Expecting the ROM BAR to be written with an all ones value when sizing
the region is wrong - the low bit has another meaning (enable/disable)
and bits 1..10 are reserved. The PCI spec also mandates writing all
ones to just the address portion of the register.
Use suitable constants also for initializing the ROM BAR register field
description.
Signed-off-by: Jan Beulich <jbeul...@suse.com>
--- a/hw/xen/xen_pt.c
+++ b/hw/xen/xen_pt.c
@@ -248,7 +248,9 @@ static void xen_pt_pci_write_config(PCID
/* check unused BAR register */
index = xen_pt_bar_offset_to_index(addr);
- if ((index >= 0) && (val > 0 && val < XEN_PT_BAR_ALLF) &&
+ if ((index >= 0) && (val != 0) &&
+ (((index != PCI_ROM_SLOT) ?
+ val : (val | (uint32_t)~PCI_ROM_ADDRESS_MASK)) != XEN_PT_BAR_ALLF) &&
(s->bases[index].bar_flag == XEN_PT_BAR_FLAG_UNUSED)) {
XEN_PT_WARN(d, "Guest attempt to set address to unused Base Address "
"Register. (addr: 0x%02x, len: %d)\n", addr, len);
--- a/hw/xen/xen_pt_config_init.c
+++ b/hw/xen/xen_pt_config_init.c
@@ -726,8 +726,8 @@ static XenPTRegInfo xen_pt_emu_reg_heade
.offset = PCI_ROM_ADDRESS,
.size = 4,
.init_val = 0x00000000,
- .ro_mask = 0x000007FE,
- .emu_mask = 0xFFFFF800,
+ .ro_mask = ~PCI_ROM_ADDRESS_MASK & ~PCI_ROM_ADDRESS_ENABLE,
+ .emu_mask = (uint32_t)PCI_ROM_ADDRESS_MASK,
.init = xen_pt_bar_reg_init,
.u.dw.read = xen_pt_long_reg_read,
.u.dw.write = xen_pt_exp_rom_bar_reg_write,
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
