On 18/05/2020 03:04, Volodymyr Babchuk wrote:
Hi Julien,
Hi,
On Mon, 2020-05-11 at 10:34 +0100, Julien Grall wrote:
Hi Volodymyr,
On 06/05/2020 02:44, Volodymyr Babchuk wrote:
Normal World can share buffer with OP-TEE for two reasons:
1. Some client application wants to exchange data with TA
2. OP-TEE asks for shared buffer for internal needs
The second case was handle more strictly than necessary:
1. In RPC request OP-TEE asks for buffer
2. NW allocates buffer and provides it via RPC response
3. Xen pins pages and translates data
4. Xen provides buffer to OP-TEE
5. OP-TEE uses it
6. OP-TEE sends request to free the buffer
7. NW frees the buffer and sends the RPC response
8. Xen unpins pages and forgets about the buffer
The problem is that Xen should forget about buffer in between stages 6
and 7. I.e. the right flow should be like this:
6. OP-TEE sends request to free the buffer
7. Xen unpins pages and forgets about the buffer
8. NW frees the buffer and sends the RPC response
This is because OP-TEE internally frees the buffer before sending the
"free SHM buffer" request. So we have no reason to hold reference for
this buffer anymore. Moreover, in multiprocessor systems NW have time
to reuse buffer cookie for another buffer. Xen complained about this
and denied the new buffer registration. I have seen this issue while
running tests on iMX SoC.
So, this patch basically corrects that behavior by freeing the buffer
earlier, when handling RPC return from OP-TEE.
Signed-off-by: Volodymyr Babchuk <volodymyr_babc...@epam.com>
---
xen/arch/arm/tee/optee.c | 24 ++++++++++++++++++++----
1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/xen/arch/arm/tee/optee.c b/xen/arch/arm/tee/optee.c
index 6a035355db..af19fc31f8 100644
--- a/xen/arch/arm/tee/optee.c
+++ b/xen/arch/arm/tee/optee.c
@@ -1099,6 +1099,26 @@ static int handle_rpc_return(struct optee_domain *ctx,
if ( shm_rpc->xen_arg->cmd == OPTEE_RPC_CMD_SHM_ALLOC )
call->rpc_buffer_type = shm_rpc->xen_arg->params[0].u.value.a;
+ /*
+ * OP-TEE signals that it frees the buffer that it requested
+ * before. This is the right for us to do the same.
+ */
+ if ( shm_rpc->xen_arg->cmd == OPTEE_RPC_CMD_SHM_FREE )
+ {
+ uint64_t cookie = shm_rpc->xen_arg->params[0].u.value.b;
+
+ free_optee_shm_buf(ctx, cookie);
+
+ /*
+ * This should never happen. We have a bug either in the
+ * OP-TEE or in the mediator.
+ */
+ if ( call->rpc_data_cookie && call->rpc_data_cookie != cookie )
+ gprintk(XENLOG_ERR,
+ "Saved RPC cookie does not corresponds to OP-TEE's (%"PRIx64" !=
%"PRIx64")\n",
s/corresponds/correspond/
Will fix in the next version.
+ call->rpc_data_cookie, cookie);
IIUC, if you free the wrong SHM buffer then your guest is likely to be
running incorrectly afterwards. So shouldn't we crash the guest to avoid
further issue?
Well, we freed the exact buffer that OP-TEE asked us to free. So guest
didn't anything bad. Moreover, optee driver in Linux kernel does not
have similar check, so it will free this buffer without any complains.
I'm just being overcautious here. Thus, I see no reason to crash the
guest.
My point is not whether the guest did anything bad but whether
acknowledging a bug and continuing like nothing happened is the right
thing to do.
I can't judge whether the bug is critical enough. However I don't
consider a single message on the console to be sufficient in a case of a
bug. This is likely going to be missed and it may cause side-effect
which may only be noticed a long time after. The amount of debugging
required to figure out the original problem may be quite consequent.
The first suggestion would be to expand your comment and explain why it
is fine continue.
Secondly, if it is consider safe to continue but still needs attention,
then I would suggest to add a WARN() to make easier to spot in the log.
Cheers,
--
Julien Grall