On Sunday, December 06, 2015 06:34 AM, Mathieu Rondonneau wrote:
On 15-12-04 07:42 PM, Joe Lee wrote:
Hi Mathieu,
I apply the patch by Xenomai latest stable v3.0.1 to my RPI2, and
sometimes the booting hang like this:
* Starting configure network device security[ OK ]
* Stopping load modules from /etc/modules[ OK ]
* Stopping userspace bootsplash[ OK ]
That's low probability, about 1 of 60 times booting, and the original
not patched kernel is OK.
The kernel is the latest version from
https://github.com/raspberrypi/linux/tree/rpi-3.18.y .
First, I apply the ipipe patch "ipipe-core-3.18.20-arm-6.patch" from
https://xenomai.org/downloads/ipipe/v3.x/arm/ . Then I apply your RPI
patch version #5. The kernel is build follow this instruction
https://www.raspberrypi.org/documentation/linux/kernel/building.md .
The root file system is Ubuntu 14.04 LTS for RPI2, which from
https://wiki.ubuntu.com/ARM/RaspberryPi .
Attached is the kernel booting hang log file and kernel config file.
What can I do to get more infomation for debugging when kernel booting hang?
Look forward to your reply.
Hi Joe,
The only difference with your .config file is that I have earlyprintk
enabled but that should not cause the issue you are observing.
I am using the raspbian rootfs downloaded from the raspberry pi
foundation website:
https://www.raspberrypi.org/downloads/raspbian/
can you try disabling xenomai from the kernel config to see if the
problem happens also when only the IPIPE patch is turned ON?
Thanks,
-Mathieu
I'm so sorry, that's my RTL8192CUS USB WIFI dongle cause the issue.
Without the dongle the patched kernel with Xenomai 3.0.1 enable is OK.
May be the USB or WIFI driver cause the issue, I'm going to test the
RT5370 WIFI dongle.
--
Joe Lee
_______________________________________________
Xenomai mailing list
[email protected]
http://xenomai.org/mailman/listinfo/xenomai
