] vga16fb: mapped to 0xffff8800000a0000
[ 14.354595] checking generic (e0000000 1ff0000) vs hw (a0000 10000)
[ 14.354756] fb1: VGA16 VGA frame buffer device
[ 14.355375] intel_idle: MWAIT substates: 0x21120
[ 14.355377] intel_idle: v0.4 model 0x3A
[ 14.355379] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 14.355434] intel_idle: intel_idle yielding to none
[ 14.355451] ipmi message handler version 39.2
[ 14.356062] ipmi device interface
[ 14.356531] IPMI System Interface driver.
[ 14.357120] ipmi_si: Unable to find any System Interface(s)
[ 14.357874] IPMI Watchdog: driver initialized
[ 14.358467] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via
sys_reboot.
[ 14.360538] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 14.361672] ACPI: Power Button [PWRB]
[ 14.362218] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 14.363219] ACPI: Power Button [PWRF]
[ 14.364423] Monitor-Mwait will be used to enter C-1 state
[ 14.364531] Monitor-Mwait will be used to enter C-2 state
[ 14.365426] Warning: Processor Platform Limit not supported.
[ 14.366192] thermal LNXTHERM:00: registered as thermal_zone0
[ 14.366963] ACPI: Thermal Zone [TZ00] (28 C)
[ 14.367902] thermal LNXTHERM:01: registered as thermal_zone1
[ 14.368670] ACPI: Thermal Zone [TZ01] (30 C)
[ 14.369272] Error: Driver 'processor_aggregator' is already registered,
aborting...
[ 14.370789] xen:xen_evtchn: Event-channel device installed
[ 14.371824] pciback 0000:02:00.0: initializing...
[ 14.371829] pciback 0000:02:00.0: initializing config
[ 14.371879] pciback 0000:02:00.0: enabling device
[ 14.371944] xen: registering gsi 18 triggering 0 polarity 1
[ 14.371949] Already setup the GSI :18
[ 14.372457] pciback 0000:02:00.0: save state of device
[ 14.372582] pciback 0000:02:00.0: resetting (FLR, D3, etc) the device
[ 14.403788] pciback 0000:02:00.0: reset device
[ 14.403794] pciback 0000:02:00.0: xen_pcibk_reset_device: me heres
[ 14.404638] pciback 0000:02:00.0: xen_pcibk_control_isr: return !enable &&
!dev_data->isr_on enable:0 dev_data->isr_on:0
[ 14.406186] pciback 0000:00:19.0: initializing...
[ 14.406189] pciback 0000:00:19.0: initializing config
[ 14.406225] pciback 0000:00:19.0: enabling device
[ 14.406320] xen: registering gsi 20 triggering 0 polarity 1
[ 14.406340] xen: --> pirq=20 -> irq=20 (gsi=20)
[ 14.406372] pciback 0000:00:19.0: save state of device
[ 14.406435] pciback 0000:00:19.0: resetting (FLR, D3, etc) the device
[ 14.507741] pciback 0000:00:19.0: reset device
[ 14.507747] pciback 0000:00:19.0: xen_pcibk_reset_device: me heres
[ 14.538842] pciback 0000:00:19.0: xen_pcibk_control_isr: return !enable &&
!dev_data->isr_on enable:0 dev_data->isr_on:0
[ 14.571345] xen_pciback: backend is vpci
[ 14.603959] xen_acpi_processor: Uploading Xen processor PM info
[ 14.638237] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 14.660041] xen: registering gsi 19 triggering 0 polarity 1
[ 14.660052] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 14.680635] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200)
is a 16550A
[ 14.702044] hpet_acpi_add: no address or irqs in _CRS
[ 14.723497] Non-volatile memory driver v1.3
[ 14.744718] Linux agpgart interface v0.103
[ 14.765625] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds,
margin is 60 seconds).
[ 14.787219] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 14.855814] [drm] Initialized drm 1.1.0 20060810
[ 14.893780] drm/i810 does not support SMP
[ 14.918281] brd: module loaded
[ 14.941320] loop: module loaded
[ 14.962178] nbd: registered device at major 43
[ 14.985542] drbd: initialized. Version: 8.4.5 (api:1/proto:86-101)
[ 15.007162] drbd: built-in
[ 15.027335] drbd: registered as block device major 147
[ 15.047771] xen: registering gsi 16 triggering 0 polarity 1
[ 15.047775] Already setup the GSI :16
[ 15.073235] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042f conflicts with OpRegion
0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
[ 15.115810] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.137924] ACPI Warning: SystemIO range
0x0000000000000540-0x000000000000054f conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 15.182774] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.205922] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053f conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 15.253570] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.278381] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052f conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 15.329572] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.356150] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.382733] Loading iSCSI transport class v2.0-870.
