As far as I can tell, no kernel messages what so ever.
On 3/20/12 10:50 AM, "Gilles Chanteperdrix" <gilles.chanteperd...@xenomai.org> wrote: > On 03/20/2012 02:28 PM, Glen Wernersbach wrote: >> Hi All, >> >> I install Xenomai 2.6.0 on AT91SAM9G20 system and have found that when >> CONFIG_XENO_OPT_PERVASIVE is enabled my standard non real time linux serial >> write then read serial program does not work. >> >> If I turn off CONFIG_XENO_OPT_PERVASIVE, my serial program does work. > > Do you get a message on the kernel console about characters lost on > serial device? These seems to be more frequent when the interrupt > pipeline delays the interrupt than without the interrupt pipeline, but > always exists. -- Glen Wernersbach President & CTO Jetsoft Development Co. 629 Old St Rt. 74 Suite 210 Cincinnati, Oh 45244 Custom Programming Web Site: www.jetsoftdev.com Retail Products Web Site: www.scanhelp.com Phone: 513-528-6660 Fax: 513-528-3470 Cell 513-240-9929 ---- Partner for Software Technology Jacobs Automation 2365 Progress Drive Hebron, KY 41048 (513) 297-7550 ---- "Support Dyslexia Research" _______________________________________________ Xenomai-help mailing list Xenomai-help@gna.org https://mail.gna.org/listinfo/xenomai-help