This usually happens because a driver that your driver depends on is missing or not built into the kernel. Use modprobe to install your module instead of insmod. Modprobe will load dependencies. You may also want to make sure you've enabled RTNET in your config.
Greg Original Message From: shevchenko.ta...@triolcorp.com.ua Sent: April 23, 2018 2:24 AM To: g...@embeddedgreg.com Cc: xenomai@xenomai.org Subject: Re: Unknown symbol in module yeti@yeti-UDOO-x86:~$ uname -r 4.9.90-xenomai yeti@yeti-UDOO-x86:~$ dmesg|grep Xenomai [ 12.917420] [Xenomai] scheduling class idle registered. [ 12.917422] [Xenomai] scheduling class rt registered. [ 12.917480] [Xenomai] SMI-enabled chipset found, but SMI workaround disabled [ 12.918467] I-pipe: head domain Xenomai registered. [ 12.920801] [Xenomai] Cobalt v3.0.6 (Stellar Parallax) yeti@yeti-UDOO-x86:~$ dmesg [ 0.000000] Linux version 4.9.90-xenomai (root@yeti-UDOO-x86) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #2 SMP Thu Apr 5 11:18:52 EEST 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.90-xenomai root=UUID=ca0244c5-d957-4ab6-8632-01fd821fcc06 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007a4befff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a4bf000-0x000000007aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007aebf000-0x000000007bfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007bfbf000-0x000000007bffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007bfff000-0x000000007bffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007c400000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: SECO UDOO x86/UDOO x86, BIOS 1.03 08/04/2017 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 07E000000 mask FFE000000 uncachable [ 0.000000] 3 base 07D000000 mask FFF000000 uncachable [ 0.000000] 4 base 07C800000 mask FFF800000 uncachable [ 0.000000] 5 base 07C400000 mask FFFC00000 uncachable [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask F80000000 write-back [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff93fd40098000] 98000 size 24576 [ 0.000000] BRK [0x2295b4000, 0x2295b4fff] PGTABLE [ 0.000000] BRK [0x2295b5000, 0x2295b5fff] PGTABLE [ 0.000000] BRK [0x2295b6000, 0x2295b6fff] PGTABLE [ 0.000000] BRK [0x2295b7000, 0x2295b7fff] PGTABLE [ 0.000000] BRK [0x2295b8000, 0x2295b8fff] PGTABLE [ 0.000000] BRK [0x2295b9000, 0x2295b9fff] PGTABLE [ 0.000000] BRK [0x2295ba000, 0x2295bafff] PGTABLE [ 0.000000] BRK [0x2295bb000, 0x2295bbfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x10102000-0x24078fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 INSYDE) [ 0.000000] ACPI: XSDT 0x000000007BFFE120 00009C (v01 INSYDE INSYDE 00000003 01000013) [ 0.000000] ACPI: FACP 0x000000007BFF9000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x000000007BFEB000 008BA4 (v02 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: FACS 0x000000007BFAB000 000040 [ 0.000000] ACPI: UEFI 0x000000007BFFD000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: TCPA 0x000000007BFFC000 000032 (v02 INSYDE INSYDE 00000000 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x000000007BFFA000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000) [ 0.000000] ACPI: APIC 0x000000007BFF8000 000084 (v03 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x000000007BFF7000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: SLIC 0x000000007BFF6000 000176 (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: WDAT 0x000000007BFF5000 0001C4 (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: WDRT 0x000000007BFF4000 000047 (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007BFEA000 0007A1 (v01 INSYDE CpuPm 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007BFE9000 0002B5 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007BFE8000 0001DE (v01 INSYDE ApTst 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007BFE7000 000469 (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000) [ 0.000000] ACPI: TPM2 0x000000007BFE6000 000034 (v03 INSYDE INSYDE 00000000 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x000000007BFE5000 000044 (v01 INSYDE INSYDE 00000002 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x27ffd9000-0x27fffafff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007a4befff] [ 0.000000] node 0: [mem 0x000000007bfff000-0x000000007bffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.000000] On node 0 totalpages: 2073693 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7763 pages used for memmap [ 0.000000] DMA32 zone: 496832 