Problem is resolved, issue with the hardware.

Thanks for your valuable time and support.

Regards,
Srikanth
On Apr 27, 2013 12:19 AM, "Srikanth C" <[email protected]> wrote:

>
> CONFIG_PCI_MSI is disabled in kernel, still spurious interrupts are raised.
>
> I tried with 3.1.10 kernel with adeos 3.1.10 patch with the same config
> file but  no spurious interrupts are raised.
>
> adeos patches are working fine, problem only with ipipe series.
>
> why ppc_md.get_irq is reading FF when interrupt is raised (this is
> happening after patching the xenomai, without xenomai patch same kernel
> with same configuration is working fine).
>
>
> On Fri, Apr 26, 2013 at 8:16 PM, Philippe Gerum <[email protected]> wrote:
>
>> On 04/25/2013 11:06 AM, Philippe Gerum wrote:
>>
>>> On 04/25/2013 11:03 AM, Philippe Gerum wrote:
>>>
>>>> On 04/25/2013 09:57 AM, Srikanth C wrote:
>>>>
>>>>> Test Results with adeos-ipipe patch:
>>>>>
>>>>> H/W Setup is same, S/W Changed to adeos-ipipe with 3.0.8 kernel.
>>>>>
>>>>> adeos-ipipe-3.0.8-powerpc-2.**13-04.patch applied to 3.0.8 kernel,
>>>>> spurious interrupt is not raised with this patch.
>>>>>
>>>>>
>>>> I still don't know what ppc platform you are running on, which does not
>>>> allow me to figure out which interrupt controller might be involved, and
>>>> how to try reproducing this issue.
>>>>
>>>> Again and I won't ask for this once more:
>>>>
>>>> - what is your ppc platform: 40x, 44x, 52xx, 82xx, 83xx, 85xx, 86xx,
>>>> anything else?
>>>>
>>>
>>> I need the cpu type _and_ the board type. Attaching your kernel .config
>>> would provide the required information.
>>>
>>
>> CONFIG_PCI_MSI as found in your configuration won't work, with any past
>> or current pipeline release for powerpc (3.0.8 was certainly a fluke, or
>> MSI was disabled there). The IRQ chip handlers are still attempting to mask
>> the MSI source upon interrupt, which won't fly in the I-pipe case.
>>
>> --
>> Philippe.
>>
>
>
_______________________________________________
Xenomai mailing list
[email protected]
http://www.xenomai.org/mailman/listinfo/xenomai

Reply via email to