No, not as far as I can tell. I have tried to find out how to tell. The only clue I get from the web is to check the /proc/interrupts /proc/xenomai/irq The interrupt exists only once in the /proc/xenomai/irq.
Are there other means to check this? Best regards Terje -----Original Message----- From: Gilles Chanteperdrix [mailto:[email protected]] Sent: 2. desember 2014 13:13 To: Terje Frøysa Cc: [email protected] Subject: Re: [Xenomai] IRQ155 not handled. Disabling IRQ line On Tue, Dec 02, 2014 at 12:07:50PM +0000, Terje Frøysa wrote: > Thanks Gilles, > > I think setting the IRQ type mended the problem. > > Before that I did some digging: > I couldn't find any information that indicated a shared interrupt: > The /proc/interrupts did not contain the IRQ155 and the /proc/xenomai/irq > held only one entry for my driver (below). > The external interrupt source is a PWM generated pulse-train of 200Hz, i.e. > 5ms interval started the code-line before entering the read-loop. > You say that the line must have been unserved for a 1000 events before being > disabled. > A 1000 events from when and at what rate if EDGE not spesified? The irq > handler have no optional returns but "RT_INTR_HANDLED". > Hence, I cannot imagine where the non-handled returns are coming from. At 5ms > rate this would require 5s of pulses to reach 1000. > The distance in time from IRQ enable to disable the IRQ line seem less than > 4us.. > [19833.958667] RTDM IMU 27 - enable IRQ [19838.962472] Xenomai: > xnintr_irq_handler: IRQ155 not handled. Disabling IRQ line. > > However, I changed the flags to "RTDM_IRQTYPE_EDGE" and it seemed to have a > good effect. > I don't get the message any longer If the default irq type is say level low, your pwm signal being low for for instance 5ms generates interrupts during 5ms, and since the interrupt condition (low level) is still true, the interrupt triggers over and over again. Is the interrupt shared with Linux ? -- Gilles. _______________________________________________ Xenomai mailing list [email protected] http://www.xenomai.org/mailman/listinfo/xenomai