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000007cc00000-0x000000007ebfffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a4bf000-0x7aebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x7aebf000-0x7bfbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x7bfbf000-0x7bffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7c3fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7c400000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 171 pages/cpu @ffff93ffb7200000 s659864 r8192 d32360 u1048576 [ 0.000000] pcpu-alloc: s659864 r8192 d32360 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [0] 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2041269 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.90-xenomai root=UUID=ca0244c5-d957-4ab6-8632-01fd821fcc06 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7741208K/8294772K available (8560K kernel code, 1458K rwdata, 3504K rodata, 2328K init, 8152K bss, 553564K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:1024 16 [ 0.000000] Interrupt pipeline (release #6) [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Detected 1600.000 MHz processor [ 0.000046] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=1600000) [ 0.000053] pid_max: default: 32768 minimum: 301 [ 0.000084] ACPI: Core revision 20160831 [ 0.016946] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.017040] Security Framework initialized [ 0.017044] Yama: becoming mindful. [ 0.017052] SELinux: Disabled at boot. [ 0.017056] AppArmor: AppArmor disabled by boot time parameter [ 0.018321] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.022840] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.024863] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.024886] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.025532] CPU: Physical Processor ID: 0 [ 0.025535] CPU: Processor Core ID: 0 [ 0.025542] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.025543] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.025554] mce: CPU supports 6 MCE banks [ 0.025567] CPU0: Thermal monitoring enabled (TM1) [ 0.025576] process: using mwait in idle threads [ 0.025583] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.025585] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0 [ 0.025589] Spectre V2 : Mitigation: Full generic retpoline [ 0.026487] Freeing SMP alternatives memory: 32K [ 0.026872] smpboot: Max logical packages: 1 [ 0.028942] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.038979] TSC deadline timer enabled [ 0.038985] smpboot: CPU0: Intel(R) Pentium(R) CPU N3710 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4) [ 0.038996] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 0.039034] ... version: 3 [ 0.039036] ... bit width: 40 [ 0.039038] ... generic registers: 2 [ 0.039040] ... value mask: 000000ffffffffff [ 0.039042] ... max period: 0000007fffffffff [ 0.039044] ... fixed-purpose events: 3 [ 0.039046] ... event mask: 0000000700000003 [ 0.040927] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.041357] x86: Booting SMP configuration: [ 0.041361] .... node #0, CPUs: #1 #2 #3 [ 0.048959] x86: Booted up 1 node, 4 CPUs [ 0.048964] smpboot: Total of 4 processors activated (12800.00 BogoMIPS) [ 0.051299] devtmpfs: initialized [ 0.051489] x86/mm: Memory block size: 128MB [ 0.061416] evm: security.selinux [ 0.061418] evm: security.SMACK64 [ 0.061420] evm: security.SMACK64EXEC [ 0.061421] evm: security.SMACK64TRANSMUTE [ 0.061423] evm: security.SMACK64MMAP [ 0.061425] evm: security.ima [ 0.061426] evm: security.capability [ 0.061593] PM: Registering ACPI NVS region [mem 0x7aebf000-0x7bfbefff] (17825792 bytes) [ 0.062505] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.062529] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.062661] pinctrl core: initialized pinctrl subsystem [ 0.062967] RTC time: 6:19:44, date: 04/23/18 [ 0.063196] NET: Registered protocol family 16 [ 0.063894] PCCT header not found. [ 0.063997] ACPI: bus type PCI registered [ 0.064001] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.064189] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.064194] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.064209] PCI: Using configuration type 1 for base access [ 0.072338] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.073030] ACPI: Added _OSI(Module Device) [ 0.073033] ACPI: Added _OSI(Processor Device) [ 0.073036] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.073038] ACPI: Added _OSI(Processor Aggregator Device) [ 0.073432] ACPI: Executed 5 blocks of module-level executable