nplan (0.32~16.04.3) xenial; urgency=medium

  * tests/integration.py: Really fix skipping test_routes_v6 for the NM
    backend.

nplan (0.32~16.04.2) xenial; urgency=medium

  * tests/integration.py: Fix test_routes_v6 that I clobbered when I re-applied
    the skip rules for 16.04 after merging in 0.32.

nplan (0.32~16.04.1) xenial; urgency=medium

  * Backport netplan 0.32 to 16.04. (LP: #1713142)
  * debian/control: Depend on systemd (>= 229-4ubuntu20) for the PrimarySlave
    feature backported in that revision.
  * tests/integration.py: Skip tests that are still not yet supported in xenial

nplan (0.32) bionic; urgency=medium

  * src/nm.c: better handle the UUID generation; the order of iterating
    through interaces may affect things here. Also make sure the tests catch
    a null UUID.

nplan (0.31) bionic; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * src/nm.c: generate a UUID for a connection only as needed; when we're
    dealing with NM VLANs. (LP: #1712921)
  * debian/tests/autostart: Make the autostart test more verbose and avoid
    failing right from the start when systemd-networkd is disabled.
    (LP: #1699371)
  * tests/integration.py: bump the NetworkManager timeout for settling to
    120 seconds, autopkgtest infrastructure tends to be a little slow for the
    network device configuration to be applied and noticed by NM.
    (LP: #1699371)

  [ Dimitri John Ledkov ]
  * Reload udevd to invalidate configuration cache of .rules/.link files
    as generate step may have changed them. LP: #1669564

  [ Dan Streetman ]
  * Add another interface driver exception to netplan replug to prevent unbind
    of the Xen VIF interfaces. (LP: #1729573)

nplan (0.30) artful; urgency=medium

  * Add an "optional" syntax node for now to all devices. This is unimplemented
    for now, but intended to allow users to mark some devices as optional: to
    make sure they do not delay boot when configured. (LP: #1664844)

nplan (0.29) artful; urgency=medium

  * Fix autopkgtests in a world where /run/NetworkManager/conf.d already
    exists. nplan is enabled by default, so it might well have the directory
    already created on the filesystem.

nplan (0.28) artful; urgency=medium

  * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
    broke default network config in LXD and was contrary to the defaults used
    by the kernel. Reopens LP: 1655440. (LP: #1717404)
  * Add "accept-ra:" key for all device types; this will default to OFF but
    allow users to disable processing Router Advertisements when required by
    their network setup. (LP: #1655440)

nplan (0.27) artful; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * Fix crash in systemd generator if called by an user on the command-line
  * coverage: fix exclusions to properly not cover our "never reached defaults"

  [ Dimitri John Ledkov ]
  * tests/integration.py: In teardown, stop systemd-networkd.socket.
  * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
    (LP: #1717471)
  * tests/integration.py: fix resolved detection.

nplan (0.26) artful; urgency=medium

  * Bonding:
    - Add support for specifying a primary slave. (LP: #1709135)
  * Rebind:
    - Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
      rebind. (LP: #1712224)
  * Autopkgtests:
    - Add allow-stderr. Systemd now bleats about a the networkd socket still
      being around and enabled when we restart the service; but we don't need
      to care since we're /restarting/ the service to load the new config.
    - Fix the autostart package to be more sensible: we don't really care if
      networkd autostarts or not, but we need to make sure that our generator
      will run at boot, so instead check the state, but only assert it once
      we've added a config file and before checking the state of our dummy
      device.
    - Do a bit more to make sure "mix" tests which stack virtual devices are
      as reliable as possible; by setting saner defaults.

nplan (0.25) artful; urgency=medium

  * tests/generate.py: add a test to validate that correct blacklist entries
    are added when creating virtual devices.
  * tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
    the remaining interface and udev configuration can confuse NetworkManager
    now that it seems to manage random devices it did not create again.
    (LP: #1699371)
  * src/nm.c: set the MTU even though we also specify it in systemd-networkd
    for consumption by udev. NetworkManager will try to set it and might
    otherwise default to the wrong value.
  * src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
    same config, SLAAC), and don't have static addresses set. This should fix
    the cases where unconfigured devices still get an IPv6 address.
    (LP: #1655440)
  * src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is otherwise not
    configured; this follows the same logic as setting IPv6AcceptRA=no in
    networkd, with the exception that NM does not currently disable RAs. When
    it does, an unconfigured device for IPv6 will truly be left with no config.

nplan (0.24) artful; urgency=medium

  * debian/control: set Priority to important to make sure we can get into
    minimal.

Date: Mon, 04 Dec 2017 10:57:34 -0500
Changed-By: Mathieu Trudel-Lapierre <cypher...@ubuntu.com>
Maintainer: Ubuntu Developers <ubuntu-devel-disc...@lists.ubuntu.com>
https://launchpad.net/ubuntu/+source/nplan/0.32~16.04.3
Format: 1.8
Date: Mon, 04 Dec 2017 10:57:34 -0500
Source: nplan
Binary: nplan
Architecture: source
Version: 0.32~16.04.3
Distribution: xenial
Urgency: medium
Maintainer: Ubuntu Developers <ubuntu-devel-disc...@lists.ubuntu.com>
Changed-By: Mathieu Trudel-Lapierre <cypher...@ubuntu.com>
Description:
 nplan      - YAML network configuration abstraction for various backends
Launchpad-Bugs-Fixed: 1655440 1664844 1669564 1699371 1709135 1712224 1712921 
1713142 1717404 1717471 1729573
Changes:
 nplan (0.32~16.04.3) xenial; urgency=medium
 .
   * tests/integration.py: Really fix skipping test_routes_v6 for the NM
     backend.
 .
 nplan (0.32~16.04.2) xenial; urgency=medium
 .
   * tests/integration.py: Fix test_routes_v6 that I clobbered when I re-applied
     the skip rules for 16.04 after merging in 0.32.
 .
 nplan (0.32~16.04.1) xenial; urgency=medium
 .
   * Backport netplan 0.32 to 16.04. (LP: #1713142)
   * debian/control: Depend on systemd (>= 229-4ubuntu20) for the PrimarySlave
     feature backported in that revision.
   * tests/integration.py: Skip tests that are still not yet supported in xenial
 .
 nplan (0.32) bionic; urgency=medium
 .
   * src/nm.c: better handle the UUID generation; the order of iterating
     through interaces may affect things here. Also make sure the tests catch
     a null UUID.
 .
 nplan (0.31) bionic; urgency=medium
 .
   [ Mathieu Trudel-Lapierre ]
   * src/nm.c: generate a UUID for a connection only as needed; when we're
     dealing with NM VLANs. (LP: #1712921)
   * debian/tests/autostart: Make the autostart test more verbose and avoid
     failing right from the start when systemd-networkd is disabled.
     (LP: #1699371)
   * tests/integration.py: bump the NetworkManager timeout for settling to
     120 seconds, autopkgtest infrastructure tends to be a little slow for the
     network device configuration to be applied and noticed by NM.
     (LP: #1699371)
 .
   [ Dimitri John Ledkov ]
   * Reload udevd to invalidate configuration cache of .rules/.link files
     as generate step may have changed them. LP: #1669564
 .
   [ Dan Streetman ]
   * Add another interface driver exception to netplan replug to prevent unbind
     of the Xen VIF interfaces. (LP: #1729573)
 .
 nplan (0.30) artful; urgency=medium
 .
   * Add an "optional" syntax node for now to all devices. This is unimplemented
     for now, but intended to allow users to mark some devices as optional: to
     make sure they do not delay boot when configured. (LP: #1664844)
 .
 nplan (0.29) artful; urgency=medium
 .
   * Fix autopkgtests in a world where /run/NetworkManager/conf.d already
     exists. nplan is enabled by default, so it might well have the directory
     already created on the filesystem.
 .
 nplan (0.28) artful; urgency=medium
 .
   * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
     broke default network config in LXD and was contrary to the defaults used
     by the kernel. Reopens LP: 1655440. (LP: #1717404)
   * Add "accept-ra:" key for all device types; this will default to OFF but
     allow users to disable processing Router Advertisements when required by
     their network setup. (LP: #1655440)
 .
 nplan (0.27) artful; urgency=medium
 .
   [ Mathieu Trudel-Lapierre ]
   * Fix crash in systemd generator if called by an user on the command-line
   * coverage: fix exclusions to properly not cover our "never reached defaults"
 .
   [ Dimitri John Ledkov ]
   * tests/integration.py: In teardown, stop systemd-networkd.socket.
   * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
     (LP: #1717471)
   * tests/integration.py: fix resolved detection.
 .
 nplan (0.26) artful; urgency=medium
 .
   * Bonding:
     - Add support for specifying a primary slave. (LP: #1709135)
   * Rebind:
     - Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
       rebind. (LP: #1712224)
   * Autopkgtests:
     - Add allow-stderr. Systemd now bleats about a the networkd socket still
       being around and enabled when we restart the service; but we don't need
       to care since we're /restarting/ the service to load the new config.
     - Fix the autostart package to be more sensible: we don't really care if
       networkd autostarts or not, but we need to make sure that our generator
       will run at boot, so instead check the state, but only assert it once
       we've added a config file and before checking the state of our dummy
       device.
     - Do a bit more to make sure "mix" tests which stack virtual devices are
       as reliable as possible; by setting saner defaults.
 .
 nplan (0.25) artful; urgency=medium
 .
   * tests/generate.py: add a test to validate that correct blacklist entries
     are added when creating virtual devices.
   * tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
     the remaining interface and udev configuration can confuse NetworkManager
     now that it seems to manage random devices it did not create again.
     (LP: #1699371)
   * src/nm.c: set the MTU even though we also specify it in systemd-networkd
     for consumption by udev. NetworkManager will try to set it and might
     otherwise default to the wrong value.
   * src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
     same config, SLAAC), and don't have static addresses set. This should fix
     the cases where unconfigured devices still get an IPv6 address.
     (LP: #1655440)
   * src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is otherwise not
     configured; this follows the same logic as setting IPv6AcceptRA=no in
     networkd, with the exception that NM does not currently disable RAs. When
     it does, an unconfigured device for IPv6 will truly be left with no config.
 .
 nplan (0.24) artful; urgency=medium
 .
   * debian/control: set Priority to important to make sure we can get into
     minimal.
Checksums-Sha1:
 5e26c49aa1d81765a5d58c7c255450e2000d9bca 1755 nplan_0.32~16.04.3.dsc
 3477973a6d02cac07ed7e6f39fd31d73d3f18709 73130 nplan_0.32~16.04.3.tar.gz
 1ef95b1ef47df41bbab8e034eef5c08cf2af255f 7978 
nplan_0.32~16.04.3_source.buildinfo
Checksums-Sha256:
 db7114a07da8ebec4a1d927d94b5e6a8d5a16fb04eeb99948de8b27315086952 1755 
nplan_0.32~16.04.3.dsc
 608b9f61d290f3d375976deb62f2b55dbd70e7c5642aa07b9eb5c01f294dd42e 73130 
nplan_0.32~16.04.3.tar.gz
 3dcde4ed8e08b84cf5b5073e8d51c00391b1ccb516ceeee4b13347602827d4a2 7978 
nplan_0.32~16.04.3_source.buildinfo
Files:
 36ea3adc2f867c9f020da21aa1128fd3 1755 net important nplan_0.32~16.04.3.dsc
 f5d0a02294726e2be6f03ab62a88b542 73130 net important nplan_0.32~16.04.3.tar.gz
 5c44177db4bac037f0152844a8ef29ea 7978 net important 
nplan_0.32~16.04.3_source.buildinfo
-- 
Xenial-changes mailing list
Xenial-changes@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/xenial-changes

Reply via email to