Hi Matt, I can't locate "ipipe-core-3.8-arm-3.patch" mentioned in your instructions for 3.8 kernel. Did you mean " ipipe-core-3.8-arm-1.patch", in http://download.gna.org/adeos/patches/v3.x/arm/ ?
Br, Kari -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Kari Kumpulainen Sent: 22. heinäkuuta 2013 21:21 To: [email protected] Subject: Re: [Xenomai] Xenomai for Zynq Great, thank you so much! Br, Kari -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Matthew Fornero Sent: 22. heinäkuuta 2013 20:10 To: [email protected] Subject: Re: [Xenomai] Xenomai for Zynq On Mon, Jul 22, 2013 at 11:26 AM, Kari Kumpulainen <[email protected]> wrote: > Hello, > > Which kernel and Xenomai versions should I use if I want to build > Xenomai support for a Zynq (Xilinx) chip? > I tried to patch the 3.5 kernel provided by Xilinx, but patching > failed because of conflicts in some files. There are a couple projects on github which should get you started. Note that I haven't updated either of these for a while: 3.5 based kernel: https://github.com/mfornero/ipipe This is a merge of the Xilinx 3.5 tree and the ipipe 3.5 tree. Both are now fairly out of date 3.8 based kernel: use the patches and readme found here: https://github.com/mfornero/xenomai/tree/for-upstream/ksrc/arch/arm/patches I believe the later will be merged into the Xenomai tree at some point. Best Regards, Matt Fornero _______________________________________________ Xenomai mailing list [email protected] http://www.xenomai.org/mailman/listinfo/xenomai _______________________________________________ Xenomai mailing list [email protected] http://www.xenomai.org/mailman/listinfo/xenomai _______________________________________________ Xenomai mailing list [email protected] http://www.xenomai.org/mailman/listinfo/xenomai
