On 08/03/2017 04:15 PM, mohamed atef wrote: > Hi everyone, > > I'm new to Xenomai and RTOSs in general and try to make my first steps > here. I succeeded in building Xenomai libraries for imx6quad as a practice. > > Now I have a question. I have a "UDOO IMX6Quad" board and want to run > Xenomai on it. The problem is that I'm a little bit confused by something. > On the installing page here "http://xenomai.org/installing-xenomai-3-x/"; > and as I understand I support the board name at the end of the make command > here for example, it's made for a CSB637 board. > > "make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- > O=$build_root/linux csb637_defconfig" > > The *_defconfig files are in arch/arm/configs folder. The confusion comes > from here as I found a "imx_v6_v7_defconfig" file. I don't know why it's > here and imx is SoCs not boards!! and if I want to configure my board (UDOO > e.g. it's IOMuxing, etc), where should I place these files? >
Your question is primarily about installing a kernel on your SoC, which is off-topic on this list. A better forum to ask for help may be https://www.udoo.org/forum/ -- Philippe. _______________________________________________ Xenomai mailing list [email protected] https://xenomai.org/mailman/listinfo/xenomai