AML code [ 0.092668] ACPI: Dynamic OEM Table Load: [ 0.092688] ACPI: SSDT 0xFFFF93FFB597B800 0006FD (v01 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.093012] ACPI: Executed 1 blocks of module-level executable AML code [ 0.093359] ACPI: Dynamic OEM Table Load: [ 0.093375] ACPI: SSDT 0xFFFF93FFB59BF800 0003CA (v01 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.093851] ACPI: Executed 1 blocks of module-level executable AML code [ 0.094728] ACPI: Dynamic OEM Table Load: [ 0.094744] ACPI: SSDT 0xFFFF93FFB59FDE00 0001E0 (v01 PmRef ApIst 00003000 INTL 20160527) [ 0.095061] ACPI: Executed 1 blocks of module-level executable AML code [ 0.095347] ACPI: Dynamic OEM Table Load: [ 0.095361] ACPI: SSDT 0xFFFF93FFB59ECE00 0000C9 (v01 PmRef ApCst 00003000 INTL 20160527) [ 0.095570] ACPI: Executed 1 blocks of module-level executable AML code [ 0.098797] ACPI: Interpreter enabled [ 0.098866] ACPI: (supports S0 S3 S4 S5) [ 0.098869] ACPI: Using IOAPIC for interrupt routing [ 0.098973] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.099086] platform wdat_wdt: failed to claim resource 4 [ 0.099101] ACPI: watchdog: Failed to create platform device [ 0.101997] ACPI: Power Resource [USBC] (on) [ 0.114858] ACPI: Power Resource [ID3C] (off) [ 0.124663] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.124676] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.124846] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.124878] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.125241] acpi PNP0A08:00: host bridge window expanded to [mem 0x80000000-0xdfffffff window]; [mem 0x80000000-0xdfffffff window] ignored [ 0.125905] PCI host bridge to bus 0000:00 [ 0.125911] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.125915] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.125918] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.125922] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.125926] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.125930] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.125933] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.125937] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.125941] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.125958] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 [ 0.126371] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000 [ 0.126411] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 0.126435] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.126452] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.126834] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601 [ 0.126916] pci 0000:00:13.0: reg 0x20: [io 0x2060-0x207f] [ 0.126933] pci 0000:00:13.0: reg 0x24: [mem 0x9141e000-0x9141e7ff] [ 0.127019] pci 0000:00:13.0: PME# supported from D3hot [ 0.127310] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 [ 0.127347] pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit] [ 0.127480] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.127696] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.127827] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 [ 0.127856] pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff] [ 0.127873] pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff] [ 0.128003] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.128393] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300 [ 0.128431] pci 0000:00:1b.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit] [ 0.128562] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.128746] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.128865] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400 [ 0.129007] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.129196] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.129318] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400 [ 0.129462] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.129638] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.129772] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 [ 0.130194] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500 [ 0.130253] pci 0000:00:1f.3: reg 0x10: [mem 0x91418000-0x9141801f] [ 0.130380] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f] [ 0.130929] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.131120] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.131152] pci 0000:02:00.0: reg 0x10: [io 0x1000-0x10ff] [ 0.131198] pci 0000:02:00.0: reg 0x18: [mem 0x91100000-0x91100fff 64bit] [ 0.131226] pci 0000:02:00.0: reg 0x20: [mem 