On 01/06/2016 18:10, Tamas K Lengyel wrote:
Hi all,
Hi Tamas,
following the steps from http://wiki.xen.org/wiki/HiKey I'm unable to get the board to boot Xen. I'm using the Debian reference image from linaro as base (https://builds.96boards.org/releases/hikey/linaro/debian/latest/) and that boots fine both from the SD card directly and through startup.nsh. However, when I try to boot Xen I see only the following: Xen 4.7.0-rc (c/s Mon May 23 12:07:20 2016 +0100 git:8478c94-dirty) EFI loader Using configuration file 'xen.cfg' Image: 0x000000007a121000-0x000000007acb8a70 After that no output and dom0 never comes online on the network either. I tried compiling Xen on the device itself in case it was a problem with my cross-compile setup but no difference. Also with and without debug=y. Any tips on what might be going wrong here?
I gave a quick look at the upstream device-tree of the hikey, the path /smb/uart@f7113000.
If you use the upstream device-tree, it should be able to find the correct UART via "stdout-path" and therefore dtuart=... should not be necessary.
Let me know if it works for you, and I will update the wiki page. Regards, -- Julien Grall _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel