Hello, I have examined the options, only point 1,2 and 11) Device Drivers → Input device support → Miscellaneous devices→ PC Speaker support (Press N) 12) Device Drivers → Staging Drivers (Press N)
Are not required by Xenomai, I tried to compile without touching them but after some the I get the same output. Other options are changed otherwise on the main screen there is a warning regarding the same. Also I dont have any problem with kernel 3.x but only when the kernel is 4.x, its a problem. I am not sure what I am doing wrong exactly, any guidance is highly appreciated. Best Regards Varun Deshpande On Tue, Apr 12, 2016 at 12:57 PM, Gilles Chanteperdrix < [email protected]> wrote: > On Tue, Apr 12, 2016 at 11:55:15AM +0200, Varun Deshpande wrote: > > Hello all, > > > > I am trying to compile Xenomai 3.0.2 with Kernel 4.1.18. I am running a > > 32bit Ubuntu(14.04.04). I configured the kernel and changed the following > > options > > > > 1) Enable loadable module support → Forced module loading (Press Y) > > 2) Enable loadable module support → Forced module unloading (Press Y) > > 3) Xenomai/cobalt → Drivers → RTnet → Protocol Stack → RTmac > > Layer → NoMAC discipline for RTmac (Press M) > > 4) Xenomai/cobalt → Drivers → RTnet → Drivers → (For All > > requried Drivers Press M){Exclude Others by pressing N) > > 5) Xenomai/cobalt → Drivers → RTnet → AddOns → RealTime > > Capturing Support (Press M) > > 6) Power management and ACPI options → ACPI (Advanced Configuration & > > Power Interface)Support → Processor(Press N) > > 7) Power management and ACPI options → APM (Advanced Power Management) > > BIOS support (Press N) > > 8) Power management and ACPI options → CPU Frequency scaling →CPU > > Frequency scaling (Press N) > > 9) Power management and ACPI options → CPU Idle → CPU idle PM support > > (Press N) > > 10) Networking support → Networking Options → Timestamping in > > PHYdevices (Press Y) > > 11) Device Drivers → Input device support → Miscellaneous devices→ > PC > > Speaker support (Press N) > > 12) Device Drivers → Staging Drivers (Press N) > > 13) Processor type and features --> Continuous Memory Allocator (Press > N) > > 14) Processor type and features --> Transparent Huge Page Support (Press > N) > > 15) Processor type and features --> Allow for memory compaction (Press N) > > 16) Processor type and features --> Page Migration (Press N) > > The missing key information here is the resulting kernel > configuration. You likely have some option enabled that none of our > build or run tests enables. > > -- > Gilles. > https://click-hack.org > _______________________________________________ Xenomai mailing list [email protected] https://xenomai.org/mailman/listinfo/xenomai
