Responses are inlined below.
Eric
On 01/16/2018 03:39 PM, Daniel Kiper wrote:
On Fri, Jan 12, 2018 at 03:21:13PM -0600, Eric DeVolder wrote:
When kexec is utilized in a Xen environment, it has an explicit
run-time dependency on libxenctrl.so. This dependency occurs
during the configure stage and when building kexec-tools.
When kexec is utilized in a non-Xen environment (either bare
metal or KVM), the configure and build of kexec-tools omits
any reference to libxenctrl.so.
[...]
Wow! What a long story! Patch looks quite good. Just a few nitpicks.
If you fix them then you can add Reviewed-by: Daniel Kiper
<daniel.ki...@oracle.com > to the next version.
Thanks, I've incorporated all these and added your RB and posted V4.
Signed-off-by: Eric DeVolder <eric.devol...@oracle.com>
---
v1: 29nov2017
- Daniel Kiper suggested Debian's libxen package of libraries,
but I did not find similar package on most other systems.
v2: 14dec2017
- Reposted to kexec and xen-devel mailing lists
v3: 12jan2018
- Incorporated feedback from Daniel Kiper.
Configure changes for --with-xen=dl, style problems corrected.
Extensive testing of the new mode.
---
configure.ac | 27 ++++++++++----
kexec/Makefile | 1 +
kexec/arch/i386/crashdump-x86.c | 4 +--
kexec/arch/i386/kexec-x86-common.c | 4 +--
kexec/crashdump-xen.c | 4 +--
kexec/kexec-xen.c | 41 ++++++++++++++++++++-
kexec/kexec-xen.h | 73 ++++++++++++++++++++++++++++++++++++++
7 files changed, 138 insertions(+), 16 deletions(-)
create mode 100644 kexec/kexec-xen.h
diff --git a/configure.ac b/configure.ac
index 208dc0a..4dab57f 100644
--- a/configure.ac
+++ b/configure.ac
@@ -167,12 +167,27 @@ if test "$with_xen" = yes ; then
AC_CHECK_HEADER(xenctrl.h,
[AC_CHECK_LIB(xenctrl, xc_kexec_load, ,
AC_MSG_NOTICE([Xen support disabled]))])
- if test "$ac_cv_lib_xenctrl_xc_kexec_load" = yes ; then
- AC_CHECK_LIB(xenctrl, xc_kexec_status,
- AC_DEFINE(HAVE_KEXEC_CMD_STATUS, 1,
- [The kexec_status call is available]),
- AC_MSG_NOTICE([The kexec_status call is not
available]))
- fi
+fi
+
+dnl Link libxenctrl.so at run-time rather than build-time
+if test "$with_xen" = dl ; then
+ AC_CHECK_HEADER(dlfcn.h,
+ [AC_CHECK_LIB(dl, dlopen, ,
+ AC_MSG_ERROR([Dynamic library linking not available]))],
+ AC_MSG_ERROR([Dynamic library linking not available]))
I think that this error message should be like this:
Dynamic library linking header not available
done
+ AC_DEFINE(CONFIG_LIBXENCTRL_DL, 1, [Define to 1 to link libxenctrl.so
at run-time rather than build-time])
+ AC_CHECK_HEADER(xenctrl.h,
+ [AC_CHECK_LIB(xenctrl, xc_kexec_load,
+ AC_DEFINE(HAVE_LIBXENCTRL, 1, ), # required define, and prevent
-lxenctrl
+ AC_MSG_NOTICE([Xen support disabled]))])
+fi
+
+dnl Check for the Xen kexec_status hypercall - reachable from --with-xen=yes|dl
+if test "$ac_cv_lib_xenctrl_xc_kexec_load" = yes ; then
+ AC_CHECK_LIB(xenctrl, xc_kexec_status,
+ AC_DEFINE(HAVE_KEXEC_CMD_STATUS, 1,
+ [The kexec_status call is available]),
+ AC_MSG_NOTICE([The kexec_status call is not available]))
fi
dnl ---Sanity checks
diff --git a/kexec/Makefile b/kexec/Makefile
index 2b4fb3d..8871731 100644
--- a/kexec/Makefile
+++ b/kexec/Makefile
@@ -36,6 +36,7 @@ dist += kexec/Makefile
\
kexec/kexec-elf-boot.h \
kexec/kexec-elf.h kexec/kexec-sha256.h \
kexec/kexec-zlib.h kexec/kexec-lzma.h \
+ kexec/kexec-xen.h
\
Could you fix backslash alignment? Maybe in separate patch. It can be
part of this series.
