# HG changeset patch
# User Jimi Xenidis <[EMAIL PROTECTED]>
# Node ID c759c733f77d5edaa21620f37206521399842023
# Parent 6a86727a3afe85751d916700c1c6db2c75e7bd27
[XEN][POWERPC] Update linker symbols and scripts
The following patch:
- updates linker symbols and interfaces that use them
- clean up of dynamically registered PAPR hcalls
- Way simpler linker script
Signed-off-by: Jimi Xenidis <[EMAIL PROTECTED]>
---
xen/arch/powerpc/Makefile | 2
xen/arch/powerpc/boot_of.c | 4
xen/arch/powerpc/hcalls.c | 6 -
xen/arch/powerpc/of-devtree.h | 3
xen/arch/powerpc/xen.lds.S | 206 ++++++++++-----------------------------
xen/include/asm-powerpc/config.h | 5
xen/include/asm-powerpc/init.h | 10 -
7 files changed, 72 insertions(+), 164 deletions(-)
diff -r 6a86727a3afe -r c759c733f77d xen/arch/powerpc/Makefile
--- a/xen/arch/powerpc/Makefile Wed Jan 17 13:18:02 2007 -0500
+++ b/xen/arch/powerpc/Makefile Wed Jan 17 14:12:08 2007 -0500
@@ -64,7 +64,7 @@ CFLAGS += $(PPC_C_WARNINGS)
# objects into a single ELF segment and to not link in any additional
# objects that gcc would normally like to
#
-OMAGIC = -N -nodefaultlibs -nostartfiles
+OMAGIC = -nodefaultlibs -nostartfiles
firmware: of_handler/built_in.o $(TARGET_SUBARCH)/memcpy.o of-devtree.o
$(CC) $(CFLAGS) $(OMAGIC) -e __ofh_start -Wl,-Ttext,0x0 $^ -o $@
diff -r 6a86727a3afe -r c759c733f77d xen/arch/powerpc/boot_of.c
--- a/xen/arch/powerpc/boot_of.c Wed Jan 17 13:18:02 2007 -0500
+++ b/xen/arch/powerpc/boot_of.c Wed Jan 17 14:12:08 2007 -0500
@@ -13,7 +13,7 @@
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
- * Copyright (C) IBM Corp. 2005, 2006
+ * Copyright IBM Corp. 2005, 2006, 2007
*
* Authors: Jimi Xenidis <[EMAIL PROTECTED]>
* Hollis Blanchard <[EMAIL PROTECTED]>
@@ -1303,7 +1303,7 @@ multiboot_info_t __init *boot_of_init(
__func__,
r3, r4, vec, r6, r7, orig_msr);
- if ((vec >= (ulong)_start) && (vec <= (ulong)_end)) {
+ if (is_kernel(vec)) {
of_panic("Hmm.. OF[0x%lx] seems to have stepped on our image "
"that ranges: %p .. %p.\n",
vec, _start, _end);
diff -r 6a86727a3afe -r c759c733f77d xen/arch/powerpc/hcalls.c
--- a/xen/arch/powerpc/hcalls.c Wed Jan 17 13:18:02 2007 -0500
+++ b/xen/arch/powerpc/hcalls.c Wed Jan 17 14:12:08 2007 -0500
@@ -13,7 +13,7 @@
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
- * Copyright (C) IBM Corp. 2005
+ * Copyright IBM Corp. 2005, 2006, 2007
*
* Authors: Hollis Blanchard <[EMAIL PROTECTED]>
*/
@@ -130,7 +130,7 @@ static void register_papr_hcall(ulong nu
static void init_papr_hcalls(void)
{
- inithcall_t *hcall;
+ init_hcall_t *hcall;
int i;
/* initialize PAPR hcall table */
@@ -140,7 +140,7 @@ static void init_papr_hcalls(void)
register_papr_hcall(i, do_ni_papr_hypercall);
/* register the PAPR hcalls */
- for (hcall = &__inithcall_start; hcall < &__inithcall_end; hcall++) {
+ for (hcall = &__init_hcall_start; hcall < &__init_hcall_end; hcall++) {
register_papr_hcall(hcall->number, hcall->handler);
}
}
diff -r 6a86727a3afe -r c759c733f77d xen/arch/powerpc/of-devtree.h
--- a/xen/arch/powerpc/of-devtree.h Wed Jan 17 13:18:02 2007 -0500
+++ b/xen/arch/powerpc/of-devtree.h Wed Jan 17 14:12:08 2007 -0500
@@ -13,7 +13,7 @@
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
- * Copyright (C) IBM Corp. 2005
+ * Copyright IBM Corp. 2005, 2006, 2007
*
* Authors: Jimi Xenidis <[EMAIL PROTECTED]>
*/
@@ -23,6 +23,7 @@
#include <xen/types.h>
#include <xen/string.h>
+#include <xen/kernel.h>
#include <public/xen.h>
enum {
diff -r 6a86727a3afe -r c759c733f77d xen/arch/powerpc/xen.lds.S
--- a/xen/arch/powerpc/xen.lds.S Wed Jan 17 13:18:02 2007 -0500
+++ b/xen/arch/powerpc/xen.lds.S Wed Jan 17 14:12:08 2007 -0500
@@ -7,202 +7,112 @@ OUTPUT_FORMAT("elf64-powerpc", "elf64-po
"elf64-powerpc")
OUTPUT_ARCH(powerpc:common64)
ENTRY(_start)
-SEARCH_DIR("=/usr/local/lib64"); SEARCH_DIR("=/lib64");
SEARCH_DIR("=/usr/lib64"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib");
SEARCH_DIR("=/usr/lib");
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
PHDRS
{
text PT_LOAD;
}
SECTIONS
{
+ /* This is the address that we are linking at */
. = 0x00400000;
PROVIDE(_text = .);
+ PROVIDE(_stext = .);
/* Read-only sections, merged into text segment: */
- .interp : { *(.interp) } :text
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.dyn :
- {
- *(.rel.init)
- *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
