On Sep 30, 2014 7:30 PM, "Gilles Chanteperdrix" <
[email protected]> wrote:
>
> On 09/30/2014 07:31 AM, GP Orcullo wrote:
> > Hi,
> >
> > Running the switchtest for extended periods (>10 mins) causes the
> > machine to lockup.
> >
> > I'm running a modified xeno-regression-test which contains only the
> > following tests:
> >
> > check_alive /usr/lib/xenomai/testsuite/switchtest
> > check_alive /usr/lib/xenomai/testsuite/switchtest -s 1000
> > check_alive /usr/lib/xenomai/testsuite/latency ${1+"$@"}
> >
> > The script is invoked with the following arguments:
> >
> > nohup sudo ./xeno-regression-test -l
> > "/usr/lib/xenomai/testsuite/dohell -m /media/work 36000" -t 2 >
> > /dev/null & top -d0.5
> >
> > The kernel dumps the OOPS information intermittently so it's difficult
> > to diagnose the issue.
> >
> > Attached is the kernel config and the logfile.
>
> Ok, this is an exynos. Sorry, but I have never seen the patch for
> exynos, so I do not know what is inside. You should direct your
> questions to whoever provided you with this support.
I'm in the process of porting xenomai to run on exynos.
The ipipe-core-3.8.13-arm-3.patch applies cleanly to the 3.8.13.11 kernel
used by the odroid U3 board.
Attached is the ipipe patch that I've made.
I was just wondering what would cause switchtest to fail. The error that I
can see is that the system is running out of memory and I don't know
exactly what is causing this.
I've reattached the dmesg log.
>
> --
> Gilles.
-------------- next part --------------
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0xa00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.8.13.11-xen (root@mba) (gcc version 4.7.2
(Debian 4.7.2-5) ) #10 SMP PREEMPT Tue Sep 30 03:45:05 UTC 2014
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine: ODROIDU2
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] cma: CMA: reserved 64 MiB at 43000000
[ 0.000000] cma: CMA: reserved 64 MiB at 51000000
[ 0.000000] cma: CMA: reserved 128 MiB at 67800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU EXYNOS4412 (id 0xe4412220)
[ 0.000000] exynos4_init_clocks: initializing clocks
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] s3c_register_clksrc: clock armclk has no registers set
[ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
[ 0.000000] audiocdclk: no parent clock specified
[ 0.000000] exynos4_setup_clocks: registering clocks
[ 0.000000] exynos4_setup_clocks: xtal is 24000000
[ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000
V=350000000
[ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
[ 0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
[ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
[ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
[ 0.000000] Unable to set parent aclk_160 of clock dout_mmc0.
[ 0.000000] Unable to set parent aclk_160 of clock dout_mmc1.
[ 0.000000] Unable to set parent aclk_160 of clock dout_mmc2.
[ 0.000000] On node 0 totalpages: 524032
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 193040 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2574 pages used for memmap
[ 0.000000] HighMem zone: 326898 pages, LIFO batch:31
[ 0.000000] Running under secure firmware.
[ 0.000000] PERCPU: Embedded 10 pages/cpu @c16f9000 s18496 r8192 d14272
u40960
[ 0.000000] pcpu-alloc: s18496 r8192 d14272 u40960 alloc=10*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 519938
[ 0.000000] Kernel command line: console=tty1 mem=2047M
earlyprintk=serial,ttySAC1,115200n8 console=tty1 console=ttySAC1,115200n8
fb_x_res=1280 fb_y_res=720 hdmi_phy_res=720
root=UUID=b8348df1-266c-4df4-b6ca-3a82803afe17 rootwait ro mem=2047M debug
log_buf_len=10M
[ 0.000000] log_buf_len: 16777216
[ 0.000000] early log buf free: 127528(97%)
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Memory: 2047MB = 2047MB total
[ 0.000000] Memory: 1784456k/3568912k available, 623344k reserved, 1317888K
highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05b3950 (5807 kB)
[ 0.000000] .init : 0xc05b4000 - 0xc05e4840 ( 195 kB)
[ 0.000000] .data : 0xc05e6000 - 0xc0646ce0 ( 388 kB)
[ 0.000000] .bss : 0xc0646ce0 - 0xc06e3c6c ( 628 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:549
[ 0.000000] I-pipe, 24.000 MHz clocksource
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
178956ms
[ 0.000000] Interrupt pipeline (release #3)
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.013274] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
[ 0.062786] pid_max: default: 32768 minimum: 301
[ 0.067874] Mount-cache hash table entries: 512
[ 0.073681] Initializing cgroup subsys cpuacct
[ 0.078109] Initializing cgroup subsys devices
[ 0.082674] CPU: Testing write buffer coherency: ok
[ 0.087832] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[ 0.093655] Setting up static identity map for 0x404446d8 - 0x40444730
[ 0.100207] L310 cache controller enabled
[ 0.104231] l2x0: 16 ways, CACHE_ID 0x000000c0, AUX_CTRL 0x7e470001, Cache
size: 1048576 B
[ 0.159021] CPU1: Booted secondary processor
[ 0.178594] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[ 0.189009] CPU2: Booted secondary processor
[ 0.208593] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[ 0.219033] CPU3: Booted secondary processor
[ 0.238594] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[ 0.238650] Brought up 4 CPUs
[ 0.272027] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
[ 0.280584] devtmpfs: initialized
[ 0.297760] regulator-dummy: no parameters
[ 0.309276] NET: Registered protocol family 16
[ 0.326240] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.343656] s5p_hdmi_cec_set_platdata()
[ 0.356027] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint
registers.