Turns out I had tabstop=4 and it should have been tabstop=8. I've
corrected my tabstop and the backslash alignment and everything aligns
now; no additional patch needed.
kexec/kexec-syscall.h kexec/kexec.h kexec/kexec.8
dist += kexec/proc_iomem.c
diff --git a/kexec/arch/i386/crashdump-x86.c b/kexec/arch/i386/crashdump-x86.c
index 69a063a..a948d9f 100644
--- a/kexec/arch/i386/crashdump-x86.c
+++ b/kexec/arch/i386/crashdump-x86.c
@@ -44,9 +44,7 @@
#include "kexec-x86.h"
#include "crashdump-x86.h"
Please remove this blank line...
done
-#ifdef HAVE_LIBXENCTRL
-#include <xenctrl.h>
-#endif /* HAVE_LIBXENCTRL */
+#include "../../kexec-xen.h"
...and this... Same things below... This was done to separate
conditional include from unconditional ones. So, blank lines
after your patch are no longer needed.
done
#include "x86-linux-setup.h"
diff --git a/kexec/arch/i386/kexec-x86-common.c
b/kexec/arch/i386/kexec-x86-common.c
index be03618..b44c8b7 100644
--- a/kexec/arch/i386/kexec-x86-common.c
+++ b/kexec/arch/i386/kexec-x86-common.c
@@ -40,9 +40,7 @@
#include "../../crashdump.h"
#include "kexec-x86.h"
Ditto...
done
-#ifdef HAVE_LIBXENCTRL
-#include <xenctrl.h>
-#endif /* HAVE_LIBXENCTRL */
+#include "../../kexec-xen.h"
But leave this one...
ok
/* Used below but not present in (older?) xenctrl.h */
#ifndef E820_PMEM
diff --git a/kexec/crashdump-xen.c b/kexec/crashdump-xen.c
index 60594f6..2e4cbdc 100644
--- a/kexec/crashdump-xen.c
+++ b/kexec/crashdump-xen.c
@@ -18,9 +18,7 @@
#include "config.h"
Ditto...
done
-#ifdef HAVE_LIBXENCTRL
-#include <xenctrl.h>
-#endif
+#include "kexec-xen.h"
But leave this one... And same rules below...
ok
struct crash_note_info {
unsigned long base;
diff --git a/kexec/kexec-xen.c b/kexec/kexec-xen.c
index 2b448d3..8ec3398 100644
--- a/kexec/kexec-xen.c
+++ b/kexec/kexec-xen.c
@@ -10,10 +10,49 @@
#include "config.h"
#ifdef HAVE_LIBXENCTRL
-#include <xenctrl.h>
+#include "kexec-xen.h"
#include "crashdump.h"
+#ifdef CONFIG_LIBXENCTRL_DL
+void *xc_dlhandle;
+xc_hypercall_buffer_t XC__HYPERCALL_BUFFER_NAME(HYPERCALL_BUFFER_NULL);
+xc_interface *__xc_interface_open(xentoollog_logger *logger,
+ xentoollog_logger *dombuild_logger,
+ unsigned open_flags)
+{
+ xc_interface *xch = NULL;
+
+ if (!xc_dlhandle)
+ xc_dlhandle = dlopen("libxenctrl.so", RTLD_NOW | RTLD_NODELETE);
+
+ if (xc_dlhandle) {
+ typedef xc_interface *(*func_t)(xentoollog_logger *logger,
+ xentoollog_logger *dombuild_logger,
+ unsigned open_flags);
+ func_t func = (func_t)dlsym(xc_dlhandle, "xc_interface_open");
I know your opinion about that definitions but I am not happy with them here.
However, if maintainer is OK with them I will not insist on changing that. Just
please add one extra line between definitions above and function call below.
I've added the extra line; and otherwise left the code as is.