- *(.rel.fini)
- *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
- *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
- *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
- *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
- *(.rel.ctors)
- *(.rel.dtors)
- *(.rel.got)
- *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*)
- *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*)
- *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*)
- *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*)
- *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
- }
- .rela.dyn :
- {
- *(.rela.init)
- *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
- *(.rela.fini)
- *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
- *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
- *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
- *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
- *(.rela.ctors)
- *(.rela.dtors)
- *(.rela.got)
- *(.rela.toc)
- *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*)
- *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*)
- *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*)
- *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*)
- *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
- }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .rela.tocbss : { *(.rela.tocbss) }
- .init :
- {
- KEEP (*(.init))
- } =0x60000000
.text :
{
- *(.text .stub .text.* .gnu.linkonce.t.*)
+ *(.text)
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
- *(.sfpr .glink)
- } =0x60000000
- .fini :
- {
- KEEP (*(.fini))
- } =0x60000000
+ } : text
+ /* end of text */
PROVIDE (__etext = .);
PROVIDE (_etext = .);
PROVIDE (etext = .);
- .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
- .rodata1 : { *(.rodata1) }
- .sdata2 : { *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) }
- .sbss2 : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
- .eh_frame_hdr : { *(.eh_frame_hdr) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN (0x10000) - ((0x10000 - .) & (0x10000 - 1)); . =
DATA_SEGMENT_ALIGN (0x10000, 0x1000);
- /* Ensure the __preinit_array_start label is properly aligned. We
- could instead move the label definition inside the section, but
- the linker would then create the section even if it turns out to
- be empty, which isn't pretty. */
- . = ALIGN(64 / 8);
- PROVIDE (__preinit_array_start = .);
- .preinit_array : { *(.preinit_array) }
- PROVIDE (__preinit_array_end = .);
- PROVIDE (__init_array_start = .);
- .init_array : { *(.init_array) }
- PROVIDE (__init_array_end = .);
- PROVIDE (__fini_array_start = .);
- .fini_array : { *(.fini_array) }
- PROVIDE (__fini_array_end = .);
+
+ /* read only data */
+ .rodata : { *(.rodata .rodata.*) } : text
+ .rodata1 : { *(.rodata1) } : text
+ .sdata2 : { *(.sdata2 .sdata2.*) } : text
+ .sbss2 : { *(.sbss2 .sbss2.*) } : text
+
+ . = ALIGN(64);
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) } : text
+ __stop___ex_table = .;
+ . = ALIGN(64);
+
.data :
{
*(.data .gnu.linkonce.d.*)
SORT(CONSTRUCTORS)
- }
-
- . = ALIGN(32);
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
- __initcall_start = .;
- .initcall.init : { *(.initcall1.init) }
- __initcall_end = .;
- __inithcall_start = .;
- .inithcall.text : { *(.inithcall.text) }
- __inithcall_end = .;
-
- __per_cpu_start = .;
- .data.percpu : { *(.data.percpu) }
- __per_cpu_data_end = .;
- . = __per_cpu_start + (NR_CPUS << PERCPU_SHIFT);
- . = ALIGN(STACK_SIZE);
- __per_cpu_end = .;
-
- .data1 : { *(.data1) }
- .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
- .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
- .eh_frame : { KEEP (*(.eh_frame)) }
- .gcc_except_table : { *(.gcc_except_table) }
- .toc1 ALIGN(8) : { *(.toc1) }
- .opd ALIGN(8) : { KEEP (*(.opd)) }
- .dynamic : { *(.dynamic) }
- .ctors :
- {
- /* gcc uses crtbegin.o to find the start of
- the constructors, so we make sure it is
- first. Because this is a wildcard, it
- doesn't matter if the user does not
- actually link against crtbegin.o; the
- linker won't look for a file to match a
- wildcard. The wildcard also means that it
- doesn't matter which directory crtbegin.o
- is in. */
- KEEP (*crtbegin*.o(.ctors))
- /* We don't want to include the .ctor section from
- from the crtend.o file until after the sorted ctors.