[ 0.363985] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.370086] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.376479] EXYNOS4x12 PMU Initialize
[ 0.383970] EXYNOS: Initializing architecture
[ 0.389774] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000,
tin=divclk, base 0
[ 0.398423] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000,
tin=divclk, base 8
[ 0.435310] bio: create slab <bio-0> at 0
[ 0.440225] hdmi_5v: 5000 mV
[ 0.446048] usbcore: registered new interface driver usbfs
[ 0.451684] usbcore: registered new interface driver hub
[ 0.457181] usbcore: registered new device driver usb
[ 0.462792] s3c-i2c s3c2440-i2c.0: slave address 0x10
[ 0.467785] s3c-i2c s3c2440-i2c.0: bus frequency set to 71 KHz
[ 0.474885] max77686 0-0009: device found
[ 0.479103] max77686 0-0009: irq is not specified
[ 0.487194] LDO1 VDD_ALIVE: 1000 mV
[ 0.494591] LDO2 VDDQ_M1_1V8: 1200 mV
[ 0.502129] LDO3 VDDQ_AUD_1V8: 1800 mV
[ 0.509816] LDO4 VDDQ_MMC2_2V8: 2800 mV
[ 0.517555] LDO5 VDDQ_MMC1_1V8: 1800 mV
[ 0.525295] LDO6 VDD10_MPLL_1V0: 1000 mV
[ 0.533118] LDO7 VDD10_EPLL_1V0: 1000 mV
[ 0.540963] LDO8 VDD10_MIPI_1V0: 1000 mV
[ 0.548260] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
[ 0.553698] LDO9 VT_CORE_1V0: 1000 mV
[ 0.559610] LDO10 VDD18_MIPI_1V8: 1800 mV
[ 0.567517] LDO11 VDD18_ABB1_1V8: 1800 mV
[ 0.573667] vdd_ldo12 range: 3300 mV
[ 0.581110] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
[ 0.589294] LDO14 VDD18_ADC_1V8: 1800 mV
[ 0.595328] vdd_ldo15 range: 1000 mV
[ 0.602784] LDO16 VDD18_HSIC: 1800 mV
[ 0.610374] LDO17 VDDQ_CAM_1V8: 1800 mV
[ 0.617510] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
[ 0.623112] LDO18 VDDQ_ISP_1V8: 1800 mV
[ 0.628654] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
[ 0.634091] LDO19 VT_CAM_1V8: 1800 mV
[ 0.639855] LDO20 EMMC_IO_1V8: 1800 mV
[ 0.647496] LDO21 TFLASH_2V8: 2800 mV
[ 0.655045] LDO22 2V8: 2800 mV
[ 0.661385] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
[ 0.667077] LDO23 VDD_TOUCH_2V8: 2800 mV
[ 0.674449] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
[ 0.680408] LDO24 VDD_TOUCHLED_3V3: 3300 mV
[ 0.688630] LDO25 VDDQ_LCD_3V0: 1800 mV
[ 0.695745] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
[ 0.701438] LDO26 VDD_MOTOR_3V0: 3000 mV
[ 0.707051] BUCK1 vdd_mif: 1100 mV
[ 0.712583] BUCK2 vdd_arm: 800 <--> 1500 mV at 1400 mV
[ 0.719318] BUCK3 vdd_int: 1125 mV
[ 0.724856] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1125 mV
[ 0.733881] BUCK5 VDDQ_CKEM1_2: 1200 mV
[ 0.741604] BUCK6 1V35: 1350 mV
[ 0.748643] BUCK7 2V0: 2000 mV
[ 0.753836] ODROIDU2: Regulator BUCK8
[ 0.880550] BUCK8 3V0: 3300 mV
[ 0.886897] BUCK9 1V2: ODROIDU2: Disabled regulator
[ 0.891717] BUCK9 1V2: 1200 mV
[ 0.896132] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.901555] s3c-i2c s3c2440-i2c.1: slave address 0x10
[ 0.906601] s3c-i2c s3c2440-i2c.1: bus frequency set to 71 KHz
[ 0.913023] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.918440] s3c-i2c s3c2440-i2c.3: slave address 0x10
[ 0.923486] s3c-i2c s3c2440-i2c.3: bus frequency set to 71 KHz
[ 0.929670] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[ 0.935087] s3c-i2c s3c2440-i2c.7: slave address 0x10
[ 0.940144] s3c-i2c s3c2440-i2c.7: bus frequency set to 71 KHz
[ 0.946325] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[ 0.951757] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
[ 0.957312] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 71 KHz
[ 0.964013] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
[ 0.970079] media: Linux media interface: v0.10
[ 0.974751] Linux video capture interface: v2.00
[ 0.980865] Advanced Linux Sound Architecture Driver Initialized.
[ 0.988218] Switching to clocksource ipipe_tsc
[ 1.016994] NET: Registered protocol family 2
[ 1.021820] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.028951] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 1.035556] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.041920] TCP: reno registered
[ 1.045158] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 1.051177] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 1.057906] NET: Registered protocol family 1
[ 1.062501] Trying to unpack rootfs image as initramfs...
[ 1.546098] Freeing initrd memory: 8104K
[ 1.550359] CPU PMU: probing PMU on CPU 1
[ 1.554329] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7
counters available
[ 1.564970] I-pipe: head domain Xenomai registered.
[ 1.569847] Xenomai: hal/arm started.
[ 1.574053] Xenomai: scheduling class idle registered.
[ 1.579135] Xenomai: scheduling class rt registered.
[ 1.594882] Xenomai: real-time nucleus v2.6.3 (Lies and Truths) loaded.
[ 1.601448] Xenomai: debug mode enabled.
[ 1.606433] Xenomai: starting native API services.
[ 1.611184] Xenomai: starting POSIX services.
[ 1.615718] Xenomai: starting RTDM services.
[ 1.620615] bounce pool size: 64 pages
[ 1.641851] msgmni has been set to 1439
[ 1.646805] io scheduler noop registered
[ 1.650681] io scheduler deadline registered
[ 1.655444] io scheduler cfq registered (default)
[ 1.674662] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
[ 1.681150] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32
Num_Events-32
[ 1.697949] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
[ 1.704432] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32
Num_Events-32
[ 1.715149] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
[ 1.721630] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1
Num_Events-32
[ 1.886846] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.895499] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a
S3C6400/10
[ 1.903708] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a
S3C6400/10
[ 1.911445] console [ttySAC1] enabled, bootconsole disabled
1.911445] console [ttySAC1] enabled, bootconsole disabled
[ 1.923304] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a
S3C6400/10
[ 1.925900] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a
S3C6400/10
[ 1.934237] [drm] Initialized drm 1.1.0 20060810
[ 1.937745] Mali<2>: Inserting Mali v19 device driver.
[ 1.942949] Mali<2>: Compiled: Sep 25 2014, time: 11:01:49.
[ 1.948493] Mali<2>: Driver revision:
[ 1.952201] Mali<2>: mali_module_init() registering driver
[ 1.957733] Mali<2>: mali_probe(): Called for platform device mali-utgard
[ 1.964459] Mali<2>: Memory system initializing
[ 1.968963] Mali<2>: Using device defined memory settings (dedicated:
0x00000000@0x00000000, shared: 0x10000000)
[ 1.979115] Mali<2>: Mali OS memory allocator created with max allocation
size of 0x10000000 bytes, cpu_usage_adjust 0x00000000
[ 1.990562] Mali<2>: Using device defined frame buffer settings
(0x00000000@0x00000000)
[ 1.998558] mali-utgard mali-utgard.0: start latency exceeded, new value 459
ns
[ 2.005831] mali-utgard mali-utgard.0: state restore latency exceeded, new
value 3584 ns
[ 2.013902] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
[ 2.019605] Mali<2>: Mali PP: Base address of PP core: 0x13008000
[ 2.025746] Mali<2>: Found Mali GPU Mali-400 MP r1p1
[ 2.032018] Mali<2>: Mali L2 cache: Creating Mali L2 cache: Mali_L2
[ 2.036881] Mali<2>: Mali MMU: Creating Mali MMU: Mali_GP_MMU
[ 2.042608] Mali<2>: Mali GP: Creating Mali GP core: Mali_GP
[ 2.048269] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP0_MMU
[ 2.054083] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
[ 2.059761] Mali<2>: Mali PP: Base address of PP core: 0x13008000
[ 2.065875] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP1_MMU
[ 2.071656] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP1
[ 2.077347] Mali<2>: Mali PP: Base address of PP core: 0x1300a000
[ 2.083480] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP2_MMU
[ 2.089280] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP2
[ 2.094971] Mali<2>: Mali PP: Base address of PP core: 0x1300c000
[ 2.101085] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP3_MMU
[ 2.106869] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP3
[ 2.112559] Mali<2>: Mali PP: Base address of PP core: 0x1300e000
[ 2.118687] Mali<2>: 4+0 PP cores initialized
[ 2.122992] Mali<2>: Mali GPU Utilization: No utilization handler installed
[ 2.129964] Mali<2>: = clk_set_rate : 533 , 1000000
[ 2.135260] Mali<2>: = clk_get_rate: 533
[ 2.138855] Mali: init_mali_clock mali_clock c060cff0
[ 2.144709] Mali<1>: = regulator_enable -> use cnt: 1