0x91000000-0x91003fff 64bit pref] [ 0.131384] pci 0000:02:00.0: supports D1 D2 [ 0.131388] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131493] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.135119] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.135127] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 0.135134] pci 0000:00:1c.2: bridge window [mem 0x91100000-0x911fffff] [ 0.135145] pci 0000:00:1c.2: bridge window [mem 0x91000000-0x910fffff 64bit pref] [ 1.198132] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 1.198345] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.198558] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.198768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.198977] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.199198] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.199408] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 1.199618] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.211378] ACPI: Enabled 6 GPEs in block 00 to 3F [ 1.211669] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 1.211673] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.211680] vgaarb: loaded [ 1.211683] vgaarb: bridge control possible 0000:00:02.0 [ 1.212268] SCSI subsystem initialized [ 1.212406] libata version 3.00 loaded. [ 1.212463] ACPI: bus type USB registered [ 1.212520] usbcore: registered new interface driver usbfs [ 1.212552] usbcore: registered new interface driver hub [ 1.212601] usbcore: registered new device driver usb [ 1.212995] PCI: Using ACPI for IRQ routing [ 1.215881] PCI: pci_cache_line_size set to 64 bytes [ 1.215958] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 1.215963] e820: reserve RAM buffer [mem 0x7a4bf000-0x7bffffff] [ 1.216262] NetLabel: Initializing [ 1.216265] NetLabel: domain hash size = 128 [ 1.216267] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.216294] NetLabel: unlabeled traffic allowed by default [ 1.216510] clocksource: Switched to clocksource refined-jiffies [ 1.239625] VFS: Disk quotas dquot_6.6.0 [ 1.239675] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.239929] pnp: PnP ACPI init [ 1.240177] system 00:00: [io 0x0680-0x069f] has been reserved [ 1.240182] system 00:00: [io 0x0400-0x047f] has been reserved [ 1.240187] system 00:00: [io 0x0500-0x05fe] has been reserved [ 1.240197] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.243759] system 00:01: [mem 0x91421000-0x91421fff] has been reserved [ 1.243764] system 00:01: [mem 0x9141f000-0x9141ffff] has been reserved [ 1.243769] system 00:01: [mem 0x9141d000-0x9141dfff] has been reserved [ 1.243773] system 00:01: [mem 0x9141b000-0x9141bfff] has been reserved [ 1.243778] system 00:01: [mem 0x91419000-0x91419fff] has been reserved [ 1.243787] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.244070] system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved [ 1.244075] system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved [ 1.244080] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved [ 1.244084] system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved [ 1.244088] system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved [ 1.244092] system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved [ 1.244097] system 00:02: [mem 0xfed80000-0xfedbffff] could not be reserved [ 1.244101] system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 1.244106] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.244114] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.244557] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.245059] pnp: PnP ACPI: found 4 devices [ 1.255463] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.255495] clocksource: Switched to clocksource acpi_pm [ 1.255527] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 1.255534] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 1.255540] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 1.255563] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 1.255567] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 1.255572] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1.255577] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1.255581] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 1.255586] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 1.255600] pci 0000:00:1c.0: BAR 14: assigned [mem 0x91500000-0x916fffff] [ 1.255612] pci 0000:00:1c.0: BAR 15: assigned [mem 0x91700000-0x918fffff 64bit pref] [ 1.255620] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 