- use err/errx/warn, instead of PERROR, perror and fprintf - Match () place ment consistent in this files - Use consistent tabs and whitespacing.
Signed-off-by: Tony Breeds <[EMAIL PROTECTED]> --- tools/xentrace/xentrace.c | 137 ++++++++++++++--------------------------- tools/xentrace/xentrace_format | 51 +++++++-------- 2 files changed, 73 insertions(+), 115 deletions(-) Index: xenppc-unstable.hg.working/tools/xentrace/xentrace.c =================================================================== --- xenppc-unstable.hg.working.orig/tools/xentrace/xentrace.c +++ xenppc-unstable.hg.working/tools/xentrace/xentrace.c @@ -22,6 +22,7 @@ #include <signal.h> #include <inttypes.h> #include <string.h> +#include <err.h> #include <xen/xen.h> #include <xen/trace.h> @@ -42,16 +43,6 @@ #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -#define PERROR(_m, _a...) \ -do { \ - int __saved_errno = errno; \ - fprintf(stderr, "ERROR: " _m " (%d = %s)\n" , ## _a , \ - __saved_errno, strerror(__saved_errno)); \ - errno = __saved_errno; \ -} while (0) - -extern FILE *stderr; - /***** Compile time configuration of defaults ********************************/ /* when we've got more records than this waiting, we log it to the output */ @@ -88,7 +79,7 @@ void close_handler(int signal) struct timespec millis_to_timespec(unsigned long millis) { struct timespec spec; - + spec.tv_sec = millis / 1000; spec.tv_nsec = (millis % 1000) * 1000; @@ -128,10 +119,7 @@ void write_rec(uint32_t cpu, struct t_re } if ( written != 8 ) - { - PERROR("Failed to write trace record"); - exit(EXIT_FAILURE); - } + err(EXIT_FAILURE, "Failed to write trace record"); } static void get_tbufs(unsigned long *mfn, unsigned long *size) @@ -139,21 +127,16 @@ static void get_tbufs(unsigned long *mfn int xc_handle = xc_interface_open(); int ret; - if ( xc_handle < 0 ) - { - exit(EXIT_FAILURE); - } + if ( xc_handle < 0 ) + errx(EXIT_FAILURE, "Unable to open the xc interface"); - if(!opts.tbuf_size) - opts.tbuf_size = DEFAULT_TBUF_SIZE; + if ( !opts.tbuf_size ) + opts.tbuf_size = DEFAULT_TBUF_SIZE; ret = xc_tbuf_enable(xc_handle, opts.tbuf_size, mfn, size); if ( ret != 0 ) - { - perror("Couldn't enable trace buffers"); - exit(1); - } + err(EXIT_FAILURE, "Couldn't enable trace buffers"); xc_interface_close(xc_handle); } @@ -174,10 +157,8 @@ struct t_buf *map_tbufs(unsigned long tb xc_handle = xc_interface_open(); - if ( xc_handle < 0 ) - { - exit(EXIT_FAILURE); - } + if ( xc_handle < 0 ) + errx(EXIT_FAILURE, "Unable to open the xc interface"); /* On PPC (At least) the DOMID arg is ignored in dom0 */ tbufs_mapped = xc_map_foreign_range(xc_handle, DOMID_XEN, @@ -186,18 +167,15 @@ struct t_buf *map_tbufs(unsigned long tb xc_interface_close(xc_handle); - if ( tbufs_mapped == 0 ) - { - PERROR("Failed to mmap trace buffers"); - exit(EXIT_FAILURE); - } + if ( tbufs_mapped == 0 ) + err(EXIT_FAILURE, "Failed to mmap trace buffers"); return tbufs_mapped; } /** * set_mask - set the cpu/event mask in HV - * @mask: the new mask + * @mask: the new mask * @type: the new mask type,0-event mask, 1-cpu mask * */ @@ -206,21 +184,19 @@ void set_mask(uint32_t mask, int type) int ret = 0; int xc_handle = xc_interface_open(); /* for accessing control interface */ - if (type == 1) { + if ( type == 1 ) { ret = xc_tbuf_set_cpu_mask(xc_handle, mask); - fprintf(stderr, "change cpumask to 0x%x\n", mask); - } else if (type == 0) { + warnx("change cpumask to 0x%x\n", mask); + } else if ( type == 0 ) { ret = xc_tbuf_set_evt_mask(xc_handle, mask); - fprintf(stderr, "change evtmask to 0x%x\n", mask); + warnx("change evtmask to 0x%x\n", mask); } xc_interface_close(xc_handle); if ( ret != 0 ) - { - PERROR("Failure to get trace buffer pointer from Xen and set the new mask"); - exit(EXIT_FAILURE); - } + err(EXIT_FAILURE, "Failure to get trace buffer pointer from " + "Xen and set the new mask"); } /** @@ -240,11 +216,8 @@ struct t_buf **init_bufs_ptrs(void *bufs user_ptrs = (struct t_buf **)calloc(num, sizeof(struct t_buf *)); if ( user_ptrs == NULL ) - { - PERROR( "Failed to allocate memory for buffer pointers\n"); - exit(EXIT_FAILURE); - } - + err(EXIT_FAILURE, "Failed to allocate memory for buffer pointers"); + /* initialise pointers to the trace buffers - given the size of a trace * buffer and the value of bufs_maped, we can easily calculate these */ for ( i = 0; i<num; i++ ) @@ -269,13 +242,10 @@ struct t_rec **init_rec_ptrs(struct t_bu { int i; struct t_rec **data; - + data = calloc(num, sizeof(struct t_rec *)); if ( data == NULL ) - { - PERROR("Failed to allocate memory for data pointers\n"); - exit(EXIT_FAILURE); - } + err(EXIT_FAILURE, "Failed to allocate memory for data pointers"); for ( i = 0; i < num; i++ ) data[i] = (struct t_rec *)(meta[i] + 1); @@ -291,14 +261,11 @@ uint32_t get_num_cpus(void) xc_physinfo_t physinfo; int xc_handle = xc_interface_open(); int ret; - + ret = xc_physinfo(xc_handle, &physinfo); - + if ( ret != 0 ) - { - PERROR("Failure to get logical CPU count from Xen"); - exit(EXIT_FAILURE); - } + errx(EXIT_FAILURE, "Failure to get logical CPU count from Xen"); xc_interface_close(xc_handle); @@ -377,17 +344,17 @@ int parse_evtmask(char *arg, struct argp char *inval; /* search filtering class */ - if (strcmp(arg, "gen") == 0){ + if ( strcmp(arg, "gen") == 0 ) setup->evt_mask |= TRC_GEN; - } else if(strcmp(arg, "sched") == 0){ + else if ( strcmp(arg, "sched") == 0 ) setup->evt_mask |= TRC_SCHED; - } else if(strcmp(arg, "dom0op") == 0){ + else if ( strcmp(arg, "dom0op") == 0 ) setup->evt_mask |= TRC_DOM0OP; - } else if(strcmp(arg, "vmx") == 0){ + else if ( strcmp(arg, "vmx") == 0 ) setup->evt_mask |= TRC_VMX; - } else if(strcmp(arg, "all") == 0){ + else if ( strcmp(arg, "all") == 0 ) setup->evt_mask |= TRC_ALL; - } else { + else { setup->evt_mask = strtol(arg, &inval, 0); if ( inval == arg ) argp_usage(state); @@ -430,13 +397,13 @@ error_t cmd_parser(int key, char *arg, s argp_usage(state); } break; - + case 'e': /* set new event mask for filtering*/ { parse_evtmask(arg, state); } break; - + case 'S': /* set tbuf size (given in pages) */ { char *inval; @@ -454,7 +421,7 @@ error_t cmd_parser(int key, char *arg, s argp_usage(state); } break; - + default: return ARGP_ERR_UNKNOWN; } @@ -473,16 +440,16 @@ const struct argp_option cmd_opts[] = "(default " xstr(NEW_DATA_THRESH) ")." }, { .name = "poll-sleep", .key='s', .arg="p", - .doc = + .doc = "Set sleep time, p, in milliseconds between polling the trace buffer " "for new data (default " xstr(POLL_SLEEP_MILLIS) ")." }, { .name = "cpu-mask", .key='c', .arg="c", - .doc = + .doc = "set cpu-mask " }, { .name = "evt-mask", .key='e', .arg="e", - .doc = + .doc = "set evt-mask " }, { .name = "trace-buf-size", .key='S', .arg="N", @@ -504,7 +471,7 @@ const struct argp parser_def = "\v" "This tool is used to capture trace buffer data from Xen. The data is " "output in a binary format, in the following order:\n\n" - " CPU(uint) TSC(uint64_t) EVENT(uint32_t) D1 D2 D3 D4 D5 " + " CPU(uint32_t) TSC(uint64_t) EVENT(uint32_t) D1 D2 D3 D4 D5 " "(all uint32_t)\n\n" "The output should be parsed using the tool xentrace_format, which can " "produce human-readable output in ASCII format." @@ -513,8 +480,8 @@ const struct argp parser_def = const char *argp_program_version = "xentrace v1.1"; const char *argp_program_bug_address = "<[EMAIL