[ 2.149100] Mali<2>: = regulator_set_voltage: 1125000, 1125000
[ 2.158157] Mali<1>: = regulator_get_voltage: 1125000
[ 2.160086] Mali<2>: MALI Clock is set at mali driver
[ 2.166180] Mali<2>: mali_probe(): Successfully initialized driver for
platform device mali-utgard
[ 2.174104] mali-utgard mali-utgard.0: stop latency exceeded, new value 542
ns
[ 2.181305] mali-utgard mali-utgard.0: state save latency exceeded, new
value 7917 ns
[ 2.189546] Mali: Mali device driver loaded
[ 2.193752] UMP: UMP device driver loaded
[ 2.211508] brd: module loaded
[ 2.219095] loop: module loaded
[ 2.219324] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.223369] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[ 2.228378] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 2.235888] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
[ 2.247687] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
[ 2.247876] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.254256] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.261446] usb usb1: Product: S5P EHCI Host Controller
[ 2.266651] usb usb1: Manufacturer: Linux 3.8.13.11-xen ehci_hcd
[ 2.272630] usb usb1: SerialNumber: s5p-ehci
[ 2.277865] hub 1-0:1.0: USB hub found
[ 2.280598] hub 1-0:1.0: 3 ports detected
[ 2.285275] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.290877] exynos-ohci exynos-ohci: Already power on PHY
[ 2.296139] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
[ 2.302151] exynos-ohci exynos-ohci: new USB bus registered, assigned bus
number 2
[ 2.309704] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
[ 2.371786] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.372965] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.380162] usb usb2: Product: EXYNOS OHCI Host Controller
[ 2.385629] usb usb2: Manufacturer: Linux 3.8.13.11-xen ohci_hcd
[ 2.391608] usb usb2: SerialNumber: exynos-ohci
[ 2.397071] hub 2-0:1.0: USB hub found
[ 2.399868] hub 2-0:1.0: 3 ports detected
[ 2.509141] usb3503 0-0008: CFG1 failed (-111)
[ 2.509206] usb3503 0-0008: usb3503_probe: probed on hub mode
[ 2.514564] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[ 2.527282] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
[ 2.527744] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 500 ns
[ 2.534821] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new
value 17833 ns
[ 2.542819] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 333 ns
[ 2.549831] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value
3917 ns
[ 2.552776] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
[ 2.563449] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 292 ns
[ 2.570576] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new
value 37500 ns
[ 2.578542] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 333 ns
[ 2.585544] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value
3459 ns
[ 2.587776] s5p-fimc exynos4-fimc.2: sclk_fimc rate is 176000000
[ 2.599153] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 334 ns
[ 2.602703] usb 1-2: new high-speed USB device number 2 using s5p-ehci
[ 2.612704] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 375 ns
[ 2.619804] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new
value 16208 ns
[ 2.627793] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 375 ns
[ 2.634800] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value
3333 ns
[ 2.637773] s5p-fimc exynos4-fimc.3: sclk_fimc rate is 176000000
[ 2.648426] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 334 ns
[ 2.655536] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new
value 15917 ns
[ 2.663525] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 333 ns
[ 2.670531] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value
3292 ns
[ 2.673696] s5p-fimc-md: Registered fimc.0.m2m as /dev/video0
[ 2.674043] s5p-fimc-md: Registered fimc.0.capture as /dev/video1
[ 2.674374] s5p-fimc-md: Registered fimc.1.m2m as /dev/video2
[ 2.674713] s5p-fimc-md: Registered fimc.1.capture as /dev/video3
[ 2.675047] s5p-fimc-md: Registered fimc.2.m2m as /dev/video4
[ 2.675378] s5p-fimc-md: Registered fimc.2.capture as /dev/video5
[ 2.675717] s5p-fimc-md: Registered fimc.3.m2m as /dev/video6
[ 2.676049] s5p-fimc-md: Registered fimc.3.capture as /dev/video7
[ 2.677718] sclk_mfc rate is: 220
[ 2.678149] s5p-mfc s5p-mfc: decoder registered as /dev/video8
[ 2.678482] s5p-mfc s5p-mfc: encoder registered as /dev/video9
[ 2.685360] s5p-hdmiphy 8-0038: probe successful
[ 2.685383] s5p-tv: Board is ODROID-X/X2/U2
[ 2.685390] s5p-hdmi exynos4-hdmi: probe successful
[ 2.685600] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co.,
Ltd.