[ 15.409348] hv_vmbus: registering driver hv_storvsc
[ 15.435428] ahci 0000:00:1f.2: version 3.0
[ 15.435495] xen: registering gsi 19 triggering 0 polarity 1
[ 15.435497] Already setup the GSI :19
[ 15.461249] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1
impl SATA mode
[ 15.487286] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems
apst
[ 15.513959] scsi host0: ahci
[ 15.540331] scsi host1: ahci
[ 15.579602] scsi host2: ahci
[ 15.618969] scsi host3: ahci
[ 15.658168] scsi host4: ahci
[ 15.683032] scsi host5: ahci
[ 15.706980] ata1: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36100
irq 56
[ 15.731152] ata2: DUMMY
[ 15.754921] ata3: DUMMY
[ 15.778191] ata4: DUMMY
[ 15.800907] ata5: DUMMY
[ 15.823140] ata6: DUMMY
[ 15.844645] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 15.867959] eql: Equalizer2002: Simon Janes (si...@ncm.com) and David S.
Miller (da...@redhat.com)
[ 15.900365] libphy: Fixed MDIO Bus: probed
[ 15.923920] tun: Universal TUN/TAP device driver, 1.6
[ 15.947217] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 15.970844] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 15.992983] e100: Copyright(c) 1999-2006 Intel Corporation
[ 16.014990] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 16.036993] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 16.058945] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 16.080951] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 16.103047] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
[ 16.125500] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 16.148014] igbvf: Intel(R) Gigabit Virtual Function Network Driver -
version 2.0.2-k
[ 16.167545] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 16.168092] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 16.168094] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 16.168095] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 16.168381] ata1.00: supports DRM functions and may not be fully accessible
[ 16.171226] ata1.00: disabling queued TRIM support
[ 16.171227] ata1.00: ATA-9: Crucial_CT120M500SSD3, MU05, max UDMA/133
[ 16.171228] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 16.174932] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 16.174934] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 16.174935] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 16.175223] ata1.00: supports DRM functions and may not be fully accessible
[ 16.178038] ata1.00: disabling queued TRIM support
[ 16.181240] ata1.00: configured for UDMA/133
[ 16.181371] scsi 0:0:0:0: Direct-Access ATA Crucial_CT120M50 MU05
PQ: 0 ANSI: 5
[ 16.181569] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.181582] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111
GiB)
[ 16.181583] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 16.181667] sd 0:0:0:0: [sda] Write Protect is off
[ 16.181669] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 16.181718] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 16.182154] sda: sda1
[ 16.182509] sd 0:0:0:0: [sda] Attached SCSI disk
[ 16.566170] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 16.585010] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version
4.0.1-k
[ 16.613693] ixgbe: Copyright (c) 1999-2014 Intel Corporation.
