Mark Johnson wrote: > > > Menno Lageman wrote: >> Mark Johnson wrote: >>> >>> Menno Lageman wrote: >>>> I'm having trouble booting snv_76 under xVM on one of my systems >>>> (Tyan 2885). It boots fine on metal, but when booting under xVM it >>>> panics with a 'cannot mount root path' with this call stack: >>>> >>>> genunix:rootconf+11f() >>>> genunix:vfs_mountroot+65() >>>> genunix:main+d3() >>>> unix:_locore_start+80() >>>> >>>> The device path shown is the correct devicepath to the rootdisk, it >>>> is the same as when booted successfully on metal. >>> >>> What kind of disk adapter do you have? Does it use >>> cadp160 for a driver by chance? >>> >> >> No, this system has an on-board Silicon Image 3114 SATA controller >> used in PATA compatibility mode. > > Usually this is a sign that the driver for the disk > was installed under /platform/i86pc/kernel/drv/[amd64] > > No idea if you using compatibility mode? If you boot > with kmdb, can you poke around? e.g. $c, etc. >
Yes, I can poke around. ::msgbuf shows the following warnings: WARNING: Cannot load psm pcplusmp WARNING: cannot load platform pm driver ppm Menno -- Menno Lageman - Sun Microsystems - http://blogs.sun.com/menno _______________________________________________ xen-discuss mailing list [email protected]