[ 2.685600]
[ 2.696749] s5p-mixer s5p-mixer: probe start
[ 2.696883] s5p-mixer s5p-mixer: resources acquired
[ 2.696899] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from
module 's5p-hdmi'
[ 2.696907] s5p-mixer s5p-mixer: module s5p-sdo is missing
[ 2.697307] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video10
[ 2.733038] usb 1-2: New USB device found, idVendor=0424, idProduct=9730
[ 2.733046] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.805908] fb0: registered frame buffer emulation for /dev/video10
[ 2.805918] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 458 ns
[ 2.819551] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video11
[ 2.826251] fb1: registered frame buffer emulation for /dev/video11
[ 2.832453] s5p-mixer s5p-mixer: registered layer video0 as /dev/video12
[ 2.839170] fb2: registered frame buffer emulation for /dev/video12
[ 2.845029] s5p-mixer s5p-mixer: probe successful
[ 2.850462] s5p-g2d s5p-g2d.0: device registered as /dev/video13
[ 2.856675] Exynos: Kernel Thermal management registered
[ 2.861364] sdhci: Secure Digital Host Controller Interface driver
[ 2.867137] sdhci: Copyright(c) Pierre Ossman
[ 2.871624] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2
(440000000 Hz)
[ 2.879107] mmc0: no vqmmc regulator found
[ 2.883109] mmc0: no vmmc regulator found
[ 2.917700] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using
ADMA
[ 2.921092] dw_mmc dw_mmc: Using internal DMA controller.
[ 2.924907] mmc1: no vmmc regulator found
[ 2.957711] DWMMC: Div 2 = 125
[ 2.957767] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req
400000Hz, actual 400000HZ div = 125)
[ 2.957771] dw_mmc dw_mmc: Version ID is 240a
[ 2.957780] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data
width, 128 deep fifo
[ 2.964436] usbcore: registered new interface driver usbhid
[ 2.964440] usbhid: USB HID core driver
[ 2.987116] usb 1-3: new high-speed USB device number 3 using s5p-ehci
[ 2.998123] max98090 1-0010: revision 0x43
[ 3.006342] [MAX98090] max98090_set_record_main_mic(150)
[ 3.009018] hkdk-snd-max89090 hkdk-snd-max89090: max98090-aif1 <->
samsung-i2s.0 mapping ok
[ 3.016522] hkdk-snd-max89090 hkdk-snd-max89090: max98090-aif1 <->
samsung-i2s.0 mapping ok
[ 3.025540] TCP: cubic registered
[ 3.026232] NET: Registered protocol family 17
[ 3.030860] VFP support v0.3: implementor 41 architecture 3 part 30 variant
9 rev 4
[ 3.038405] ThumbEE CPU extension supported.
[ 3.042624] Registering SWP/SWPB emulation handler
[ 3.051490] LDO20 EMMC_IO_1V8: incomplete constraints, leaving on
[ 3.055192] LDO10 VDD18_MIPI_1V8: incomplete constraints, leaving on
[ 3.060745] DRM: mali_platform_drm_probe()
[ 3.063832] mali_drm_init(), driver name: mali_drm, version 0.1
[ 3.063843] mmc1: BKOPS_EN bit is not set
[ 3.074299] DRM: mali_driver_load()
[ 3.077187] [drm] Initialized mali_drm 0.1.0 20100520 on minor 0
[ 3.083203] DWMMC: Div 1 = 1
[ 3.085997] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req
52000000Hz, actual 50000000HZ div = 1)
[ 3.086005] s3c-rtc s3c64xx-rtc: setting system clock to 2014-09-30 04:07:31
UTC (1412050051)
[ 3.089586] exynos4_dvfs_hotplug_init, max(2000000),min(0)
[ 3.089663] ALSA device list:
[ 3.089666] #0: Built-in Audio
[ 3.116392] mmc1: new high speed DDR MMC card at address 0001
[ 3.116488] Freeing init memory: 192K
[ 3.123026] usb 1-3: New USB device found, idVendor=0424, idProduct=3503
[ 3.123031] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.123751] hub 1-3:1.0: USB hub found
[ 3.123896] hub 1-3:1.0: 3 ports detected
[ 3.147241] mmcblk0: mmc1:0001 008G92 7.28 GiB
[ 3.151473] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB
[ 3.157367] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB
[ 3.163279] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB
[ 3.169982] mmcblk0: p1 p2
[ 3.173347] mmcblk0boot1: unknown partition table
[ 3.175720] udevd[1348]: starting version 175
[ 3.182552] mmcblk0boot0: unknown partition table
Loading, please wait...
[ 3.736164] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode.
Opts: (null)
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[ 4.291195] udevd[1605]:
starting version 175
[ ok .
