Marco Antônio Possamai wrote: > Greetings, everyone! > > > I'm having trouble concerning loading images to the Icecube (MPC5200 > Lite) board. > > The kernel version I'm using is the 2.6.25, and the U-boot version is 1.1.4. > > My directory containing the many files generated by the 'make > ARCH=powerpc zImage' command presents the following: > > 44x.h cuboot-8xx.o cuImage.lite5200b.elf > ep88xc.c inftrees.o mv64x60.o ps3-head.S > treeboot-bamboo.o > 4xx.c &nb sp; cuboot-bamboo.c cuImage.lite5200b.gz > ep88xc.o infutil.h ns16550.c ps3-hvcall.o > treeboot-ebony.c > 4xx.h cuboot-bamboo.o cuImage.lite5200.elf > fixed-head.o install.sh ns16550.o ps3-hvcall.S > treeboot-ebony.o > 4xx.o cuboot.c cuImage.lite5200.gz > fixed-head.S io.h of.c ps3.o > treeboot-walnut.c > addnote cuboot-ebony.c dcr.h > flatdevtree_env.h libfdt ofconsole.c README > treeboot-walnut.o > addnote.c cuboot-ebony.o devtree.c > fsl-soc.c libfdt_env.h ofconsole.o redboot-8xx.c > types.h > addRamDisk.c cuboot.h devtree.o > fsl-soc.h libfdt-wrapper.c of.h redboot-8xx.o > uartlite.c > bamboo.c cuboot-katmai.c div64.o > fsl-soc.o libfdt-wrapper.o oflib.c redboot.h > uartlite.o > bamboo.o cuboot-katmai.o div64.S > gunzip_util.c main.c oflib.o reg.h uImage > cpm-serial.c cuboot-mpc7448hpc2.c dtc > gunzip_util.h main.o of.o rs6000.h util.o > cpm-serial.o cuboot-mpc7448hpc2.o dtc-src > gunzip_util.o Makefile ops.h serial.c util.S > crt0.o cuboot.o dts > hack-coff mktree page.h serial.o > wrapper > crt0.S cuboot-pq2.c dummy.c > hack-coff.c mktree.c planetcore.c simple_alloc.c > wrapper.a > cuboot-52xx.c cuboot-pq2.o ebony.c > holly.c mpc52xx-psc.c planetcore.h simple_alloc.o > zconf.h > cuboot-52xx.o cuboot-rainier.c ebony.o > holly.o mpc52xx-psc.o planetcore.o stdio.c zImage > cuboot-824x.c cuboot-rainier.o elf.h > inffast.c mpc8xx.c ppc_asm.h stdio.h > zImage.chrp > cuboot-824x.o cuboot-sequoia.c elf_util.c > inffast.h mpc8xx.h ppcboot.h stdio.o > zImage.coff.lds > cuboot-83xx.c cuboot-sequoia.o elf_util.o > inffast.o mpc8xx.o pq2.c stdlib.c > zImage.coff.lds.S > cuboot-83xx.o cuboot-taishan.c empty.c > inffixed.h mpsc.c pq2.h stdlib.h > zImage.lds > cuboot-85xx.c cuboot-taishan.o empty.o > inflate.c mpsc.o pq2.o stdlib.o > zImage.lds.S > cuboot-85xx-cpm2.c cuboot-warp.c ep405.c > inflate.h mv64x60.c prpmc2800.c string.h > zImage.ps3.lds > cuboot-85xx-cpm2.o cuboot-warp.o ep405.o > inflate.o mv64x60.h prpmc2800.o string.o > zImage.ps3.lds.S > cuboot-85xx.o cuImage.lite5200 ep8248e.c > inftrees.c mv64x60_i2c.c ps3.c string.S zlib.h > cuboot-8xx.c cuImage.lite5200b ep8248e.o > inftrees.h mv64x60_i2c.o ps3-head.o treeboot-bamboo.c > zutil.h > > Notice the cuImage.lite5200 and the cuImage.lite5200b. Those are the > ones I've read that should successfully load to the board. > > Well, they do load, but the problem occurs when uncompressing the image > (I use GtkTerm by the way). The console shows OK to it and then freezes. > I've managed to uncompress images from previous versions successfully, > not diverging any step, nor having any sort of trouble. > > I'm sending a picture of it, it seems readable. > > Like I said, it freezes right after uncompressing the image. > > > I've also tried loading the zImage and the uImage files, but those > return some 'Bad Magic Word' error, is this some kind of joke? Hehehe.
Does your plain kernel without I-pipe and Xenomai support boot? If not, your question is off-topic here. Please consult on the Linuxppc-dev mailing list. Wolfgang. _______________________________________________ Xenomai-help mailing list Xenomai-help@gna.org https://mail.gna.org/listinfo/xenomai-help
