jkeil,
Thanks for the hint. I tried with no success. Here is what I run
# xm list
Name ID Mem VCPUs State
Time(s)
Domain-0 0 5547 16 r-----
63198.4
solarisHVM1 23 12288 1 r-----
1265.0
solarisPV1 21 12288 4
-b---- 275.3
# xm block-attach solarisHVM1
file:/domains/solarisHVM1/disk1.img
hdc w
# xm block-list solarisHVM1
Vdev BE handle state evt-ch ring-ref BE-path
768 0 0 1 -1 -1 /local/domain/0/backend/vbd/23/768
5632 0 0 1 -1 -1
/local/domain/0/backend/vbd/23/5632
However, when I search for the new device on the solarisHVM1 domain, I
can not see it
solarisHVM1#ls /dev/dsk
c0d0p0 c0d0s1 c0d0s15 c0d0s7 c1t0d0p3 c1t0d0s12
c1t0d0s4
c0d0p1 c0d0s10 c0d0s2 c0d0s8 c1t0d0p4 c1t0d0s13
c1t0d0s5
c0d0p2 c0d0s11 c0d0s3 c0d0s9 c1t0d0s0 c1t0d0s14
c1t0d0s6
c0d0p3 c0d0s12 c0d0s4 c1t0d0p0 c1t0d0s1 c1t0d0s15
c1t0d0s7
c0d0p4 c0d0s13 c0d0s5 c1t0d0p1 c1t0d0s10 c1t0d0s2
c1t0d0s8
c0d0s0 c0d0s14 c0d0s6 c1t0d0p2 c1t0d0s11 c1t0d0s3
c1t0d0s9
solarisHVM1# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0d0 <DEFAULT cyl 4565 alt 2 hd 255 sec 63>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
Specify disk (enter its number):
I run devfsadm, and still do not see the device on solarisHVM1. I have
to note however, that the steps I described on my original posting do
work on PV domains., therefore I guess this is an issue only with HVM
domains
Anyother thing I might be doing wrong on the HVM domain ??
thanks,
J. Cardozo
> I'm running snv_90 and created a Solaris 10 u4 HVM (solarisHVM1)
guest domain.
> I'm following this procedure to add a block device to my guest
domain:
> # xm block-attach solarisHVM1
file:/dom1/disk1.img
2 w
For a HVM domU, you must use something like hda, hdb, hdc, hdd
as the FrontDev, not "2".
Try
xm block-attach solarisHVM1
file:/dom1/disk1.img hdc w
-------- Original Message --------
Hi,
I'm running snv_90 and created a Solaris 10 u4 HVM (solarisHVM1) guest
domain. I'm following this procedure to add a block device to my
guest domain:
# xm block-list solarisHVM1
Vdev BE handle state evt-ch ring-ref BE-path
768 0 0 1 -1 -1 /local/domain/0/backend/vbd/9/768
Create the image file
#dd if=/dev/zero of=/dom1/disk1.img bs=1024k seek=8192 count=1
Add block device
#xm block-attach solarisHVM1
file:/dom1/disk1.img
2 w
List block devices
#xm block-list solarisHVM1
Vdev BE handle state evt-ch ring-ref BE-path
768 0 0 1 -1 -1 /local/domain/0/backend/vbd/10/768
2 0 0 1 -1 -1 /local/domain/0/backend/vbd/10/2
some output from
#xm list solarisHVM1 -l
(device
(vbd
(uname
file:/domains/solarisHVM1/root.img)
(uuid d843dcb0-3a20-ef2d-919d-6247a7a9dd21)
(mode w)
(dev hda:disk)
(backend 0)
(bootable 1)
)
)
(device
(vbd
(uname
file:/dom1/disk1.img)
(uuid 6347a698-d345-0dba-709e-5155a0e60c4c)
(mode w)
(dev 2:disk)
(backend 0)
(bootable 0)
)
After running devfsadm in my guest domain, the new device does not show
up
# ls /dev/dsk
c0d0p0 c0d0s1 c0d0s15 c0d0s7 c1t0d0p3 c1t0d0s12
c1t0d0s4
c0d0p1 c0d0s10 c0d0s2 c0d0s8 c1t0d0p4 c1t0d0s13
c1t0d0s5
c0d0p2 c0d0s11 c0d0s3 c0d0s9 c1t0d0s0 c1t0d0s14
c1t0d0s6
c0d0p3 c0d0s12 c0d0s4 c1t0d0p0 c1t0d0s1 c1t0d0s15
c1t0d0s7
c0d0p4 c0d0s13 c0d0s5 c1t0d0p1 c1t0d0s10 c1t0d0s2
c1t0d0s8
c0d0s0 c0d0s14 c0d0s6 c1t0d0p2 c1t0d0s11 c1t0d0s3
c1t0d0s9
I tried different options, including adding the device while the domain
was down and rebooting the solarisHVM1 domain, but nothing seem to
work. Previous to running snv_90 I was running svn_82 and that I was
being affected by bug
6656611, which was fixed in
snv_85. However, I can not get it to work.
Any ideas,hints, suggestions, or corrections (if I'm doing something
wrong) on how to solve this issue are much appreciated.
Thanks,
Jairo Cardozo
--
+-----------------------------------------------+
Jairo Cardozo H
Benchmark Engineer
Sun Solution Centers
[EMAIL PROTECTED]
Ext: 87013
Phone: 650-786-7013
+-----------------------------------------------+