[....] Synthesizing the initial hotplug events...[ 4.534198] input:
gpio-keys as /devices/platform/gpio-keys.0/input/input0
[ 4.568213] s5p-g2d s5p-g2d.0: instance opened
[ 4.568429] s5p-g2d s5p-g2d.0: instance closed
[ 4.643526] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new
value 17917 ns
[ 4.645996] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 625 ns
[ 4.653105] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value
51125 ns
[ 4.659723] s5p-mfc s5p-mfc: start latency exceeded, new value 458 ns
[ 4.659729] s5p-mfc s5p-mfc: state restore latency exceeded, new value 1583
ns
[ 4.674301] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 792 ns
[ 4.683166] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 416 ns
[ 4.683180] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new
value 19833 ns
[ 4.683203] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 500 ns
[ 4.685276] s5p-mixer s5p-mixer: start latency exceeded, new value 333 ns
[ 4.685315] s5p-mixer s5p-mixer: state restore latency exceeded, new value
32583 ns
[ 4.685511] s5p-mixer s5p-mixer: stop latency exceeded, new value 500 ns
[ 4.685522] s5p-mixer s5p-mixer: start latency exceeded, new value 542 ns
[ 4.685536] s5p-mixer s5p-mixer: state save latency exceeded, new value 9000
ns
[ 4.708612] s5p-mixer s5p-mixer: stop latency exceeded, new value 584 ns
[ 4.708636] s5p-mixer s5p-mixer: state save latency exceeded, new value
10000 ns
[ 4.757199] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new
value 4574959 ns
[ 4.766108] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 833 ns
[ 4.767885] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 541 ns
[ 4.774933] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value
25958 ns
[ 4.782698] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 625 ns
[ 4.790157] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 708 ns
[ 4.796778] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value
6209 ns
[ 4.807284] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 1125
ns
[ 4.811980] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value
366375 ns
[ 4.819422] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 1125 ns
[ ok done.
[ 4.875524] smsc95xx v1.0.4
[ 4.878837] smsc95xx_read_mac_addr : Can't file(/etc/smsc95xx_mac_addr)
create!!
[ 4.880623] smsc95xx 1-2:1.0 (unregistered net_device): Failed to write
/etc/smsc95xx_mac_addr file!
[....] Waiting for /dev to be fully populated...[ 4.942973] smsc95xx 1-2:1.0
eth0: register 'smsc95xx' at usb-s5p-ehci-2, smsc95xx USB 2.0 Ethernet,
5e:ae:5c:c6:13:e1
[ 4.948187] usbcore: registered new interface driver smsc95xx
[ 5.115044] s5p_mfc_alloc_and_load_firmware:44: Firmware is not present in
the /lib/firmware directory nor compiled in kernel
[ 5.120762] s5p-mfc s5p-mfc: stop latency exceeded, new value 708 ns
[ 5.127126] s5p-mfc s5p-mfc: state save latency exceeded, new value 1583 ns
[ 5.135297] s5p-mfc s5p-mfc: state restore latency exceeded, new value 2292
ns
[ 5.148422] s5p_mfc_alloc_and_load_firmware:44: Firmware is not present in
the /lib/firmware directory nor compiled in kernel
[ 5.154141] s5p-mfc s5p-mfc: stop latency exceeded, new value 917 ns
[ ok done.
[....] Setting parameters of disc: (none)[ ok .
[....] Activating swap...[ ok done.
[ 5.505059] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[....] Cleaning up temporary files... /tmp[ ok .
[....] Activating lvm and md swap...[ ok done.
[....] Checking file systems...fsck from util-linux 2.20.1
dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN
/dev/mmcblk0p1: 52 files, 16645/32857 clusters
[ ok done.
[....] Mounting local filesystems...[ ok done.
[....] Activating swapfile swap...[ ok done.
[....] Cleaning up temporary files...[ ok .
[....] Setting kernel variables ...[ ok done.
[....] Configuring network interfaces...[ 8.717522] smsc95xx 1-2:1.0 eth0:
link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 9.010862] [MAX98090] max98090_set_playback_speaker_headset(111)
Starting rpcbind daemon...rpcbind: cannot create socket for udp6
rpcbind: cannot create socket for tcp6
.
Starting NFS common utilities: statd[ 9.740247] RPC: Registered named UNIX
socket transport module.
[ 9.740534] RPC: Registered udp transport module.
[ 9.745227] RPC: Registered tcp transport module.
[ 9.749907] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.088083] Installing knfsd (copyright (C) 1996 [email protected]).
idmapd.
[ 10.271807] NFS: Registering the id_resolver key type
[ 10.271901] Key type id_resolver registered
[ 10.275402] Key type id_legacy registered
ifup: interface eth0 already configured
[ ok done.
[....] Starting rpcbind daemon...[....] Already running.[ ok .
[....] Starting NFS common utilities: statd idmapd[ ok .
[....] Cleaning up temporary files...[ ok .
[....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[ ok .
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting rpcbind daemon...[....] Already running.[ ok .
[....] Starting enhanced syslogd: rsyslogd[ ok .
[....] Starting NFS common utilities: statd idmapd[ ok .
[....] Starting ACPI services...RTNETLINK1 answers: No such file or directory
acpid: error talking to the kernel via netlink
[ ok .
[....] Starting periodic command scheduler: cron[ ok .
[....] Starting NTP server: ntpd[ ok .
[....] Starting OpenBSD Secure Shell server: sshd[ ok .