1.255626] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.255632] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 1.255642] pci 0000:00:1c.0: bridge window [mem 0x91500000-0x916fffff] [ 1.255650] pci 0000:00:1c.0: bridge window [mem 0x91700000-0x918fffff 64bit pref] [ 1.255662] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 1.255667] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 1.255676] pci 0000:00:1c.2: bridge window [mem 0x91100000-0x911fffff] [ 1.255684] pci 0000:00:1c.2: bridge window [mem 0x91000000-0x910fffff 64bit pref] [ 1.255696] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 1.255701] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 1.255724] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 1.255728] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.255732] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.255735] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.255739] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 1.255743] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window] [ 1.255747] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 1.255751] pci_bus 0000:01: resource 1 [mem 0x91500000-0x916fffff] [ 1.255755] pci_bus 0000:01: resource 2 [mem 0x91700000-0x918fffff 64bit pref] [ 1.255759] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 1.255763] pci_bus 0000:02: resource 1 [mem 0x91100000-0x911fffff] [ 1.255767] pci_bus 0000:02: resource 2 [mem 0x91000000-0x910fffff 64bit pref] [ 1.256066] NET: Registered protocol family 2 [ 1.256531] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.256901] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.257295] TCP: Hash tables configured (established 65536 bind 65536) [ 1.257403] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.257542] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.257758] NET: Registered protocol family 1 [ 1.257798] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.259838] PCI: CLS 64 bytes, default 64 [ 1.259984] Unpacking initramfs... [ 12.915288] Freeing initrd memory: 327132K [ 12.915297] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 12.915304] software IO TLB [mem 0x764bf000-0x7a4bf000] (64MB) mapped at [ffff93fdb64bf000-ffff93fdba4befff] [ 12.915594] Scanning for low memory corruption every 60 seconds [ 12.916679] audit: initializing netlink subsys (disabled) [ 12.916729] audit: type=2000 audit(1524464396.904:1): initialized [ 12.917420] [Xenomai] scheduling class idle registered. [ 12.917422] [Xenomai] scheduling class rt registered. [ 12.917480] [Xenomai] SMI-enabled chipset found, but SMI workaround disabled (see xenomai.smi parameter). You might encounter high latencies! [ 12.918467] I-pipe: head domain Xenomai registered. [ 12.920801] [Xenomai] Cobalt v3.0.6 (Stellar Parallax) [ 12.920805] Initialise system trusted keyrings [ 12.921039] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 12.926710] zbud: loaded [ 12.928280] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 12.928809] fuse init (API version 7.26) [ 12.932995] Key type asymmetric registered [ 12.932998] Asymmetric key parser 'x509' registered [ 12.933141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 12.933237] io scheduler noop registered [ 12.933240] io scheduler deadline registered [ 12.933338] io scheduler cfq registered (default) [ 12.934073] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 12.934088] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 12.934212] efifb: probing for efifb [ 12.934218] efifb: framebuffer at 0xa0000, using 64k, total 64k [ 12.934221] efifb: mode is 640x480x1, linelength=80, pages=1 [ 12.934222] efifb: scrolling: redraw [ 12.934226] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 12.937678] Console: switching to colour frame buffer device 80x30 [ 12.940872] fb0: EFI VGA frame buffer device [ 12.941098] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:01/input/input0 [ 12.941104] ACPI: Power Button [PWR2] [ 12.941244] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 12.941250] ACPI: Sleep Button [SLPB] [ 12.941368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 12.941374] ACPI: Power Button [PWRF] [ 12.941496] GHES: HEST is not enabled! [ 12.941696] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 12.946589] Linux agpgart interface v0.103 [ 12.951755] loop: module loaded [ 12.952318] libphy: Fixed MDIO Bus: probed [ 12.952321] tun: Universal TUN/TAP device driver, 1.6 [ 12.952323] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 12.952427] PPP generic driver