Hi,
new machine, new chances. rtnet running only the peak_dongle to get into
action. But this is giving some problems.
First the BIOS setup. Must set LPT1 to EPP mode but I only have the
following options:
1-EPP+ECP
2-Bi-Directional
3-One directional
Only 2 allows me to load the driver without getting the message that the
device does not exist. So Bi-Directional = EPP?
There is one other setting in the BIOS (that I have found) which may
affect this which is the address and IRQ and DMA line.
The options are a whole lot of things but I have chosen
0x378 and IRQ 7. No DMA line
I mention this because I can select the same address with DMA 1 or DMA 2
but I have chosen the one with no direct memory access.
Once the driver is loaded, there is no adverse message in the system log
that I can see. dmesg report rtcan2 loaded.
I get flooding of the read buffer when I run my application. I can see
this in dmesg.
Is there something obviously wrong with my BIOS choice? If not what can
I check.
I have done some other tests but to prevent this email becoming too
long, especially if the problem is obviously BIOS related i refrain from
mentioning the outcome.
Kind regards,
Roland
_______________________________________________
Xenomai-help mailing list
Xenomai-help@gna.org
https://mail.gna.org/listinfo/xenomai-help
