Wolfgang Grandegger wrote: > Benjamin ZORES wrote: >> Philippe Gerum wrote: >>> Yes. I have tested 2.6.22-DENX over two Freescale boards, namely >>> mpc52xx >>> and mpc8548, using this very same setup. Btw, you will need to pick >>> 2.0-01 which landed today in the repo, since I fixed a couple of issues >>> (one being serious) there. >>> >> Thanks for the info about 2.0 issue. >>>> And is the DENX patch specific to DENX tree or can it be applied/used >>>> from vanilla kernel tree ? >>>> >>>> >>> It should apply to the vanilla tree without too much fuss, but the >>> reference tree for the I-pipe/powerpc work is the DENX one, AFAIC. >>> >>> >> >> FYI, Adeos 2.0 / Xenomai 2.4 works fine on my PowerPC boards too. >> BTW, 2.6.23-rc5 patch does not apply "as it" on -rc7 and -rc8 >> (for ppc64 part at least). > > Because head_4xx.S has been renamed to head_40x.S in > arch/powerpc/kernel recently :-(. > > Wolfgang. > No, it was due to changes in code in time.c and process.c iirc.
Ben _______________________________________________ Xenomai-core mailing list Xenomai-core@gna.org https://mail.gna.org/listinfo/xenomai-core