On 03/23/2013 05:06 PM, [email protected] wrote:
>>> Is there a new ADEOS patch for ARM in the works ? I am interested to know
>>> what kernel version is targeted if that decision has been made.
>
>> 3.8. It currently works on at91s, but not yet on omap. We will probably
>> need to run tests on the imxs, as a lot of things have changed between
>> 3.5 and 3.8.
>
> Hi Gilles,
Hi,
your mail agent is not correctly configured, it sent the mail with an
empty suject, and without the "In-Reply-To, or References" headers set.
Please fix this. Your lines are also too long.
>
> Is there a public git tree with this work-in-progress? I couldn't pinpoint a
> specific one on git.xenomai.org or git.denx.de that was ARM/3.8 based
It is ipipe-gch.git, but the work in progress is not currently pushed
there, because I need to be able to rebase.
>
> The Xilinx -next tree for Zynq looks like it's based on 3.8, so a 3.8 ipipe
> would
> likely be much easier for me than attempting to back port all of the
> important patches.
>
> On a related note, is there something I can do to help prevent the Zynq ipipe
> port from
> bit-rotting? Even in 3.8, mainline is still missing a lot of the necessary
> code for Zynq,
> so I assume I'd need a pre- and post- patch. Could you elaborate on what
> these would entail?
The pre- and post- patches allow a SOC-specific port on a vendor branch
to only contain SOC-specific changes, and not the core of the I-pipe
changes, allowing to update the I-pipe patch without updating the
SOC-specifc port. The pre and post patches are artificial, generated
with differences between specific trees, they do not need to reflect the
way you maintaint the SOC-specific I-pipe for the vendor branch.
Regards.
--
Gilles.
_______________________________________________
Xenomai mailing list
[email protected]
http://www.xenomai.org/mailman/listinfo/xenomai