[....] Starting system message bus: dbus[ ok .
[....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[ ok .
saned disabled; edit /etc/default/saned
[ 73.229506] ps invoked oom-killer: gfp_mask=0x800d0, order=0, oom_score_adj=0
[ 73.231032] ps cpuset=/ mems_allowed=0
[ 73.238894] [<c0015528>] (unwind_backtrace+0x0/0xf8) from [<c043e300>]
(dump_header.isra.9+0x68/0x17c)
[ 73.244060] [<c043e300>] (dump_header.isra.9+0x68/0x17c) from [<c01277e8>]
(oom_kill_process+0x25c/0x3ac)
[ 73.253580] [<c01277e8>] (oom_kill_process+0x25c/0x3ac) from [<c0127d6c>]
(out_of_memory+0x26c/0x2b0)
[ 73.262764] [<c0127d6c>] (out_of_memory+0x26c/0x2b0) from [<c012ba00>]
(__alloc_pages_nodemask+0x904/0x928)
[ 73.272476] [<c012ba00>] (__alloc_pages_nodemask+0x904/0x928) from
[<c012ba34>] (__get_free_pages+0x10/0x24)
[ 73.282277] [<c012ba34>] (__get_free_pages+0x10/0x24) from [<c01a7c54>]
(proc_info_read+0x40/0xdc)
[ 73.291212] [<c01a7c54>] (proc_info_read+0x40/0xdc) from [<c015d654>]
(vfs_read+0x9c/0x140)
[ 73.299536] [<c015d654>] (vfs_read+0x9c/0x140) from [<c015d734>]
(sys_read+0x3c/0x70)
[ 73.307342] [<c015d734>] (sys_read+0x3c/0x70) from [<c000e9c0>]
(ret_fast_syscall+0x0/0x34)
[ 73.315660] Mem-info:
[ 73.317895] Normal per-cpu:
[ 73.320679] CPU 0: hi: 186, btch: 31 usd: 52
[ 73.332481] CPU 1: hi: 186, btch: 31 usd: 69
[ 73.332538] CPU 2: hi: 186, btch: 31 usd: 156
[ 73.336416] CPU 3: hi: 186, btch: 31 usd: 47
[ 73.341186] HighMem per-cpu:
[ 73.349817] CPU 0: hi: 186, btch: 31 usd: 74
[ 73.349876] CPU 1: hi: 186, btch: 31 usd: 163
[ 73.353759] CPU 2: hi: 186, btch: 31 usd: 68
[ 73.358520] CPU 3: hi: 186, btch: 31 usd: 167
[ 73.363295] active_anon:3029 inactive_anon:80 isolated_anon:0
[ 73.363295] active_file:914 inactive_file:26899 isolated_file:0
[ 73.363295] unevictable:6034 dirty:0 writeback:21618 unstable:3382
[ 73.363295] free:365186 slab_reclaimable:21851 slab_unreclaimable:78307
[ 73.363295] mapped:1961 shmem:85 pagetables:219 bounce:0
[ 73.363295] free_cma:65274
[ 73.396106] Normal free:293796kB min:32768kB low:40960kB high:49152kB
active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:136kB
unevictable:0kB isolated(anon):0kB isolated(file):0kB present:772160kB
managed:466568kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB
slab_reclaimable:87404kB slab_unreclaimable:313228kB kernel_stack:35392kB
pagetables:876kB unstable:0kB bounce:0kB free_cma:261096kB writeback_tmp:0kB
pages_scanned:8872 all_unreclaimable? yes
[ 73.437905] lowmem_reserve[]: 0 10215 10215
[ 73.443954] HighMem free:1166948kB min:512kB low:14384kB high:28256kB
active_anon:12116kB inactive_anon:320kB active_file:3660kB
inactive_file:107460kB unevictable:24136kB isolated(anon):0kB
isolated(file):0kB present:1307592kB managed:1317888kB mlocked:24136kB
dirty:0kB writeback:86472kB mapped:7844kB shmem:340kB slab_reclaimable:0kB
slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:13528kB
bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[ 73.484835] lowmem_reserve[]: 0 0 0
[ 73.488243] Normal: 43*4kB (UM) 35*8kB (UMC) 26*16kB (M) 19*32kB (UMC)
14*64kB (UMC) 12*128kB (MC) 10*256kB (EMC) 11*512kB (UEMC) 5*1024kB (EM)
5*2048kB (MC) 65*4096kB (RC) = 293700kB
[ 73.504558] HighMem: 1553*4kB (UM) 690*8kB (UM) 317*16kB (UM) 180*32kB (UM)