[ 16.631926] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function
Network Driver - version 2.12.1-k
[ 16.650577] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 16.669511] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 16.688894] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 16.708551] xen_netfront: Initialising Xen virtual ethernet driver
[ 16.728648] usbcore: registered new interface driver asix
[ 16.749029] usbcore: registered new interface driver ax88179_178a
[ 16.769397] xen: registering gsi 16 triggering 0 polarity 1
[ 16.769401] Already setup the GSI :16
[ 16.789239] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 16.809708] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 1
[ 16.830793] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 16.830910] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 16.852010] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 16.873421] usb usb1: Product: xHCI Host Controller
[ 16.894670] usb usb1: Manufacturer: Linux
3.19.0-creanuc-20150209-doflr-spurious-pcidb6+ xhci-hcd
[ 16.916200] usb usb1: SerialNumber: 0000:00:14.0
[ 16.937563] hub 1-0:1.0: USB hub found
[ 16.958546] hub 1-0:1.0: 4 ports detected
[ 16.979705] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 17.000776] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 2
[ 17.021719] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 17.042599] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 17.063379] usb usb2: Product: xHCI Host Controller
[ 17.084050] usb usb2: Manufacturer: Linux
3.19.0-creanuc-20150209-doflr-spurious-pcidb6+ xhci-hcd
[ 17.105308] usb usb2: SerialNumber: 0000:00:14.0
[ 17.126615] hub 2-0:1.0: USB hub found
[ 17.156665] hub 2-0:1.0: 4 ports detected
[ 17.177372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 17.197866] ehci-pci: EHCI PCI platform driver
[ 17.218122] xen: registering gsi 16 triggering 0 polarity 1
[ 17.218125] Already setup the GSI :16
[ 17.238322] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 17.258417] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 17.278541] ehci-pci 0000:00:1a.0: debug port 2
[ 17.302271] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 17.302309] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d38000
[ 17.403735] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 17.415612] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 17.415748] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 17.415753] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 17.415757] usb usb3: Product: EHCI Host Controller
[ 17.415760] usb usb3: Manufacturer: Linux
3.19.0-creanuc-20150209-doflr-spurious-pcidb6+ ehci_hcd
[ 17.415763] usb usb3: SerialNumber: 0000:00:1a.0
[ 17.416217] hub 3-0:1.0: USB hub found
[ 17.416234] hub 3-0:1.0: 3 ports detected
[ 17.416835] xen: registering gsi 23 triggering 0 polarity 1
[ 17.416843] Already setup the GSI :23
[ 17.416939] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 17.417167] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
number 4
[ 17.417213] ehci-pci 0000:00:1d.0: debug port 2
[ 17.421223] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 17.421266] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d37000
[ 17.427537] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 17.427581] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 17.427582] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 17.427583] usb usb4: Product: EHCI Host Controller
[ 17.427584] usb usb4: Manufacturer: Linux
3.19.0-creanuc-20150209-doflr-spurious-pcidb6+ ehci_hcd
[ 17.427585] usb usb4: SerialNumber: 0000:00:1d.0
[ 17.427719] hub 4-0:1.0: USB hub found
[ 17.427724] hub 4-0:1.0: 3 ports detected
[ 17.427847] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.427853] ohci-pci: OHCI PCI platform driver
[ 17.427867] ohci-platform: OHCI generic platform driver
[ 17.427879] uhci_hcd: USB Universal Host Controller Interface driver
[ 17.427919] usbcore: registered new interface driver usb-storage
[ 17.427949] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 18.469560] i8042: No controller found
[ 18.487084] hv_vmbus: registering driver hyperv_keyboard
[ 18.513828] mousedev: PS/2 mouse device common for all mice
[ 18.532001] rtc_cmos 00:01: RTC can wake from S4
[ 18.550088] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 18.588840] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 18.606766] i2c /dev entries driver
[ 18.624505] xen: registering gsi 18 triggering 0 polarity 1
[ 18.624508] Already setup the GSI :18
[ 18.642018] ACPI Warning: SystemIO range
0x000000000000f040-0x000000000000f05f conflicts with OpRegion
0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI)
[ 18.652791] usb 1-3: New USB device found, idVendor=0d8c, idProduct=013c
[ 18.652793] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 18.652794] usb 1-3: Product: USB PnP Sound Device
[ 18.652796] usb 1-3: Manufacturer: C-Media Electronics Inc.
[ 18.695548] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 18.695563] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 18.773585] (20141107/utaddress-258)
[ 18.810329] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 18.829874] pps_ldisc: PPS line discipline registered
[ 18.843975] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 18.843976] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 18.844014] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 18.844015] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 18.844211] hub 4-1:1.0: USB hub found
[ 18.844234] hub 3-1:1.0: USB hub found
[ 18.844314] hub 4-1:1.0: 8 ports detected
[ 18.844318] hub 3-1:1.0: 6 ports detected
[ 19.003098] w83627ehf: Found NCT6776F chip at 0xa30
[ 19.021697] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 19.040197] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 19.058790] iTCO_wdt: Found a Panther Point TCO device (Version=2,
TCOBASE=0x0460)
[ 19.077716] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 19.096512] iTCO_vendor_support: vendor-support=0
[ 19.115411] xen_wdt: Xen WatchDog Timer Driver v0.01
[ 19.115714] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
[ 19.153681] xen_wdt: cannot register miscdev on minor=130 (-16)
[ 19.172905] wdt: probe of wdt failed with error -16
[ 19.192189] softdog: Software Watchdog Timer: 0.08 initialized.
soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 19.212081] device-mapper: uevent: version 1.0.3
[ 19.224587] usb 4-1.5: New USB device found, idVendor=0b95, idProduct=772b
[ 19.224588] usb 4-1.5: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 19.224590] usb 4-1.5: Product: AX88772C
[ 19.224591] usb 4-1.5: Manufacturer: ASIX Elec. Corp.
[ 19.224592] usb 4-1.5: SerialNumber: 000001
[ 19.332261] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised:
dm-de...@redhat.com
[ 19.353238] device-mapper: multipath: version 1.7.0 loaded
[ 19.378145] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 19.398333] leds_ss4200: no LED devices found
[ 19.418244] hidraw: raw HID events driver (C) Jiri Kosina
[ 19.439583] input: C-Media Electronics Inc. USB PnP Sound Device as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.3/0003:0D8C:013C.0001/input/input2
[ 19.536401] hid-generic 0003:0D8C:013C.0001: input,hidraw0: USB HID v1.00
Device [C-Media Electronics Inc. USB PnP Sound Device] on
usb-0000:00:14.0-3/input3
[ 19.582742] usbcore: registered new interface driver usbhid
[ 19.604713] usbhid: USB HID core driver
[ 19.626657] hv_utils: Registering HyperV Utility Driver
[ 19.648274] hv_vmbus: registering driver hv_util
[ 19.676174] usbcore: registered new interface driver snd-usb-audio
[ 19.697050] usbcore: registered new interface driver snd-ua101
[ 19.717373] usbcore: registered new interface driver snd-usb-usx2y
[ 19.737529] usbcore: registered new interface driver snd-usb-us122l
[ 19.757362] usbcore: registered new interface driver snd-usb-caiaq
[ 19.777234] usbcore: registered new interface driver snd-usb-6fire
[ 19.796719] usbcore: registered new interface driver snd-usb-hiface
[ 19.816085] GACT probability on
[ 19.834848] Mirror/redirect action on
[ 19.853150] Simple TC action Loaded
[ 19.871262] netem: version 1.3
[ 19.889071] u32 classifier
[ 19.906693] Performance counters on
[ 19.924301] input device check on
[ 19.941692] Actions configured
[ 19.959238] Netfilter messages via NETLINK v0.30.
[ 19.977014] nfnl_acct: registering with nfnetlink.
[ 19.995114] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 20.013440] ctnetlink v0.93: registering with nfnetlink.
[ 20.031834] xt_time: kernel timezone is -0000
[ 20.049921] ip_set: protocol 6
[ 20.067711] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[ 20.085672] IPVS: Connection hash table configured (size=4096,
memory=64Kbytes)
[ 20.103826] IPVS: Creating netns size=1984 id=0
[ 20.121891] IPVS: ipvs loaded.
[ 20.139625] IPVS: [rr] scheduler registered.
[ 20.157218] IPVS: [wrr] scheduler registered.
[ 20.174698] IPVS: [lc] scheduler registered.
[ 20.191621] IPVS: [wlc] scheduler registered.
[ 20.208045] IPVS: [lblc] scheduler registered.
[ 20.224240] IPVS: [lblcr] scheduler registered.
[ 20.240380] IPVS: [dh] scheduler registered.
[ 20.256295] IPVS: [sh] scheduler registered.
[ 20.272038] IPVS: [sed] scheduler registered.
[ 20.287825] IPVS: [nq] scheduler registered.