version 2.4.2 [ 12.952563] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.952572] ehci-pci: EHCI PCI platform driver [ 12.952604] ehci-platform: EHCI generic platform driver [ 12.952639] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 12.952645] ohci-pci: OHCI PCI platform driver [ 12.952668] ohci-platform: OHCI generic platform driver [ 12.952688] uhci_hcd: USB Universal Host Controller Interface driver [ 12.953162] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 12.953177] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 12.954354] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01509810 [ 12.954368] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 12.954619] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 12.954623] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.954627] usb usb1: Product: xHCI Host Controller [ 12.954630] usb usb1: Manufacturer: Linux 4.9.90-xenomai xhci-hcd [ 12.954633] usb usb1: SerialNumber: 0000:00:14.0 [ 12.954981] hub 1-0:1.0: USB hub found [ 12.955016] hub 1-0:1.0: 7 ports detected [ 12.956601] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 12.956614] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 12.956731] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 12.956735] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.956739] usb usb2: Product: xHCI Host Controller [ 12.956742] usb usb2: Manufacturer: Linux 4.9.90-xenomai xhci-hcd [ 12.956745] usb usb2: SerialNumber: 0000:00:14.0 [ 12.957068] hub 2-0:1.0: USB hub found [ 12.957097] hub 2-0:1.0: 6 ports detected [ 12.958783] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 13.930145] tsc: Refined TSC clocksource calibration: 1599.948 MHz [ 13.930162] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170ff3c37d3, max_idle_ns: 440795211487 ns [ 14.022145] i8042: No controller found [ 14.022413] mousedev: PS/2 mouse device common for all mice [ 14.022940] rtc_cmos 00:03: RTC can wake from S4 [ 14.023281] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 14.023331] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram [ 14.023348] i2c /dev entries driver [ 14.023535] device-mapper: uevent: version 1.0.3 [ 14.023761] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-de...@redhat.com [ 14.023862] ledtrig-cpu: registered to indicate activity on CPUs [ 14.024761] NET: Registered protocol family 17 [ 14.024794] Key type dns_resolver registered [ 14.025501] microcode: sig=0x406c4, pf=0x1, revision=0x40a [ 14.025643] microcode: Microcode Update Driver: v2.01 <tig...@aivazian.fsnet.co.uk>, Peter Oruba [ 14.026151] registered taskstats version 1 [ 14.026174] Loading compiled-in X.509 certificates [ 14.035654] Loaded X.509 cert 'Build time autogenerated kernel key: c49296fd12ce3f0ef222c034ec5e95a3df70daee' [ 14.035712] zswap: loaded using pool lzo/zbud [ 14.049683] Key type big_key registered [ 14.056572] Key type trusted registered [ 14.070181] Key type encrypted registered [ 14.070190] ima: No TPM chip found, activating TPM-bypass! [ 14.070271] evm: HMAC attrs: 0x1 [ 14.071285] Magic number: 14:620:317 [ 14.071368] tty tty42: hash matches [ 14.071447] reg-dummy reg-dummy: hash matches [ 14.071571] rtc_cmos 00:03: setting system clock to 2018-04-23 06:19:58 UTC (1524464398) [ 14.071720] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 14.071722] EDD information not available. [ 14.071961] PM: Hibernation image not present or could not be loaded. [ 14.078053] Freeing unused kernel memory: 2328K [ 14.078117] Write protecting the kernel read-only data: 14336k [ 14.079515] Freeing unused kernel memory: 1660K [ 14.083520] Freeing unused kernel memory: 592K [ 14.115312] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 14.153109] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 14.153429] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 14.153492] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 14.155238] random: udevadm: uninitialized urandom read (16 bytes read) [ 14.155320] random: udevadm: uninitialized urandom read (16 bytes read) [ 14.178119] usb 1-2: new low-speed USB device number 2 using xhci_hcd [ 14.191967] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 14.192091] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 14.192124] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 14.192889] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 14.192959] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 14.361336] sdhci: Secure Digital Host Controller Interface driver [ 14.361339] sdhci: Copyright(c) Pierre