In IRQ/NMI induced VM exits, KVM VMX needs to execute the respective
handlers, which requires the software to create a FRED stack frame,
and use it to invoke the handlers. Add fred_irq_entry_from_kvm() for
this job.
Export fred_entry_from_kvm() because VMX can be compiled as a module.
Suggested-by: Sean Christopherson <sea...@google.com>
Tested-by: Shan Kang <shan.k...@intel.com>
Signed-off-by: Thomas Gleixner <t...@linutronix.de>
Signed-off-by: Xin Li <xin3...@intel.com>
---
Changes since v9:
* Shove the whole thing into arch/x86/entry/entry_64_fred.S for invoking
external_interrupt() and fred_exc_nmi() (Sean Christopherson).
* Correct and improve a few comments (Sean Christopherson).
* Merge the two IRQ/NMI asm entries into one as it's fine to invoke
noinstr code from regular code (Thomas Gleixner).
* Setup the long mode and NMI flags in the augmented SS field of FRED
stack frame in C instead of asm (Thomas Gleixner).
* Add UNWIND_HINT_{SAVE,RESTORE} to get rid of the warning: "objtool:
asm_fred_entry_from_kvm+0x0: unreachable instruction" (Peter Zijlstra).
Changes since v8:
* Add a new macro VMX_DO_FRED_EVENT_IRQOFF for FRED instead of
refactoring VMX_DO_EVENT_IRQOFF (Sean Christopherson).
* Do NOT use a trampoline, just LEA+PUSH the return RIP, PUSH the error
code, and jump to the FRED kernel entry point for NMI or call
external_interrupt() for IRQs (Sean Christopherson).
* Call external_interrupt() only when FRED is enabled, and convert the
non-FRED handling to external_interrupt() after FRED lands (Sean
Christopherson).
---
arch/x86/entry/entry_64_fred.S | 73 ++++++++++++++++++++++++++++++++++
arch/x86/entry/entry_fred.c | 14 +++++++
arch/x86/include/asm/fred.h | 18 +++++++++
3 files changed, 105 insertions(+)
diff --git a/arch/x86/entry/entry_64_fred.S b/arch/x86/entry/entry_64_fred.S
index d1c2fc4af8ae..f1088d6f2054 100644
--- a/arch/x86/entry/entry_64_fred.S
+++ b/arch/x86/entry/entry_64_fred.S
@@ -4,7 +4,9 @@
*/
#include <asm/asm.h>
+#include <asm/export.h>
#include <asm/fred.h>
+#include <asm/segment.h>
#include "calling.h"
@@ -54,3 +56,74 @@ SYM_CODE_START_NOALIGN(asm_fred_entrypoint_kernel)
FRED_EXIT
ERETS
SYM_CODE_END(asm_fred_entrypoint_kernel)
+
+#if IS_ENABLED(CONFIG_KVM_INTEL)
+SYM_FUNC_START(asm_fred_entry_from_kvm)
+ push %rbp
+ mov %rsp, %rbp
+
+ UNWIND_HINT_SAVE
+
+ /*
+ * Don't check the FRED stack level, the call stack leading to this
+ * helper is effectively constant and shallow (relatively speaking).
+ *
+ * Emulate the FRED-defined redzone and stack alignment.
+ */
+ sub $(FRED_CONFIG_REDZONE_AMOUNT << 6), %rsp
+ and $FRED_STACK_FRAME_RSP_MASK, %rsp
+
+ /*
+ * Start to push a FRED stack frame, which is always 64 bytes:
+ *
+ * +--------+-----------------+
+ * | Bytes | Usage |
+ * +--------+-----------------+
+ * | 63:56 | Reserved |
+ * | 55:48 | Event Data |
+ * | 47:40 | SS + Event Info |
+ * | 39:32 | RSP |
+ * | 31:24 | RFLAGS |
+ * | 23:16 | CS + Aux Info |
+ * | 15:8 | RIP |
+ * | 7:0 | Error Code |
+ * +--------+-----------------+
+ */
+ push $0 /* Reserved, must be 0 */
+ push $0 /* Event data, 0 for IRQ/NMI */
+ push %rdi /* fred_ss handed in by the caller */
+ push %rbp
+ pushf
+ mov $__KERNEL_CS, %rax
+ push %rax
+
+ /*
+ * Unlike the IDT event delivery, FRED _always_ pushes an error code
+ * after pushing the return RIP, thus the CALL instruction CANNOT be
+ * used here to push the return RIP, otherwise there is no chance to
+ * push an error code before invoking the IRQ/NMI handler.