+ xch = func(logger, dombuild_logger, open_flags);
+ }
+
+ return xch;
+}
+
+int __xc_interface_close(xc_interface *xch)
+{
+ int rc = -1;
+
+ if (xc_dlhandle) {
+ typedef int (*func_t)(xc_interface *xch);
+ func_t func = (func_t)dlsym(xc_dlhandle, "xc_interface_close");
Same as above... Please add empty line here...
done
+ rc = func(xch);
+
...and I think that you can drop this one here...
done
+ xc_dlhandle = NULL;
+ }
+
+ return rc;
+}
+#endif /* CONFIG_LIBXENCTRL_DL */
+
int xen_kexec_load(struct kexec_info *info)
{
uint32_t nr_segments = info->nr_segments;
diff --git a/kexec/kexec-xen.h b/kexec/kexec-xen.h
new file mode 100644
index 0000000..50e2b3d
--- /dev/null
+++ b/kexec/kexec-xen.h
@@ -0,0 +1,73 @@
+#ifndef KEXEC_XEN_H
+#define KEXEC_XEN_H
+
+#ifdef HAVE_LIBXENCTRL
I would add empty line here...
done
+#include <xenctrl.h>
+
+#ifdef CONFIG_LIBXENCTRL_DL
...and here...
done
+#include <dlfcn.h>
+
+/* The handle from dlopen(), needed by dlsym(), dlclose() */
+extern void *xc_dlhandle;
+
+/* Wrappers around xc_interface_open/close() to insert dlopen/dlclose() */
+xc_interface *__xc_interface_open(xentoollog_logger *logger,
+ xentoollog_logger *dombuild_logger,
+ unsigned open_flags);
+int __xc_interface_close(xc_interface *xch);
+
+/* GCC expression statements for evaluating dlsym() */
+#define __xc_call(dtype, name, args...) \
+( \
+ { dtype value; \
+ typedef dtype (*func_t)(xc_interface *, ...); \
+ func_t func = dlsym(xc_dlhandle, #name); \
+ value = func(args); \
+ value; } \
Please use one tab instead of spaces here.
done (all spaces converted to tabs)
+)
+#define __xc_data(dtype, name) \
+( \
+ { dtype *value = (dtype *)dlsym(xc_dlhandle, #name); \
+ value; } \
It looks that this code can fit into one line. Could you change that?
And one tab instead of spaces...
done
+)
+
+/* The wrappers around utilized xenctrl.h functions */
+#define xc_interface_open(a, b, c) \
+ __xc_interface_open(a, b, c)
I would put 2 tabs instead of spaces here and below...
done
+#define xc_interface_close(a) \
+ __xc_interface_close(a)
+#define xc_version(args...) \
+ __xc_call(int, xc_version, args)
+#define xc_get_max_cpus(args...) \
+ __xc_call(int, xc_get_max_cpus, args)
+#define xc_get_machine_memory_map(args...) \
+ __xc_call(int, xc_get_machine_memory_map, args)
+#define xc_kexec_get_range(args...) \
+ __xc_call(int, xc_kexec_get_range, args)
+#define xc_kexec_load(args...) \
+ __xc_call(int, xc_kexec_load, args)
+#define xc_kexec_unload(args...) \
+ __xc_call(int, xc_kexec_unload, args)
+#define xc_kexec_status(args...) \
+ __xc_call(int, xc_kexec_status, args)
+#define xc_kexec_exec(args...) \
+ __xc_call(int, xc_kexec_exec, args)
+#define xc_hypercall_buffer_array_create(args...) \
+ __xc_call(xc_hypercall_buffer_array_t *, xc_hypercall_buffer_array_create,
args)
+#define xc__hypercall_buffer_alloc_pages(args...) \
+ __xc_call(void *, xc__hypercall_buffer_alloc_pages, args)
+#define xc__hypercall_buffer_free_pages(args...) \
+ __xc_call(void , xc__hypercall_buffer_free_pages, args)
+#define xc__hypercall_buffer_array_alloc(args...) \
+ __xc_call(void *, xc__hypercall_buffer_array_alloc, args)
+#define xc__hypercall_buffer_array_get(args...) \
+ __xc_call(void *, xc__hypercall_buffer_array_get, args)
+#define xc_hypercall_buffer_array_destroy(args...) \
+ __xc_call(void *, xc_hypercall_buffer_array_destroy, args)
+
+#endif /* CONFIG_LIBXENCTRL_DL */
+
You can drop this empty line...
done
+#endif /* HAVE_LIBXENCTRL */
+
...and leave this one...
ok
+#endif /* KEXEC_XEN_H */
+
...and drop this one...
done
Thanks,
Daniel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel