> Subject: Re: [PATCH 3/3] xen/arm: Add i.MX8QM platform support
>
> Hi Peng,
>
> On 28/02/2022 01:07, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng....@nxp.com>
> >
> > Signed-off-by: Peng Fan <peng....@nxp.com>
> > ---
> > xen/arch/arm/Kconfig.debug | 3 +++
> > xen/arch/arm/platforms/Makefile | 1 +
> > xen/arch/arm/platforms/imx8qm.c | 44
> +++++++++++++++++++++++++++++++++
> > 3 files changed, 48 insertions(+)
> > create mode 100644 xen/arch/arm/platforms/imx8qm.c
> >
> > diff --git a/xen/arch/arm/Kconfig.debug b/xen/arch/arm/Kconfig.debug
> > index 9ecb446b3a..43ccd8fe62 100644
> > --- a/xen/arch/arm/Kconfig.debug
> > +++ b/xen/arch/arm/Kconfig.debug
> > @@ -143,6 +143,9 @@ choice
> > config EARLY_PRINTK_HIKEY960
> > bool "Early printk with pl011 with Hikey 960"
> > select EARLY_UART_PL011
> > + config EARLY_PRINTK_IMX8QM
> > + bool "Early printk with i.MX LPUART with i.MX8QM"
> > + select EARLY_UART_IMX_LPUART
>
> The goal of platform specific early printk is to select to UART address (see
> EARLY_UART_BASE_ADDRESS).
>
> However, we have deprecated them. So we should avoid adding new ones.
>
> > config EARLY_PRINTK_JUNO
> > bool "Early printk with pl011 on Juno platform"
> > select EARLY_UART_PL011
> > diff --git a/xen/arch/arm/platforms/Makefile
> > b/xen/arch/arm/platforms/Makefile index 8632f4115f..bec6e55d1f 100644
> > --- a/xen/arch/arm/platforms/Makefile
> > +++ b/xen/arch/arm/platforms/Makefile
> > @@ -9,5 +9,6 @@ obj-$(CONFIG_ALL_PLAT) += sunxi.o
> > obj-$(CONFIG_ALL64_PLAT) += thunderx.o
> > obj-$(CONFIG_ALL64_PLAT) += xgene-storm.o
> > obj-$(CONFIG_ALL64_PLAT) += brcm-raspberry-pi.o
> > +obj-$(CONFIG_ALL64_PLAT) += imx8qm.o
> > obj-$(CONFIG_MPSOC_PLATFORM) += xilinx-zynqmp.o
> > obj-$(CONFIG_MPSOC_PLATFORM) += xilinx-zynqmp-eemi.o diff --git
> > a/xen/arch/arm/platforms/imx8qm.c b/xen/arch/arm/platforms/imx8qm.c
> > new file mode 100644 index 0000000000..289c18e5f9
> > --- /dev/null
> > +++ b/xen/arch/arm/platforms/imx8qm.c
> > @@ -0,0 +1,44 @@
> > +/*
> > + * xen/arch/arm/platforms/imx8qm.c
> > + *
> > + * i.MX 8QM setup
> > + *
> > + * Copyright 2022 NXP
> > + *
> > + * Peng Fan <peng....@nxp.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <xen/delay.h>
> > +#include <xen/mm.h>
> > +#include <xen/vmap.h>
> > +#include <asm/io.h>
> > +#include <asm/platform.h>
> > +
> > +static const char * const imx8qm_dt_compat[] __initconst = {
> > + "fsl,imx8qm",
> > + NULL
> > +};
> > +
> > +PLATFORM_START(imx8qm, "i.MX 8")
> > + .compatible = imx8qm_dt_compat,
> > +PLATFORM_END
>
> We are only adding new platform definition when quirks are necessary. Do
> you need specific quirks for the i.MX8QM?
>
> A somewhat related question, is this series enough to boot Xen upstream on
> the board?
Boot xen upstream, no need specific quirk.
Thanks,
Peng.
>
> Cheers,
>
> --
> Julien Grall
