Il 29/07/2015 13:20, Wei Liu ha scritto:
On Wed, Jul 29, 2015 at 01:15:24PM +0200, Fabio Fantoni wrote:
[...]
(d14) BIOS map:
(d14) ffe00000-ffffffff: Main BIOS
(d14) E820 table:
(d14) [00]: 00000000:00000000 - 00000000:000a0000: RAM
(d14) HOLE: 00000000:000a0000 - 00000000:000f0000
(d14) [01]: 00000000:000f0000 - 00000000:00100000: RESERVED
(d14) [02]: 00000000:00100000 - 00000000:7eead000: RAM
(d14) HOLE: 00000000:7eead000 - 00000000:fc000000
(d14) [03]: 00000000:fc000000 - 00000001:00000000: RESERVED
(d14) Invoking OVMF ...
(XEN) irq.c:276: Dom14 PCI link 0 changed 5 -> 11
(XEN) irq.c:276: Dom14 PCI link 1 changed 10 -> 11
(XEN) irq.c:276: Dom14 PCI link 2 changed 11 -> 10
(XEN) irq.c:276: Dom14 PCI link 3 changed 5 -> 10
The strange thing is that I not found lines "Boot from" similar to domUs
with seabios instead, for example a w10 domU, seabios and boot='dc' and with
empty cdrom have also these lines:
Right. That's because OVMF doesn't write to the correct port. Sigh.
It requires recompiling OVMF to make it write to serial console, which
is probably too much trouble for you.
Another thing to try is to use VNC to connect to your DomU to see if
there is anything useful there.
Wei.
I use spice instead, output should be same even if quality and features
is better.
I remembered that ovmf from debian packages is compiled without debug, I
recompiled with ovmf included in xen-unstable instead.
After on first test I saw that boot correctly from cdrom.
I did other tests after remember that with serial='pty' I need to look
qemu log, see the port and do a cat on it (sorry for lost time
previously for my bad memory).
Without debug is too fast on boot is not possible but with this with
debug yes.
With ide (default) and boot='c' do strange things, boot from cdrom and
domU's serial output is:
cat /dev/pts/5
3h
3h
With hdtype='ahci' printed the output correctly but what did in boot is
still strange:
cat /dev/pts/4
Boot Failed. EFI Floppy
Boot Failed. EFI Floppy 1
Booting in insecure mode
System BootOrder not found. Initializing defaults.
device path:
"Acpi(PNP0A03,0)/Pci(2|0)/VenHw(3D3CA290-B9A5-11E3-B75D-B8AC6F7D65E6)/HD(Part1,SigF5D503AE-FD24-4E28-8D1B-8D0A2F97F0BC)/\EFI\fedora\shim.efi"
Creating boot entry "Boot0005" with label "Fedora" for file
"\EFI\fedora\shim.efi"
Booting in insecure mode
based on qemu configuration floppy should be not present and about the
boot order the strange thing is "System BootOrder not found.
Initializing defaults."
if you need more informations/tests tell me and I'll post them.
_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel
