Hi
I am at revision 464 of the xenomai trunk and wanted to build UVM for vxworks.
The following libraries built fine:
libuvm.a
libpsos.a
libuitron.a
libvrtx.a
libnucleus.a
but the library I am most intrested in is missing?
Does anybody has any clue?
The XENO-parts of my .config are:
CONFIG_XENOMAI=y
CONFIG_XENO_OPT_NUCLEUS=y
CONFIG_XENO_OPT_PERVASIVE=y
CONFIG_XENO_OPT_PIPE=y
CONFIG_XENO_OPT_PIPE_NRDEV=32
CONFIG_XENO_OPT_SYS_HEAPSZ=128
# CONFIG_XENO_OPT_ISHIELD is not set
CONFIG_XENO_OPT_STATS=y
# CONFIG_XENO_OPT_DEBUG is not set
CONFIG_XENO_OPT_WATCHDOG=y
# CONFIG_XENO_OPT_SCALABLE_SCHED is not set
# CONFIG_XENO_HW_FPU is not set
CONFIG_XENO_HW_PERIODIC_TIMER=y
CONFIG_XENO_HW_TIMER_LATENCY=0
CONFIG_XENO_HW_SCHED_LATENCY=0
CONFIG_XENO_SKIN_NATIVE=y
CONFIG_XENO_OPT_NATIVE_REGISTRY=y
CONFIG_XENO_OPT_NATIVE_REGISTRY_NRSLOTS=512
CONFIG_XENO_OPT_NATIVE_PIPE=y
CONFIG_XENO_OPT_NATIVE_PIPE_BUFSZ=4096
CONFIG_XENO_OPT_NATIVE_SEM=y
CONFIG_XENO_OPT_NATIVE_EVENT=y
CONFIG_XENO_OPT_NATIVE_MUTEX=y
CONFIG_XENO_OPT_NATIVE_COND=y
CONFIG_XENO_OPT_NATIVE_QUEUE=y
CONFIG_XENO_OPT_NATIVE_HEAP=y
CONFIG_XENO_OPT_NATIVE_ALARM=y
CONFIG_XENO_OPT_NATIVE_MPS=y
CONFIG_XENO_OPT_NATIVE_INTR=y
# CONFIG_XENO_SKIN_POSIX is not set
# CONFIG_XENO_SKIN_PSOS is not set
# CONFIG_XENO_SKIN_UITRON is not set
# CONFIG_XENO_SKIN_VRTX is not set
# CONFIG_XENO_SKIN_VXWORKS is not set
# CONFIG_XENO_SKIN_RTAI is not set
CONFIG_XENO_SKIN_RTDM=y
CONFIG_XENO_SKIN_UVM=y
# CONFIG_XENO_DRIVERS_16550A is not set
# CONFIG_XENO_DRIVERS_TIMERBENCH is not set
The I configured xenomai like this
/mnt/data.ng/hcu/kernel/xenomai/configure --prefix=/usr --enable-uvm
--build=powerpc --host=powerpc-405-linux-gnu CFLAGS=-g
PATH=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/mnt/data.ng/hcu/tools/gcc-3.4.4-glibc-2.3.5/powerpc-405-linux-gnu/bin
and let it build with
DESTDIR=/mnt/data.ng/hcu/rootfs -k install
PATH=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/mnt/data.ng/hcu/tools/gcc-3.4.4-glibc-2.3.5/powerpc-405-linux-gnu/bin
install
Best regards
--
Niklaus Giger
