Hi Konrad, I have already specified that in my xen.cfg :
options=console=dtuart dom0_mem=512M dom0_max_vcpus=4 conswitch=x dtuart=/smb/uart@f7113000 kernel=Image console=hvc0 root=/dev/mmcblk1p4 rootwait rw dtb=hi6220-hikey.dtb Chen, I am using linux kernel from 96 boards repo: https://github.com/96boards/ linux.git <https://github.com/96boards/linux.git> and I compile using this command as below: make Image -j24 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts There was no dtb file produced after the compilation finished. But i saw a trace log mentioning , make: Nothing to be done for `arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts'. Correct me if the make command above is wrong? Thanks, Kamenee On Thu, Aug 18, 2016 at 3:46 PM, Konrad Rzeszutek Wilk < konrad.w...@oracle.com> wrote: > On Wed, Aug 17, 2016 at 06:30:23PM -0400, Kamenee Arumugam wrote: > > Hi Chen, > > > > My previous issue was resolved when i used hi6220-hikey.dtb from this > > source: https://github.com/kuscsik/device-linaro-hikey-kernel. When I > > download linux kernel, there doesn't seems to contain hi6220-hikey.dtb. > > > > But now it got stuck while loading Dom0 and below are log traces: > > > > > > (XEN) *** LOADING DOMAIN 0 *** > > (XEN) Loading kernel from boot module @ 000000007a037000 > > (XEN) Loading ramdisk from boot module @ 000000000ae00000 > > (XEN) Allocating 1:1 mappings totalling 512MB for dom0: > > (XEN) BANK[0] 0x00000040000000-0x00000060000000 (512MB) > > (XEN) Grant table range: 0x00000005c00000-0x00000005c54000 > > (XEN) Loading zImage from 000000007a037000 to > > 0000000040080000-0000000040ce8c00 > > (XEN) Loading dom0 initrd from 000000000ae00000 to > > 0x0000000048200000-0x0000000048a00000 > > (XEN) Allocating PPI 16 for event channel interrupt > > (XEN) Loading dom0 DTB to 0x0000000048000000-0x000000004800af11 > > (XEN) Scrubbing Free RAM on 1 nodes using 8 CPUs > > (XEN) ..done. > > (XEN) Initial low memory virq threshold set at 0x4000 pages. > > (XEN) Std. Loglevel: Errors and warnings > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > > (XEN) *** Serial input -> DOM0 (type 'CTRL-x' three times to switch input > > to Xen) > > (XEN) Freed 284kB init memory. > > (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 > > (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 > > (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 > > (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 > > (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 > > (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 > > (XEN) d0v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 > > (XEN) d0v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 > > > > It just hang there after the last line above. > > I have looked into those messages " d0v3: vGICD: unhandled word write > > 0xffffffff to ICACTIVER0" and linux kernel already taking care to ignore > > it. Therefore, I believe this is not contributing to there hang here. Any > > idea on this issue? > > It looks like you did not let the kernel use the console so nothing > was printed. > > Make sure you have 'console=hvc0' on your Linux line. >
_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org https://lists.xen.org/xen-devel