[ 20.303319] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.318707] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 20.334257] arp_tables: (C) 2002 David S. Miller
[ 20.349671] TCP: cubic registered
[ 20.364895] Initializing XFRM netlink socket
[ 20.379731] NET: Registered protocol family 10
[ 20.394216] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 20.408059] NET: Registered protocol family 17
[ 20.421341] NET: Registered protocol family 15
[ 20.434240] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 20.461745] Ebtables v2.0 registered
[ 20.475683] NET: Registered protocol family 33
[ 20.489457] Key type rxrpc registered
[ 20.503445] asix 4-1.5:1.0 eth0: register 'asix' at usb-0000:00:1d.0-1.5,
ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:f7:a4:2a
[ 20.518624] Key type rxrpc_s registered
[ 20.534009] 8021q: 802.1Q VLAN Support v1.8
[ 20.563627] Key type dns_resolver registered
[ 20.579388] openvswitch: Open vSwitch switching datapath
[ 20.595474] mpls_gso: MPLS GSO support
[ 20.611921] registered taskstats version 1
[ 20.628834] Btrfs loaded
[ 20.667025] console [netcon0] enabled
[ 20.683211] netconsole: network logging started
[ 20.699507] rtc_cmos 00:01: setting system clock to 2015-02-10 15:03:54 UTC
(1423580634)
[ 20.716436] ALSA device list:
[ 20.733166] #0: C-Media Electronics Inc. USB PnP Sound Device at
usb-0000:00:14.0-3, full speed
[ 20.751193] Freeing unused kernel memory: 1016K (ffffffff81ee7000 -
ffffffff81fe5000)
[ 20.769102] Write protecting the kernel read-only data: 14336k
[ 20.790867] Freeing unused kernel memory: 1404K (ffff8800018a1000 -
ffff880001a00000)
[ 20.809545] Freeing unused kernel memory: 940K (ffff880001d15000 -
ffff880001e00000)
[ 20.928664] udevd[178]: starting version 175
[ 21.210257] random: lvm urandom read with 76 bits of entropy available
[ 21.503560] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 22.320379] udevd[477]: starting version 175
[ 22.913155] random: nonblocking pool is initialized
[ 23.014085] asix 4-1.5:1.0 eth-rescue: renamed from eth0
[ 24.105076] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 24.295094] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 25.715926] Adding 1949692k swap on /dev/mapper/creanuc-creanuc_swap.
Priority:-1 extents:1 across:1949692k SS
[ 26.144985] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts:
errors=remount-ro
[ 27.739668] IPv6: ADDRCONF(NETDEV_UP): eth-rescue: link is not ready
[ 27.792652] asix 4-1.5:1.0 eth-rescue: link down
[ 29.457637] IPv6: ADDRCONF(NETDEV_CHANGE): eth-rescue: link becomes ready
[ 29.481629] asix 4-1.5:1.0 eth-rescue: link up, 100Mbps, full-duplex, lpa
0x45E1
[ 34.820913] device xen_ovs_bridge entered promiscuous mode
[ 116.576695] device vif1.0-emu entered promiscuous mode
[ 116.621078] device vif1.0 entered promiscuous mode
[ 116.658291] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
[ 117.061148] pciback 0000:02:00.0: resetting (FLR, D3, bus) the device
[ 117.092324] pciback 0000:02:00.0: OK
[ 117.123935] pciback 0000:02:00.0: xen_pcibk_reset_device: me heres
[ 117.153042] pciback 0000:02:00.0: xen_pcibk_control_isr: return !enable &&
!dev_data->isr_on enable:0 dev_data->isr_on:0
[ 118.336807] pciback 0000:00:19.0: resetting (FLR, D3, ) the device
[ 118.371580] pci 0000:00:00.0: not owned by us!
[ 118.475884] pciback 0000:00:19.0: xen_pcibk_reset_device: me heres
[ 118.497516] pciback 0000:00:19.0: xen_pcibk_control_isr: return !enable &&
!dev_data->isr_on enable:0 dev_data->isr_on:0
[ 118.581239] xen-pciback pci-1-0: allocated pdev @ 0xffff88000007e9c0
[ 118.582466] xen-pciback pci-1-0: getting be setup
[ 118.582683] xen-pciback pci-1-0: exporting dom 0 bus 2 slot 0 func 0
[ 118.582688] xen_pciback: vpci: 0000:02:00.0: assign to virtual slot 0
[ 118.613355] pciback 0000:02:00.0: registering for 1
[ 118.635176] xen-pciback pci-1-0: exporting dom 0 bus 0 slot 19 func 0
[ 118.635180] xen_pciback: vpci: 0000:00:19.0: assign to virtual slot 1
[ 118.657663] pciback 0000:00:19.0: registering for 1
[ 118.682808] xen-pciback pci-1-0: Publishing pci roots
[ 118.682907] xen-pciback pci-1-0: writing root 0 at 0000:00
[ 118.686896] xen-pciback pci-1-0: fe state changed 1
[ 146.310213] xen-blkback:ring-ref 8, event-channel 19, protocol 1
(x86_64-abi) persistent grants
[ 146.844857] vif vif-1-0 vif1.0: Guest Rx ready
[ 146.866554] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
