On 06/10/2012 08:44 PM, Marc Le Douarain wrote:
> Le 04/06/2012 21:28, Gilles Chanteperdrix a écrit :
>> On 06/04/2012 09:26 PM, Marc Le Douarain wrote:
>>> Hello,
>>>
>>> I've some difficulties to run Xenomai with a little 'hello' example
>>> (that create/start a task)
>>> on a target 486 processor (without fpu).
>>>
>>> I successfully compiled the Linux kernel 2.6.38.8 with
>>> adeos-ipipe-2.6.38.8-x86-2.11-02.patch (Xenomai version is 2.5.6)
>>> (modify file xenomai-2.5.6/include/asm-x86/calibration.h
>>> "current_cpu_data"->"cpu_info" were required)
>>>
>>> dmesg extract:
>>> [ 0.000000] I-pipe 2.11-02: pipeline enabled.
>>> ...
>>> [ 0.140008] CPU: Cyrix Cx486SLC
>>> ...
>>> [ 1.440804] Xenomai: hal/i386 started.
>>> [ 1.448804] Xenomai: scheduling class idle registered.
>>> [ 1.452804] Xenomai: scheduling class rt registered.
>>> [ 1.488806] Xenomai: real-time nucleus v2.5.6 (Wormhole Wizards) loaded.
>>> [ 1.496807] Xenomai: starting native API services.
>>> [ 1.500807] Xenomai: starting POSIX services.
>>> [ 1.504807] Xenomai: starting RTDM services.
>> It may be due to the omit-frame-pointer option, please try adding
>> -fno-omit-frame-pointer to the CFLAGS
> Thanks for the tip,
> now it seems to work correctly !
> I've used the following command line to configure Xenomai user-part :
> "./configure CFLAGS="-march=i486 -fno-omit-frame-pointer"
> LDFLAGS="-march=i486" --disable-x86-sep --disable-x86-tsc"
>
> I've savagely modified latency.c, to avoid libm and double variables in
> the code,
As far as I can tell, the only reason we use libm is for sqrt. So, you
can use libm for floating points, and replace sqrt with a simple
newton-method base implementation.
--
Gilles.
_______________________________________________
Xenomai mailing list
[email protected]
http://www.xenomai.org/mailman/listinfo/xenomai