- The .ctor section from the crtend file contains the
- end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
- KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- }
- .dtors :
- {
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
- KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- }
- .jcr : { KEEP (*(.jcr)) }
- .got ALIGN(8) : { *(.got .toc) }
+ } : text
+ .data1 : { *(.data1) } : text
+ .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) } : text
+ .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
: text
+ .toc1 ALIGN(8) : { *(.toc1) } : text
+ .opd ALIGN(8) : { KEEP (*(.opd)) } : text
+ .got ALIGN(8) : { *(.got .toc) } : text
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
.sdata :
{
*(.sdata .sdata.* .gnu.linkonce.s.*)
- }
+ } : text
_edata = .;
PROVIDE (edata = .);
+
+ . = ALIGN(4096); /* Init code and data */
+ __init_begin = .;
+ _sinittext = .;
+ .init.text : { *(.init.text) } : text
+ _einittext = .;
+ .init.data : { *(.init.data) } : text
+ . = ALIGN(32);
+ __setup_start = .;
+ .init.setup : { *(.init.setup) } : text
+ __setup_end = .;
+ __initcall_start = .;
+ .initcall.init : { *(.initcall1.init) } : text
+ __initcall_end = .;
+ __init_hcall_start = .;
+ .init_hcall.init : { *(.init_hcall.init) } : text
+ __init_hcall_end = .;
+ __builtin_cmdline : { *(__builtin_cmdline) } : text
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __per_cpu_start = .;
+ .data.percpu : { *(.data.percpu) } :text
+ __per_cpu_data_end = .;
+ . = __per_cpu_start + (NR_CPUS << PERCPU_SHIFT);
+ . = ALIGN(STACK_SIZE);
+ __per_cpu_end = .;
+
__bss_start = .;
- .tocbss ALIGN(8) : { *(.tocbss)}
+ .tocbss ALIGN(8) : { *(.tocbss) } : text
.sbss :
{
PROVIDE (__sbss_start = .);
PROVIDE (___sbss_start = .);
- *(.dynsbss)
*(.sbss .sbss.* .gnu.linkonce.sb.*)
*(.scommon)
PROVIDE (__sbss_end = .);
PROVIDE (___sbss_end = .);
- }
- .plt : { *(.plt) }
+ } : text
.bss :
{
- *(.dynbss)
*(.bss .bss.* .gnu.linkonce.b.*)
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
. = ALIGN(64 / 8);
- }
+ } : text
. = ALIGN(64 / 8);
_end = .;
PROVIDE (end = .);
- . = DATA_SEGMENT_END (.);
+
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
diff -r 6a86727a3afe -r c759c733f77d xen/include/asm-powerpc/config.h
--- a/xen/include/asm-powerpc/config.h Wed Jan 17 13:18:02 2007 -0500
+++ b/xen/include/asm-powerpc/config.h Wed Jan 17 14:12:08 2007 -0500
@@ -13,7 +13,7 @@
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
- * Copyright (C) IBM Corp. 2005
+ * Copyright IBM Corp. 2005, 2006, 2007
*
* Authors: Hollis Blanchard <[EMAIL PROTECTED]>
*/
@@ -34,9 +34,6 @@
#define U(x) (x ## U)
#define UL(x) (x ## UL)
-extern char _start[];
-extern char _end[];
-extern char _etext[];
extern char __bss_start[];
#endif
diff -r 6a86727a3afe -r c759c733f77d xen/include/asm-powerpc/init.h
--- a/xen/include/asm-powerpc/init.h Wed Jan 17 13:18:02 2007 -0500
+++ b/xen/include/asm-powerpc/init.h Wed Jan 17 14:12:08 2007 -0500
@@ -13,7 +13,7 @@
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
- * Copyright (C) IBM Corp. 2006
+ * Copyright IBM Corp. 2006, 2007
*
* Authors: Hollis Blanchard <[EMAIL PROTECTED]>
*/
@@ -27,14 +27,14 @@ typedef struct {
typedef struct {
unsigned long number;
hcall_handler_t handler;
-} inithcall_t;
-extern inithcall_t __inithcall_start, __inithcall_end;
+} init_hcall_t;
+extern init_hcall_t __init_hcall_start, __init_hcall_end;
#define __init_papr_hcall(nr, fn) \
- static inithcall_t __inithcall_##fn __init_hcall \
+ static init_hcall_t __init_hcall_##fn __init_hcall \
= { .number = nr, .handler = fn }
#define __init_hcall \
- __attribute_used__ __attribute__ ((__section__ (".inithcall.text")))
+ __attribute_used__ __attribute__ ((__section__ (".init_hcall.init")))
#endif /* _XEN_ASM_INIT_H */
_______________________________________________
Xen-ppc-devel mailing list
Xen-ppc-devel@lists.xensource.com
http://lists.xensource.com/xen-ppc-devel