Ossman [ 14.372529] usb 1-2: New USB device found, idVendor=1a2c, idProduct=0c21 [ 14.372535] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.372538] usb 1-2: Product: USB Keyboard [ 14.372541] usb 1-2: Manufacturer: USB [ 14.390355] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA [ 14.399502] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 14.484761] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 14.484788] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 14.489404] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffa18c40d05000, 00:c0:08:92:44:62, XID 0c000800 IRQ 310 [ 14.489409] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 14.533108] usb 1-3: new low-speed USB device number 3 using xhci_hcd [ 14.662195] [drm] Initialized [ 14.706523] usb 1-3: New USB device found, idVendor=046d, idProduct=c05a [ 14.706529] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.706532] usb 1-3: Product: USB Optical Mouse [ 14.706536] usb 1-3: Manufacturer: Logitech [ 14.712467] mmc0: new HS200 MMC card at address 0001 [ 14.821163] hidraw: raw HID events driver (C) Jiri Kosina [ 14.853592] usbcore: registered new interface driver usbhid [ 14.853595] usbhid: USB HID core driver [ 14.857654] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 14.871624] input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1A2C:0C21.0001/input/input3 [ 14.923377] hid-generic 0003:1A2C:0C21.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:14.0-2/input0 [ 14.923922] input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:1A2C:0C21.0002/input/input4 [ 15.567083] clocksource: Switched to clocksource tsc [ 15.567654] hid-generic 0003:1A2C:0C21.0002: input,hidraw1: USB HID v1.10 Mouse [USB USB Keyboard] on usb-0000:00:14.0-2/input1 [ 15.568251] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C05A.0003/input/input5 [ 15.568550] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-3/input0 [ 15.574224] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA [ 15.574609] ahci 0000:00:13.0: version 3.0 [ 15.575226] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 15.575234] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst [ 15.576264] scsi host0: ahci [ 15.576622] scsi host1: ahci [ 15.576809] ata1: SATA max UDMA/133 abar m2048@0x9141e000 port 0x9141e100 irq 311 [ 15.576815] ata2: SATA max UDMA/133 abar m2048@0x9141e000 port 0x9141e180 irq 311 [ 15.581813] [drm] Memory usable by graphics device = 2048M [ 15.581819] checking generic (a0000 10000) vs hw (80000000 10000000) [ 15.581822] fb: switching to inteldrmfb from EFI VGA [ 15.581893] Console: switching to colour dummy device 80x25 [ 15.582107] [drm] Replacing VGA console driver [ 15.582375] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 15.582377] [drm] Driver supports precise vblank timestamp query. [ 15.595253] mmcblk0: mmc0:0001 DF4032 29.1 GiB [ 15.595532] mmcblk0boot0: mmc0:0001 DF4032 partition 1 4.00 MiB [ 15.595798] mmcblk0boot1: mmc0:0001 DF4032 partition 2 4.00 MiB [ 15.596175] mmcblk0rpmb: mmc0:0001 DF4032 partition 3 4.00 MiB [ 15.597963] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 15.616792] mmcblk0: p1 [ 15.630617] random: fast init done [ 15.716852] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 15.718657] acpi device:2b: registered as cooling_device0 [ 15.718877] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 15.719193] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 [ 15.822557] fbcon: inteldrmfb (fb0) is primary device [ 15.891359] ata1: SATA link down (SStatus 0 SControl 300) [ 15.891398] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 15.957074] Console: switching to colour frame buffer device 210x65 [ 15.983112] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 20.969889] ata2.00: qc timeout (cmd 0x47) [ 20.970918] ata2.00: READ LOG DMA EXT failed, trying unqueued [ 20.970923] ata2.00: failed to get Log Directory Emask 0x40 [ 20.970926] ata2.00: ATA-10: GOODRAM, V3.3, max UDMA/133 [ 20.970930] ata2.00: 468862128 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 20.970941] ata2.00: failed to set xfermode (err_mask=0x40) [ 21.283167] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 21.283496] ata2.00: NCQ Send/Recv Log not supported [ 21.283866] ata2.00: NCQ Send/Recv Log not supported [ 21.283875] ata2.00: configured for UDMA/133 [ 21.284332] scsi 1:0:0:0: Direct-Access ATA GOODRAM V3.3 PQ: 0 ANSI: 5 [ 21.310310] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 21.310395] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 