PROTECTED]>"; - - + + int main(int argc, char **argv) { int outfd = 1, ret; @@ -529,31 +496,23 @@ int main(int argc, char **argv) argp_parse(&parser_def, argc, argv, 0, 0, &opts); - if (opts.evt_mask != 0) { + if ( opts.evt_mask != 0 ) set_mask(opts.evt_mask, 0); - } - if (opts.cpu_mask != 0) { + if ( opts.cpu_mask != 0 ) set_mask(opts.cpu_mask, 1); - } if ( opts.outfile ) outfd = open(opts.outfile, O_WRONLY | O_CREAT | O_LARGEFILE, 0644); - if(outfd < 0) - { - perror("Could not open output file"); - exit(EXIT_FAILURE); - } + if ( outfd < 0 ) + err(EXIT_FAILURE, "Could not open output file"); - if(isatty(outfd)) - { - fprintf(stderr, "Cannot output to a TTY, specify a log file.\n"); - exit(EXIT_FAILURE); - } + if ( isatty(outfd) ) + errx(EXIT_FAILURE, "Cannot output to a TTY, specify a log file.\n"); logfile = fdopen(outfd, "w"); - + /* ensure that if we get a signal, we'll do cleanup, then exit */ act.sa_handler = close_handler; act.sa_flags = 0; Index: xenppc-unstable.hg.working/tools/xentrace/xentrace_format =================================================================== --- xenppc-unstable.hg.working.orig/tools/xentrace/xentrace_format +++ xenppc-unstable.hg.working/tools/xentrace/xentrace_format @@ -24,7 +24,7 @@ def usage(): Which correspond to the CPU number, event ID, timestamp counter and the 5 data fields from the trace record. There should be one such rule for each type of event. - + Depending on your system and the volume of trace buffer data, this script may not be able to keep up with the output of xentrace if it is piped directly. In these circumstances you should have @@ -34,7 +34,7 @@ def usage(): def read_defs(defs_file): defs = {} - + fd = open(defs_file) reg = re.compile('(\S+)\s+(\S.*)') @@ -43,14 +43,14 @@ def read_defs(defs_file): line = fd.readline() if not line: break - - if line[0] == '#' or line[0] == '\n': - continue - + + if line[0] == '#' or line[0] == '\n': + continue + m = reg.match(line) if not m: print >> sys.stderr, "Bad format file" ; sys.exit(1) - + defs[str(eval(m.group(1)))] = m.group(2) return defs @@ -70,7 +70,7 @@ try: opts, arg = getopt.getopt(sys.argv[1:], "c:" ) for opt in opts: - if opt[0] == '-c' : mhz = int(opt[1]) + if opt[0] == '-c' : mhz = int(opt[1]) except getopt.GetoptError: usage() @@ -96,7 +96,7 @@ i=0 while not interrupted: try: - i=i+1 + i=i+1 line = sys.stdin.read(struct.calcsize(CPUREC)) if not line: break @@ -108,19 +108,20 @@ while not interrupted: (tsc, event, d1, d2, d3, d4, d5) = struct.unpack(TRCREC, line) - #tsc = (tscH<<32) | tscL + #tsc = (tscH<<32) | tscL - #print i, tsc + #print i, tsc if cpu >= len(last_tsc): last_tsc += [0] * (cpu - len(last_tsc) + 1) - elif tsc < last_tsc[cpu]: - print "TSC stepped backward cpu %d ! %d %d" % (cpu,tsc,last_tsc[cpu]) + elif tsc < last_tsc[cpu]: + print "TSC stepped backward cpu %d ! %d %d" % (cpu, tsc, + last_tsc[cpu]) - last_tsc[cpu] = tsc + last_tsc[cpu] = tsc - if mhz: - tsc = tsc / (mhz*1000000.0) + if mhz: + tsc = tsc / (mhz*1000000.0) args = {'cpu' : cpu, 'tsc' : tsc, @@ -131,15 +132,13 @@ while not interrupted: '4' : d4, '5' : d5 } - try: - - if defs.has_key(str(event)): - print defs[str(event)] % args - else: - if defs.has_key(str(0)): print defs[str(0)] % args - except TypeError: - print defs[str(event)] - print args - + try: + if defs.has_key(str(event)): + print defs[str(event)] % args + else: + if defs.has_key(str(0)): print defs[str(0)] % args + except TypeError: + print defs[str(event)] + print args except IOError, struct.error: sys.exit() _______________________________________________ Xen-ppc-devel mailing list Xen-ppc-devel@lists.xensource.com http://lists.xensource.com/xen-ppc-devel