Hi,
I'm running Nevada 75a configured as dom0. I added a domU HVM running
Nevada 75a, on a Sun X4600 with 8 ADM Dual cores. I can get the domU
installed and configured, however, I can not get any network
connectivity. I followed the steps accoding to documents on Open
Solaris. I also followed some of the threads of the list to verify the
configuration, but I can not fix the problem. Here is the configuration
Before installing the domain on dom0
# dladm show-link
e1000g0 type: non-vlan mtu: 1500 device: e1000g0
e1000g1 type: non-vlan mtu: 1500 device: e1000g1
e1000g2 type: non-vlan mtu: 1500 device: e1000g2
e1000g3 type: non-vlan mtu: 1500 device: e1000g3
#svccfg -s xvm/xend listprop | grep nic
config/default-nic astring e1000g0
#/usr/lib/xen/bin/xenstore-read device-misc/vif/default-nic
e1000g0
I configured the domU with the following command:
virt-install -n solarisHVM --hvm --vnc -r 10240 -f
/xvm/solarisHVM/root.img -s 16 -c /iso/sol-os-platform-dvd.iso
After the domain is configured I open a window on the domU, and try to
ping or telnet to the dom0 or other systems, but no reply, here is the
configuration after the domU is installed
#dladm show-link
e1000g0 type: non-vlan mtu: 1500 device: e1000g0
e1000g1 type: non-vlan mtu: 1500 device: e1000g1
e1000g2 type: non-vlan mtu: 1500 device: e1000g2
e1000g3 type: non-vlan mtu: 1500 device: e1000g3
vnic900 type: non-vlan mtu: 1500 device: vnic900
# /usr/lib/vna
900 e1000g0 0:16:3e:35:68:ca
#xm network-list solarisHVM
Idx BE MAC Addr. handle state evt-ch tx-/rx-ring-ref BE-path
0 0 ?? 0 1 -1 -1 /-1
/local/domain/0/backend/vif/4/0
form #vrish dumpxml solarisHVM
<devices>
<emulator>/usr/lib/xen/bin/qemu-dm</emulator>
<interface type='ethernet'>
<mac address='00:16:3e:35:68:ca'/>
</interface>
from #xm list solarisHVM -l
(device
(vif
(bridge )
(mac 00:16:3e:35:68:ca)
(type ioemu)
(uuid 35db826b-987a-b4cf-ae98-7d6a197e7650)
)
)
from within the domain
#ifconfig -a
rtls0: flgas-201000843<UP,BROADCAST, RUNNING,MULTICAST,IPv4,CoS> mtu
1500 index 2
inet 10.6.142.179 netmask ffffff00 broadcast 10.6.142.255
ether 0:16:3e:35:68:ca
From the output I can see that the rtls0 mac address in the domU is the
same from xm list and from the dumpxml on dom0. I do not understand why
the mac address does not show on the xm network-list solarisHVM.
I can plumb vnic900 on dom0, configure an IP address and ping it, but I
then unplumb it.
If I create a Solaris PV domU, I do not have any issues, I can connect
to and from other systems to the domU.
It looks like I'm missing a step that links the vnic900 to the rtls0,
but I'm running out of ideas. Any hints on how to link e1000g0 or
vnic900 to my domU, or how to solve the issue are appreciated.
Thanks,
--
+-----------------------------------------------+
Jairo Cardozo H
Benchmark Engineer
Sun Solution Centers
[EMAIL PROTECTED]
Ext: 87013
Phone: 650-786-7013
+-----------------------------------------------+
_______________________________________________
xen-discuss mailing list
[email protected]
