FYI here's what I see when I boot the LiveCD and import rpool after an install.
In this case I rebooted after the install and unsuccessfully attempted to boot
the domU. Then I used my install config (with the CD and boot kernel/microroot)
to boot back to the LiveCD and inspect the disk.
--cut here--
<pre>
j...@opensolaris:~# zpool import rpool
cannot import 'rpool': pool may be in use from other system, it was last
accessed by opensolaris (hostid: 0x32851) on Wed Jul 1 13:06:05 2009
use '-f' to import anyway
j...@opensolaris:~# zpool import -f rpool
j...@opensolaris:~# zpool status
pool: rpool
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
c7d0s0 ONLINE 0 0 0
errors: No known data errors
j...@opensolaris:~# zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 3.70G 6.08G 74K /rpool
rpool/ROOT 2.82G 6.08G 19K legacy
rpool/ROOT/opensolaris 2.82G 6.08G 2.82G /
rpool/dump 384M 6.08G 384M -
rpool/export 63.5K 6.08G 21K /export
rpool/export/home 42.5K 6.08G 21K /export/home
rpool/export/home/spectra 21.5K 6.08G 21.5K /export/home/spectra
rpool/swap 512M 6.43G 157M -
</pre>
--
This message posted from opensolaris.org
_______________________________________________
xen-discuss mailing list
[email protected]
