Hi,
On 09/25/2017 01:53 PM, bharat gohil wrote:
Hello Andrii,
I tried but no success.
It looks, Xen is not running.
I am a bit confused... on one of the previous e-mail you posted log from
Xen:
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 272kB init memory.
So unless you have a completely new setup, Xen is definitely running.
However, what may happen is the serial driver in Xen does not receive
input characters.
One of the first test would be to check whether the driver effectively
receive characters.
Cheers,
Thanks,
Bharat
On Mon, Sep 25, 2017 at 5:45 PM, Andrii Anisov <andrii_ani...@epam.com
<mailto:andrii_ani...@epam.com>> wrote:
Hello Bharat,
On 25.09.17 11:42, bharat gohil wrote:
Hello Wilk,
I had try Ctrl+a three times and 'd' but no dump on the serial
console.
Its a way to switch to XEN debug console. In case you are using
minicom, you should press Ctrl+A six times, then you will see the
line like following:
(XEN) *** Serial input -> Xen (type 'CTRL-a' three times to
switch input to DOM0)
Then you can press 'h' for seeing installed key handlers.
But all of this requires XEN to be running somehow.
--
*Andrii Anisov*
--
Regards,
Bharat Gohil
Sr.Software Engineer
bharat.go...@harman.com <mailto:bharat.go...@harman.com>
+919427054633
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel