On 07/02/2022 08:29, Jan Beulich wrote:
> On 05.02.2022 10:47, Roger Pau Monné wrote:
>> On Fri, Feb 04, 2022 at 05:34:05PM +0000, Andrew Cooper wrote:
>>> c/s 27a63cdac388 ("x86/HVM: convert remaining hvm_funcs hook invocations to
>>> alt-call") went too far with dropping NULL function pointer checks.
> Oh, I'm sorry, I should have noticed this.
>
>>> smp_callin() calls hvm_cpu_up() unconditionally. When the platform doesn't
>>> support HVM, hvm_enable() exits without filling in hvm_funcs, after which
>>> the
>>> altcall pass nukes the (now unconditional) indirect call, causing:
>>>
>>> (XEN) ----[ Xen-4.17.0-10.18-d x86_64 debug=y Not tainted ]----
>>> (XEN) CPU: 1
>>> (XEN) RIP: e008:[<ffff82d04034bef5>] start_secondary+0x393/0x3b7
>>> (XEN) RFLAGS: 0000000000010086 CONTEXT: hypervisor
>>> ...
>>> (XEN) Xen code around <ffff82d04034bef5> (start_secondary+0x393/0x3b7):
>>> (XEN) ff ff 8b 05 1b 84 17 00 <0f> 0b 0f ff ff 90 89 c3 85 c0 0f 84 db
>>> fe ff ff
>>> ...
>>> (XEN) Xen call trace:
>>> (XEN) [<ffff82d04034bef5>] R start_secondary+0x393/0x3b7
>>> (XEN) [<ffff82d0402000e2>] F __high_start+0x42/0x60
>>>
>>> To make matters worse, __stop_this_cpu() calls hvm_cpu_down()
>>> unconditionally
>>> too, so what happen next is:
>>>
>>> (XEN) ----[ Xen-4.17.0-10.18-d x86_64 debug=y Not tainted ]----
>>> (XEN) CPU: 0
>>> (XEN) RIP: e008:[<ffff82d04034ab02>] __stop_this_cpu+0x12/0x3c
>>> (XEN) RFLAGS: 0000000000010046 CONTEXT: hypervisor
>>> ...
>>> (XEN) Xen code around <ffff82d04034ab02> (__stop_this_cpu+0x12/0x3c):
>>> (XEN) 48 89 e5 e8 8a 1d fd ff <0f> 0b 0f ff ff 90 0f 06 db e3 48 89 e0
>>> 48 0d ff
>>> ...
>>> (XEN) Xen call trace:
>>> (XEN) [<ffff82d04034ab02>] R __stop_this_cpu+0x12/0x3c
>>> (XEN) [<ffff82d04034ac15>] F smp_send_stop+0xdd/0xf8
>>> (XEN) [<ffff82d04034a229>] F machine_restart+0xa2/0x298
>>> (XEN) [<ffff82d04034a42a>] F
>>> arch/x86/shutdown.c#__machine_restart+0xb/0x11
>>> (XEN) [<ffff82d04022fd15>] F smp_call_function_interrupt+0xbf/0xea
>>> (XEN) [<ffff82d04034acc6>] F call_function_interrupt+0x35/0x37
>>> (XEN) [<ffff82d040331a70>] F do_IRQ+0xa3/0x6b5
>>> (XEN) [<ffff82d04039482a>] F common_interrupt+0x10a/0x120
>>> (XEN) [<ffff82d04031f649>] F __udelay+0x3a/0x51
>>> (XEN) [<ffff82d04034d5fb>] F __cpu_up+0x48f/0x734
>>> (XEN) [<ffff82d040203c2b>] F cpu_up+0x7d/0xde
>>> (XEN) [<ffff82d0404543d3>] F __start_xen+0x200b/0x2618
>>> (XEN) [<ffff82d0402000ef>] F __high_start+0x4f/0x60
>>>
>>> which recurses until hitting a stack overflow. The #DF handler, which
>>> resets
>>> its stack on each invocation, loops indefinitely.
>>>
>>> Reinstate the NULL function pointer checks for hvm_cpu_{up,down}().
>>>
>>> Fixes: 27a63cdac388 ("x86/HVM: convert remaining hvm_funcs hook invocations
>>> to alt-call")
>>> Signed-off-by: Andrew Cooper <andrew.coop...@citrix.com>
>> Reviewed-by: Roger Pau Monné <roger....@citrix.com>
> Reviewed-by: Jan Beulich <jbeul...@suse.com>
Thanks.
>
>>> ---
>>> CC: Jan Beulich <jbeul...@suse.com>
>>> CC: Roger Pau Monné <roger....@citrix.com>
>>> CC: Wei Liu <w...@xen.org>
>>>
>>> RFC. Not tested yet on the imacted hardware. It's a Xeon PHI with another
>>> werid thing in need of debugging. First boot is fine, while second
>>> boot (loading microcode this time) has a problem with vmx.
> Sounds not unfamiliar: My meanwhile oldish Romley needs to be cold-
> booted for VMX to actually be usable (not locked) on APs.
This is something which goes wrong as a consequence of loading microcode.
>>> I wonder if we want to modify the callers to check for HVM being enabled,
>>> rather than leaving the NULL pointer checks in a position where they're
>>> liable
>>> to be reaped again.
>> What about adding a couple of comments to hvm_cpu_{up,down} to note
>> they are called unconditionally regardless of whether HVM is present
>> or not?
> I second this as the perhaps better alternative: The S3 path is
> similarly affected (and you may want to mention this in the
> description), so this would mean up to 5 conditionals (at the
> source level) instead of the just two you get away with here.
Ok. I've added:
/* Called in boot/resume paths. Must cope with no HVM support. */
and:
/* Called in shutdown paths. Must cope with no HVM support. */
~Andrew
