No, I get the same error as before. Am I using the right patch? I have an HP laptop with an AMD chipset in it, should I be using i386 or x86. I've tried both now with the same problem as before. I start the script, then after 2 seconds it returns me to the terminal. I am now using xenomai-2.4.5 and linux-2.6.26.3 with no luck. Is there a log file generated from the prepare-kernel.sh script I can look at?
On 9/3/08 11:33 PM, "Gilles Chanteperdrix" <[EMAIL PROTECTED]> wrote: > Sam Ferguson wrote: >> Ok, so I updated my kernel and tried again, the script doesn't error out but >> it also doesn't say that it finished. Here's what happens: >> [EMAIL PROTECTED]:/usr/src/xenomai-2.4.4$ sudo scripts/prepare-kernel.sh >> Linux tree [default /lib/modules/2.6.24-19-generic/source]: >> /usr/src/linux-2.6.26.3 >> Target architecture [default i686]: >> Adeos patch [default >> /usr/src/xenomai-2.4.4/ksrc/arch/x86/patches/adeos-ipipe-2.6.26-x86-2.0-09.p >> atch]: > > There was two suggestions in my post: > - please use the proper patch for the kernel version you are using, > which you have followed; > - please use the latest revision in the 2.4.x branch, that is xenomai > 2.4.5, which you have not followed; > > But the important question is: does it compile now ? _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