93*64kB (UM) 30*128kB (UM) 24*256kB (UM) 10*512kB (UM) 3*1024kB (UM) 3*2048kB
(UM) 272*4096kB (UMR) = 1166948kB
[ 73.521218] 28319 total pagecache pages
[ 73.526089] 0 pages in swap cache
[ 73.530070] Swap cache stats: add 0, delete 0, find 0/0
[ 73.533545] Free swap = 0kB
[ 73.536388] Total swap = 0kB
[ 73.625353] 1048064 pages of RAM
[ 73.625403] 741072 free pages
[ 73.625915] 20640 reserved pages
[ 73.630964] 171398 slab pages
[ 73.632058] 592340 pages shared
[ 73.635170] 0 pages swap cached
[ 73.638314] [ pid ] uid tgid total_vm rss nr_ptes swapents
oom_score_adj name
[ 73.646141] [ 1605] 0 1605 639 318 4 0
-1000 udevd
[ 73.660618] [ 2920] 0 2920 473 194 3 0
0 rpcbind
[ 73.663075] [ 2933] 103 2933 551 280 4 0
0 rpc.statd
[ 73.680625] [ 2952] 0 2952 571 175 3 0
0 rpc.idmapd
[ 73.683340] [ 3259] 0 3259 6879 374 6 0
0 rsyslogd
[ 73.701140] [ 3383] 0 3383 333 132 3 0
0 acpid
[ 73.706415] [ 3397] 0 3397 463 176 3 0
0 cron
[ 73.716297] [ 3400] 101 3400 1172 391 5 0
0 ntpd
[ 73.723648] [ 3434] 0 3434 1290 248 4 0
-1000 sshd
[ 73.730796] [ 3456] 104 3456 646 225 4 0
0 dbus-daemon
[ 73.742246] [ 3500] 107 3500 715 351 4 0
0 avahi-daemon
[ 73.747988] [ 3501] 107 3501 690 125 4 0
0 avahi-daemon
[ 73.754186] [ 3530] 0 3530 460 180 3 0
0 getty
[ 73.763341] [ 3531] 0 3531 460 180 3 0
0 getty
[ 73.773442] [ 3532] 0 3532 460 180 3 0
0 getty
[ 73.780235] [ 3533] 0 3533 460 180 4 0
0 getty
[ 73.785320] [ 3534] 0 3534 460 180 4 0
0 getty
[ 73.794893] [ 3535] 0 3535 460 180 3 0
0 getty
[ 73.805040] [ 3536] 0 3536 638 258 4 0
-1000 udevd
[ 73.811796] [ 3537] 0 3537 638 258 4 0
-1000 udevd
[ 73.817872] [ 3538] 0 3538 2177 715 6 0
0 sshd
[ 73.831421] [ 3543] 0 3543 6866 817 9 0
0 console-kit-dae
[ 73.837427] [ 3610] 0 3610 5549 635 7 0
0 polkitd
[ 73.847766] [ 3616] 1000 3616 2440 642 7 0
0 sshd
[ 73.851107] [ 3621] 1000 3621 680 407 3 0
0 bash
[ 73.859448] [ 3632] 1000 3632 607 137 3 0
0 gpg-agent
[ 73.876118] [ 3635] 0 3635 755 342 4 0
0 sudo
[ 73.878362] [ 3636] 0 3636 370 129 3 0
0 xeno-regression
[ 73.889993] [ 3637] 0 3637 545 268 3 0
0 bash
[ 73.896706] [ 3638] 0 3638 341 115 3 0
0 dohell
[ 73.904646] [ 3639] 0 3639 3078 3040 8 0
0 switchtest
[ 73.911285] [ 3640] 0 3640 3142 3104 8 0
0 switchtest
[ 73.929813] [ 3641] 0 3641 566 508 4 0
0 latency
[ 73.936223] [ 3642] 0 3642 341 66 3 0
0 dohell
[ 73.940301] [ 3643] 0 3643 341 67 3 0
0 dohell
[ 73.951169] [ 3644] 0 3644 341 66 3 0
0 dohell
[ 73.962422] [ 3646] 0 3646 413 129 4 0
0 dd
[ 73.967453] [ 3648] 0 3648 341 66 3 0
0 dohell
[ 73.979465] [ 3649] 0 3649 329 97 3 0
0 sleep
[ 73.982835] [ 3651] 0 3651 595 281 4 0
0 ls
[ 73.991322] [ 3969] 1000 3969 667 290 4 0
0 top
[ 73.997213] [ 7660] 0 7660 666 382 4 0
0 dd
[ 74.006496] [ 7848] 0 7848 341 17 3 0
0 dohell
[ 74.012845] [11962] 0 11962 551 181 4 0
0 ps
[ 74.022176] Out of memory: Kill process 3616 (sshd) score 1 or sacrifice
child
[ 74.031554] Killed process 3621 (bash) total-vm:2720kB, anon-rss:472kB,
file-rss:1156kB
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0003-Exynos4-ipipe.patch
Type: text/x-patch
Size: 8044 bytes
Desc: not available
URL:
<http://www.xenomai.org/pipermail/xenomai/attachments/20140930/a54442a2/attachment.bin>
_______________________________________________
Xenomai mailing list
[email protected]
http://www.xenomai.org/mailman/listinfo/xenomai
