Hi Mark, what worries me right now most ist the kind of configuration.
if this is the kind of configuring, then i loose the ha-setup of my fc configuration. virsh attach-disk <domian-name> <npiv:physical port wwn/virtual port wwn/array port wwn/LUN number> <target> i've got - x machines with 2 fc hbas - 2 fc switches - 2 sans with each having again 2 fc-hbas - each machine is therefore connected to all sans completely failsafe - on the machine itself i use automaticly the logical controller id - without xen and npiv i don't care or see at all the failsafe installation of the array. now with this npiv configuration i have to assign one physical port on the machine and loose therefor the failsafe installation on the host i used before. and i have to specify even a physical array port which makes this configuration even less robust. am i wrong? or did i misunderstood something here? my first assumption was that with npiv i was able to give the xen guest shared access to the logical fc-hba or the 2 physical fc-hbas. but that is not the case in this example. is there a way to propagate the npiv ports to the xen guest? best regards, Uwe
_______________________________________________ xen-discuss mailing list [email protected]
