Hi,
im trying to attach another volume aka disk to win HVM, however it
doesn't seem to work:
+ xm block-attach win2008ss phy:/dev/zvol/dsk/pool1/win2008ss.dsk2 \
hdd:disk w 0
results in:
elkner.sol ~ > + xm block-list win2008ss --long
(0
(vbd
(uuid 7cb8fadf-619d-dde6-bda9-dcc18023c7d5)
(bootable 1)
(devid 768)
(driver paravirtualised)
(dev hda:disk)
(uname phy:/dev/zvol/dsk/pool1/win2008ss.dsk)
(mode w)
(backend 0)
)
)
(1
(vbd
(uuid fbbc4777-3d56-cc87-e7ea-b4cc2ec17ffc)
(bootable 0)
(devid 5632)
(driver paravirtualised)
(dev hdc:cdrom)
(uname file:/pool1/isos/win2008_x86.iso)
(mode r)
(backend 0)
)
)
(2
(vbd
(uuid 0b7f34c8-2f0a-0f0d-8004-7ebf752035e6)
(bootable 0)
(driver paravirtualised)
(dev hdd:disk)
(uname phy:/dev/zvol/dsk/pool1/win2008ss.dsk2)
(mode w)
(backend 0)
)
)
elkner.sol ~ > + virsh start win2008ss libvir: Xen Daemon error : POST
operation failed: (xend.err 'Device 768 (vbd) could not be connected.
Backend device not found.')
error: Failed to start domain win2008ss
elkner.sol ~ > + xm block-list win2008ss --long
(0
(vbd
(uuid 7cb8fadf-619d-dde6-bda9-dcc18023c7d5)
(bootable 1)
(devid 768)
(driver paravirtualised)
(dev hda:disk)
(uname phy:/dev/zvol/dsk/pool1/win2008ss.dsk)
(mode w)
(backend 0)
)
)
(1
(vbd
(uuid fbbc4777-3d56-cc87-e7ea-b4cc2ec17ffc)
(bootable 0)
(devid 5632)
(driver paravirtualised)
(dev hdc:cdrom)
(uname file:/pool1/isos/win2008_x86.iso)
(mode r)
(backend 0)
)
)
(2
(vbd
(uuid 0b7f34c8-2f0a-0f0d-8004-7ebf752035e6)
(bootable 0)
(devid 5696)
(driver paravirtualised)
(dev hdd:disk)
(uname phy:/dev/zvol/dsk/pool1/win2008ss.dsk2)
(mode w)
(backend 0)
)
)
When removing the device (xm block-detach win2008ss 5696), everything
runs fine again. Any hints, what to do?
Regards,
jel.
--
Otto-von-Guericke University http://www.cs.uni-magdeburg.de/
Department of Computer Science Geb. 29 R 027, Universitaetsplatz 2
39106 Magdeburg, Germany Tel: +49 391 67 12768
_______________________________________________
xen-discuss mailing list
[email protected]