+ *
+ * Use LEA to get the return RIP and push it, then push an error code.
+ */
+ lea 1f(%rip), %rax
+ push %rax /* Return RIP */
+ push $0 /* Error code, 0 for IRQ/NMI */
+
+ PUSH_AND_CLEAR_REGS clear_bp=0 unwind_hint=0
+ movq %rsp, %rdi /* %rdi -> pt_regs */
+ call __fred_entry_from_kvm /* Call the C entry point */
+ POP_REGS
+ ERETS
+1:
+ /*
+ * Objtool doesn't understand what ERETS does, this hint tells it that
+ * yes, we'll reach here and with what stack state. A save/restore pair
+ * isn't strictly needed, but it's the simplest form.
+ */
+ UNWIND_HINT_RESTORE
+ pop %rbp
+ RET
+
+SYM_FUNC_END(asm_fred_entry_from_kvm)
+EXPORT_SYMBOL_GPL(asm_fred_entry_from_kvm);
+#endif
diff --git a/arch/x86/entry/entry_fred.c b/arch/x86/entry/entry_fred.c
index 2fd3e421e066..f8774611af80 100644
--- a/arch/x86/entry/entry_fred.c
+++ b/arch/x86/entry/entry_fred.c
@@ -242,3 +242,17 @@ __visible noinstr void fred_entry_from_kernel(struct
pt_regs *regs)
return fred_bad_type(regs, error_code);
}
}
+
+#if IS_ENABLED(CONFIG_KVM_INTEL)
+__visible noinstr void __fred_entry_from_kvm(struct pt_regs *regs)
+{
+ switch (regs->fred_ss.type) {
+ case EVENT_TYPE_EXTINT:
+ return fred_extint(regs);
+ case EVENT_TYPE_NMI:
+ return fred_exc_nmi(regs);
+ default:
+ WARN_ON_ONCE(1);
+ }
+}
+#endif
diff --git a/arch/x86/include/asm/fred.h b/arch/x86/include/asm/fred.h
index 16a64ffecbf8..2fa9f34e5c95 100644
--- a/arch/x86/include/asm/fred.h
+++ b/arch/x86/include/asm/fred.h
@@ -9,6 +9,7 @@
#include <linux/const.h>
#include <asm/asm.h>
+#include <asm/trapnr.h>
/*
* FRED event return instruction opcodes for ERET{S,U}; supported in
@@ -62,12 +63,29 @@ static __always_inline unsigned long fred_event_data(struct
pt_regs *regs)
void asm_fred_entrypoint_user(void);
void asm_fred_entrypoint_kernel(void);
+void asm_fred_entry_from_kvm(struct fred_ss);
__visible void fred_entry_from_user(struct pt_regs *regs);
__visible void fred_entry_from_kernel(struct pt_regs *regs);
+__visible void __fred_entry_from_kvm(struct pt_regs *regs);
+
+/* Can be called from noinstr code, thus __always_inline */
+static __always_inline void fred_entry_from_kvm(unsigned int type, unsigned
int vector)
+{
+ struct fred_ss ss = {
+ .ss =__KERNEL_DS,
+ .type = type,
+ .vector = vector,
+ .nmi = type == EVENT_TYPE_NMI,
+ .lm = 1,
+ };
+
+ asm_fred_entry_from_kvm(ss);
+}
#else /* CONFIG_X86_FRED */
static __always_inline unsigned long fred_event_data(struct pt_regs *regs) {
return 0; }
+static __always_inline void fred_entry_from_kvm(unsigned int type, unsigned
int vector) { }
#endif /* CONFIG_X86_FRED */
#endif /* !__ASSEMBLY__ */
--
2.34.1
