On 03/29/2012 05:26 PM, Minh GIANG wrote: > i want to revive the topic over the problem RTSER_RTIOC_WAIT_EVENT > while compiling cross-link.c program. I cann't resolve my problem > after doing some solution given by the others > > Loading module: > > insmod ./xeno_16550A.ko io=0x3f8,0x2f8 irq=4,3 tx_fifo=10,20
Hm, is a FIFO size of 20 supported by the hardware? For a first try I would drop "tx_fifo=10,20" (using the default of 16 for both uarts). > start_index=0 (i have two serial ports on my pc) > > running crosslink test: > > main : write-file opened > main : write-config written > main : read-file opened > main : read-config written > main : write-task created > main : read-task created > main : starting write-task > main : starting read-task > Nr | write->irq | irq->read | write->read | > ----------------------------------------------------------- > read_task: error on RTSER_RTIOC_WAIT_EVENT, Connection timed out > read_task: error on RTSER_RTIOC_WAIT_EVENT, Connection timed out > > ... > > > > running test: > > cat /proc/xenomai/irq > > IRQ CPU0 > 3: 1089 rtser1 > 4: 5155 rtser0 You get interrupts, at least, but not the same amount, strange. What cross-link command options do you use? Wolfgang. _______________________________________________ Xenomai-help mailing list Xenomai-help@gna.org https://mail.gna.org/listinfo/xenomai-help
