On 05/23/2014 11:43 PM, Manu S Madhav wrote:
> Hello all,
>
> I am running Ubuntu Precise (12.04) with kernel version 3.4.6 and
> xenomai-2.6.2.1. I have a NI PCIe 6259 which I am trying to configure for
> Digital I/O. Currently, the code itself is non-RT, I am trying first to
> figure out how to do I/O as well as obtain counter / quadrature information
> from my DAQ card.
>
> Using Analogy, and with a bit of reading, I was able to get analog input
> and output up and running without too much trouble, but digital I/O is
> completely evading me. I am just trying to turn on all digital outputs to 1
> using synchronous instruction to the DIO subdevice (#2, in my case). Size
> of the subdevice is 4 (32 bits).
>
> None of the following attempts worked. From the mailing list archives, I
> found a suggestion to compile xenomai libs with --fno-omit-frame-pointer,
> and that also didn't help. Any suggestions would be appreciated.
I will let others answer this mail, but:
- the bug with omit-frame-pointer was fixed, I believe, in xenomai
2.6.0, or 2.6.1
- 2.6.2.1 is not the latest version, so, please try 2.6.3 before
reporting an issue that may have been fixed since then.
--
Gilles.
_______________________________________________
Xenomai mailing list
[email protected]
http://www.xenomai.org/mailman/listinfo/xenomai
