Implement SUSE specific unplug protocol for emulated PCI devices in PVonHVM guests. Its a simple 'outl(1, (ioaddr + 4));'. This protocol was implemented and used since Xen 3.0.4. It is used in all SUSE/SLES/openSUSE releases up to SLES11SP3 and openSUSE 12.3.
Signed-off-by: Olaf Hering <o...@aepfle.de> --- hw/i386/xen/xen_platform.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/hw/i386/xen/xen_platform.c b/hw/i386/xen/xen_platform.c index d94b53c..8802482 100644 --- a/hw/i386/xen/xen_platform.c +++ b/hw/i386/xen/xen_platform.c @@ -314,13 +314,42 @@ static void xen_platform_ioport_writeb(void *opaque, hwaddr addr, uint64_t val, unsigned int size) { PCIXenPlatformState *s = opaque; + PCIDevice *pci_dev = PCI_DEVICE(s); switch (addr) { case 0: /* Platform flags */ platform_fixed_ioport_writeb(opaque, 0, (uint32_t)val); break; + case 4: + if (val == 1) { + /* + * SUSE unplug for Xenlinux + * xen-kmp used this since xen-3.0.4, instead the official protocol from xen-3.3+ + * It did an unconditional "outl(1, (ioaddr + 4));" + * Pre VMDP 1.7 made use of 4 and 8 depending on how VMDP was configured. + * If VMDP was to control both disk and LAN it would use 4. + * If it controlled just disk or just LAN, it would use 8 below. + */ + blk_drain_all(); + blk_flush_all(); + pci_unplug_disks(pci_dev->bus); + pci_unplug_nics(pci_dev->bus); + } + break; case 8: - log_writeb(s, (uint32_t)val); + switch (val) { + case 1: + blk_drain_all(); + blk_flush_all(); + pci_unplug_disks(pci_dev->bus); + break; + case 2: + pci_unplug_nics(pci_dev->bus); + break; + default: + log_writeb(s, (uint32_t)val); + break; + } break; default: break; _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org https://lists.xen.org/xen-devel