Syed Amer Gilani wrote:
I wanted to test rtcan but the mscan Driver fails to compile:
CC drivers/xenomai/can/mscan/rtcan_mscan.o
drivers/xenomai/can/mscan/rtcan_mscan.c:85: error: syntax error before
string constant
drivers/xenomai/can/mscan/rtcan_mscan.c:85: warning: type defaults to
'int' in declaration of 'MODULE_PARM'
drivers/xenomai/can/mscan/rtcan_mscan.c:85: warning: function
declaration isn't a prototype
drivers/xenomai/can/mscan/rtcan_mscan.c:85: warning: data definition
has no type or storage class
drivers/xenomai/can/mscan/rtcan_mscan.c:89: error: syntax error before
string constant
drivers/xenomai/can/mscan/rtcan_mscan.c:89: warning: type defaults to
'int' in declaration of 'MODULE_PARM'
drivers/xenomai/can/mscan/rtcan_mscan.c:89: warning: function
declaration isn't a prototype
drivers/xenomai/can/mscan/rtcan_mscan.c:89: warning: data definition
has no type or storage class
make[4]: *** [drivers/xenomai/can/mscan/rtcan_mscan.o] Fehler 1
When i understand the Sources correct it has something to do with the
value of the config variables. But i left them all on the default
values:
CONFIG_XENO_DRIVERS_RTCAN_MSCAN=y
CONFIG_XENO_DRIVERS_RTCAN_MSCAN_1=y
CONFIG_XENO_DRIVERS_RTCAN_MSCAN_2=y
CONFIG_XENO_DRIVERS_RTCAN_MSCAN_CLOCK=66000000
CONFIG_XENO_DRIVERS_RTCAN_MSCAN_ALT=y
# CONFIG_XENO_DRIVERS_RTCAN_MSCAN_PSC2 is not set
Yes, I know since yesterday and it proofs again, untested software does
not work :-(. I'm working on a fix. Should be available today or tomorrow.
Wolfgang.
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
