Hi Stefano,
> -----Original Message-----
> From: Stefano Stabellini <sstabell...@kernel.org>
> Sent: 2021年8月27日 7:10
> To: Wei Chen <wei.c...@arm.com>
> Cc: xen-devel@lists.xenproject.org; sstabell...@kernel.org; jul...@xen.org;
> jbeul...@suse.com; Bertrand Marquis <bertrand.marq...@arm.com>
> Subject: Re: [XEN RFC PATCH 16/40] xen/arm: Create a fake NUMA node to use
> common code
>
> On Wed, 11 Aug 2021, Wei Chen wrote:
> > When CONFIG_NUMA is enabled for Arm, Xen will switch to use common
> > NUMA API instead of previous fake NUMA API. Before we parse NUMA
> > information from device tree or ACPI SRAT table, we need to init
> > the NUMA related variables, like cpu_to_node, as single node NUMA
> > system.
> >
> > So in this patch, we introduce a numa_init function for to
> > initialize these data structures as all resources belongs to node#0.
> > This will make the new API returns the same values as the fake API
> > has done.
> >
> > Signed-off-by: Wei Chen <wei.c...@arm.com>
> > ---
> > xen/arch/arm/numa.c | 53 ++++++++++++++++++++++++++++++++++++++
> > xen/arch/arm/setup.c | 8 ++++++
> > xen/include/asm-arm/numa.h | 11 ++++++++
> > 3 files changed, 72 insertions(+)
> >
> > diff --git a/xen/arch/arm/numa.c b/xen/arch/arm/numa.c
> > index 1e30c5bb13..566ad1e52b 100644
> > --- a/xen/arch/arm/numa.c
> > +++ b/xen/arch/arm/numa.c
> > @@ -20,6 +20,8 @@
> > #include <xen/init.h>
> > #include <xen/nodemask.h>
> > #include <xen/numa.h>
> > +#include <xen/pfn.h>
> > +#include <asm/setup.h>
> >
> > void numa_set_node(int cpu, nodeid_t nid)
> > {
> > @@ -29,3 +31,54 @@ void numa_set_node(int cpu, nodeid_t nid)
> >
> > cpu_to_node[cpu] = nid;
> > }
> > +
> > +void __init numa_init(bool acpi_off)
> > +{
> > + uint32_t idx;
> > + paddr_t ram_start = ~0;
> > + paddr_t ram_size = 0;
> > + paddr_t ram_end = 0;
> > +
> > + printk(XENLOG_WARNING
> > + "NUMA has not been supported yet, NUMA off!\n");
>
> NIT: please align
>
OK
>
> > + /* Arm NUMA has not been implemented until this patch */
>
> "Arm NUMA is not implemented yet"
>
OK
>
> > + numa_off = true;
> > +
> > + /*
> > + * Set all cpu_to_node mapping to 0, this will make cpu_to_node
> > + * function return 0 as previous fake cpu_to_node API.
> > + */
> > + for ( idx = 0; idx < NR_CPUS; idx++ )
> > + cpu_to_node[idx] = 0;
> > +
> > + /*
> > + * Make node_to_cpumask, node_spanned_pages and node_start_pfn
> > + * return as previous fake APIs.
> > + */
> > + for ( idx = 0; idx < MAX_NUMNODES; idx++ ) {
> > + node_to_cpumask[idx] = cpu_online_map;
> > + node_spanned_pages(idx) = (max_page - mfn_x(first_valid_mfn));
> > + node_start_pfn(idx) = (mfn_x(first_valid_mfn));
> > + }
>
> I just want to note that this works because MAX_NUMNODES is 1. If
> MAX_NUMNODES was > 1 then it would be wrong to set node_to_cpumask,
> node_spanned_pages and node_start_pfn for all nodes to the same values.
>
> It might be worth writing something about it in the in-code comment.
>
OK, I will do it.
>
> > + /*
> > + * Find the minimal and maximum address of RAM, NUMA will
> > + * build a memory to node mapping table for the whole range.
> > + */
> > + ram_start = bootinfo.mem.bank[0].start;
> > + ram_size = bootinfo.mem.bank[0].size;
> > + ram_end = ram_start + ram_size;
> > + for ( idx = 1 ; idx < bootinfo.mem.nr_banks; idx++ )
> > + {
> > + paddr_t bank_start = bootinfo.mem.bank[idx].start;
> > + paddr_t bank_size = bootinfo.mem.bank[idx].size;
> > + paddr_t bank_end = bank_start + bank_size;
> > +
> > + ram_size = ram_size + bank_size;
>
> ram_size is updated but not utilized
>
Ok, I will remove it.
>
> > + ram_start = min(ram_start, bank_start);
> > + ram_end = max(ram_end, bank_end);
> > + }
> > +
> > + numa_initmem_init(PFN_UP(ram_start), PFN_DOWN(ram_end));
> > + return;
> > +}
> > diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
> > index 63a908e325..3c58d2d441 100644
> > --- a/xen/arch/arm/setup.c
> > +++ b/xen/arch/arm/setup.c
> > @@ -30,6 +30,7 @@
> > #include <xen/init.h>
> > #include <xen/irq.h>
> > #include <xen/mm.h>
> > +#include <xen/numa.h>
> > #include <xen/param.h>
> > #include <xen/softirq.h>
> > #include <xen/keyhandler.h>
> > @@ -874,6 +875,13 @@ void __init start_xen(unsigned long
> boot_phys_offset,
> > /* Parse the ACPI tables for possible boot-time configuration */
> > acpi_boot_table_init();
> >
> > + /*
> > + * Try to initialize NUMA system, if failed, the system will
> > + * fallback to uniform system which means system has only 1
> > + * NUMA node.
> > + */
> > + numa_init(acpi_disabled);
> > +
> > end_boot_allocator();
> >
> > /*
> > diff --git a/xen/include/asm-arm/numa.h b/xen/include/asm-arm/numa.h
> > index b2982f9053..bb495a24e1 100644
> > --- a/xen/include/asm-arm/numa.h
> > +++ b/xen/include/asm-arm/numa.h
> > @@ -13,6 +13,16 @@ typedef u8 nodeid_t;
> > */
> > #define NODES_SHIFT 6
> >
> > +extern void numa_init(bool acpi_off);
> > +
> > +/*
> > + * Temporary for fake NUMA node, when CPU, memory and distance
> > + * matrix will be read from DTB or ACPI SRAT. The following
> > + * symbols will be removed.
> > + */
> > +extern mfn_t first_valid_mfn;
> > +#define __node_distance(a, b) (20)
> > +
> > #else
> >
> > /* Fake one node for now. See also node_online_map. */
> > @@ -35,6 +45,7 @@ extern mfn_t first_valid_mfn;
> > #define node_start_pfn(nid) (mfn_x(first_valid_mfn))
> > #define __node_distance(a, b) (20)
> >
> > +#define numa_init(x) do { } while (0)
> > #define numa_set_node(x, y) do { } while (0)
> >
> > #endif
> > --
> > 2.25.1
> >
