Hi, all guys, I want to make the e1000e work with cobalt mode on ARM A53 with 32bit, however, I encountered some critical issues.
1> I want to use PCIe MSIx or MSI mode, but that does not work, we need to use legacy INTx on PCIe, that can work. Anyone can give some advice how to make PCIe MSIx/MSI interrupt work? 2> After modifying the e1000e driver to adapt the IPIPE interrupt mode with INTx, first, the e1000e NIC can work well, I can ping other machine, and can login other machine. But when the interrupt number reaches 1000 (that means there are 1000 interrupts on NIC), the issue is reported: [ 1577.539977] [Xenomai] xnintr_irq_handler: IRQ83 not handled. Disabling IRQ line # cat /proc/xenomai/irq IRQ CPU0 17: 6320 [timer/0] 26: 9 fsl-ifc 83: 1000 eth7 1033: 0 [sync] 1034: 0 [timer-ipi] 1035: 0 [reschedule] 1036: 0 [virtual] 1040: 0 [virtual] Since that, the NIC can't work, must reboot the board. Anyone can give some advice how to remove the interrupt number 1000 limitation? 3> after booting up the Linux with Cobalt mode and e1000e NIC, and I don't' set the IP address (not use command "ifconfig eth7 xx.xx.xx.xx up"), that means I don't enable the NIC card. After around 1 day, kernel crash as below, anyone can give some advice how to make the system stable? [253287.272440] Unhandled fault: synchronous external abort (0x1210) at 0xf05cb600 [253287.279740] pgd = 80203000 [253287.282523] [f05cb600] *pgd=80000080207003, *pmd=ecb6b003, *pte=c00050400cb713 [253287.289831] Internal error: : 1210 [#1] SMP ARM [253287.294437] Modules linked in: ipv6 [253287.298011] CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 4.1.35-ipipe #1 [253287.304699] Hardware name: Generic DT based system [253287.309571] Workqueue: events e1000e_systim_overflow_work [253287.315047] task: ed860e40 ti: ed878000 task.ti: ed878000 [253287.320523] PC is at e1000e_cyclecounter_read+0x14/0x124 [253287.325913] LR is at timecounter_read+0x14/0x8c [253287.330520] pc : [<808a3a74>] lr : [<802bcad0>] psr: 600d0013 [253287.330520] sp : ed879e68 ip : 00000000 fp : ee7a31c0 [253287.342157] r10: a014d0c8 r9 : 00000000 r8 : 00000000 [253287.347457] r7 : a014c4c0 r6 : a014f0c4 r5 : ed879ef0 r4 : a014f0e0 [253287.354059] r3 : f05cb600 r2 : 00000000 r1 : 00000000 r0 : a014f0c8 [253287.360662] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [253287.368045] Control: 30c5383d Table: eb174fc0 DAC: fffffffd [253287.373866] Process kworker/0:0 (pid: 4, stack limit = 0xed878228) [253287.380121] Stack: (0xed879e68 to 0xed87a000) [253287.384554] 9e60: 7f03c874 03046c00 812c9400 eb184900 7f03c874 a014f0e0 [253287.392808] 9e80: ed879ef0 a014f0c4 a014c4c0 00000000 00000000 00000000 ee7a31c0 802bcad0 [253287.401061] 9ea0: a014f078 a014f0c4 a014c4c0 00000000 00000000 00000000 ee7a31c0 808ae078 [253287.409315] 9ec0: 00000000 00000001 81311b94 81311b94 a014f078 ed829980 ee7a31c0 ee7a6e00 [253287.417568] 9ee0: 00000000 00000000 ed829980 808ae1dc ed814000 ee7a31c0 a014f078 ed829980 [253287.425821] 9f00: a014f078 8027a588 ee7a31c0 ee7a31d4 ed878000 ee7a31c0 ed829998 ee7a31d4 [253287.434075] 9f20: ed878000 00000008 812803dc ed829980 ee7a31c0 8027a8a0 8117c140 ee7a3324 [253287.442328] 9f40: 8027a854 00000000 ed82d000 ed829980 8027a854 00000000 00000000 00000000 [253287.450581] 9f60: 00000000 8027f700 8f0141c7 00000000 382a8206 ed829980 00000000 00000000 [253287.458834] 9f80: ed879f80 ed879f80 00000000 00000000 ed879f90 ed879f90 ed879fac ed82d000 [253287.467087] 9fa0: 8027f624 00000000 00000000 80222f54 00000000 00000000 00000000 00000000 [253287.475340] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [253287.483593] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 6822c08a 2600680a [253287.491851] [<808a3a74>] (e1000e_cyclecounter_read) from [<802bcad0>] (timecounter_read+0x14/0x8c) [253287.500889] [<802bcad0>] (timecounter_read) from [<808ae078>] (e1000e_phc_gettime+0x34/0x6c) [253287.509403] [<808ae078>] (e1000e_phc_gettime) from [<808ae1dc>] (e1000e_systim_overflow_work+0x1c/0x44) [253287.518875] [<808ae1dc>] (e1000e_systim_overflow_work) from [<8027a588>] (process_one_work+0x12c/0x3f8) [253287.528347] [<8027a588>] (process_one_work) from [<8027a8a0>] (worker_thread+0x4c/0x530) [253287.536515] [<8027a8a0>] (worker_thread) from [<8027f700>] (kthread+0xdc/0xf4) [253287.543816] [<8027f700>] (kthread) from [<80222f54>] (ret_from_fork+0x18/0x24) [253287.551115] Code: e240aa02 e24dd014 e51a37e0 e2833cb6 (e5936000) [253287.557286] ---[ end trace 795e386dc7b45ae9 ]--- [253287.562873] Unable to handle kernel paging request at virtual address ffffffec Best Regards Jerry Huang _______________________________________________ Xenomai mailing list [email protected] https://xenomai.org/mailman/listinfo/xenomai