21.310516] sd 1:0:0:0: [sda] Write Protect is off [ 21.310528] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.310596] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.311686] sda: sda1 [ 21.312563] sd 1:0:0:0: [sda] Attached SCSI disk [ 21.460968] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 22.078969] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 22.079457] systemd[1]: Detected architecture x86-64. [ 22.079993] systemd[1]: Set hostname to <yeti-UDOO-x86>. [ 22.264970] systemd[1]: Created slice System Slice. [ 22.265126] systemd[1]: Reached target User and Group Name Lookups. [ 22.265160] systemd[1]: Reached target Remote File Systems (Pre). [ 22.265202] systemd[1]: Reached target Encrypted Volumes. [ 22.265429] systemd[1]: Created slice User and Session Slice. [ 22.265559] systemd[1]: Listening on Syslog Socket. [ 22.265652] systemd[1]: Listening on fsck to fsckd communication Socket. [ 22.420503] lp: driver loaded but no devices found [ 22.439570] ppdev: user-space parallel port driver [ 22.648902] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro [ 22.728593] systemd-journald[265]: Received request to flush runtime journal from PID 1 [ 23.425581] 8086228A:00: ttyS4 at MMIO 0x9141c000 (irq = 39, base_baud = 2764800) is a 16550A [ 23.433308] 8086228A:01: ttyS5 at MMIO 0x9141a000 (irq = 40, base_baud = 2764800) is a 16550A [ 23.465013] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 23.571008] lpc_ich 0000:00:1f.0: No MFD cells added [ 23.655258] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.098428] r8169 0000:02:00.0 enp2s0: link down [ 24.100825] r8169 0000:02:00.0 enp2s0: link down [ 24.196362] SSE version of gcm_enc/dec engaged. [ 24.920491] intel_rapl: Found RAPL domain package [ 24.920498] intel_rapl: Found RAPL domain core [ 25.034743] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 25.143032] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 25.143039] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 25.143043] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 25.143046] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 25.143049] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 25.143053] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 25.326332] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 25.326800] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 25.327118] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 25.327423] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 25.327789] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 26.683024] r8169 0000:02:00.0 enp2s0: link up [ 27.157079] random: crng init done [ 54.701688] mm/pgtable-generic.c:21: bad pgd ffff93ffb26f8140(0276da6067000000) С уважением и надеждой на сотрудничество, Шевченко Т.Г. ----- Original Message ----- From: "Greg Gallagher" <g...@embeddedgreg.com> To: "Шевченко Тарас Григорьевич" <shevchenko.ta...@triolcorp.com.ua> Cc: "xenomai" <xenomai@xenomai.org> Sent: Воскресенье, 22 Апрель 2018 г 4:19:30 Subject: Re: Unknown symbol in module Can you show the output of uname -r and possibly show your boot messages. On Sat, Apr 21, 2018 at 7:51 AM, Шевченко Тарас Григорьевич <shevchenko.ta...@triolcorp.com.ua> wrote: > Hi, Greg > I try to compile modified RTnet driver , and include "rtnet_port.h" > I succesfully get module r8169_2015_1.ko file but if i try to load it in a > system by sudo insmod r8169_2015_1.ko > > I get following errors > > yeti@yeti-UDOO-x86:~/eth$ sudo insmod r8169_2015_1.ko > insmod: ERROR: could not insert module r8169_2015_1.ko: Unknown symbol in > module > > > logs dmesg > > [101391.334742] r8169_2015: Unknown symbol __rt_alloc_etherdev (err 0) > [101391.334791] r8169_2015: Unknown symbol rtnetdev_alloc_rtskb (err 0) > [101391.334858] r8169_2015: Unknown symbol kfree_rtskb (err 0) > [101391.334918] r8169_2015: Unknown symbol rtdev_free (err 0) > [101391.334982] r8169_2015: Unknown symbol rt_register_rtnetdev (err 0) > [101391.335028] r8169_2015: Unknown symbol STACK_manager (err 0) > [101391.335528] r8169_2015: Unknown symbol RTDEV_manager (err 0) > [101391.335566] r8169_2015: Unknown symbol rt_stack_connect (err 0) > [101391.335609] r8169_2015: Unknown symbol rt_stack_disconnect (err 0) > [101391.335651] r8169_2015: Unknown symbol rt_rtdev_connect (err 0) > [101391.335683] r8169_2015: Unknown symbol rtskb_pool_release (err 0) > [101391.335720] r8169_2015: Unknown symbol rtnetif_rx (err 0) > [101391.335766] r8169_2015: Unknown symbol rt_eth_type_trans (err 0) > [101391.335802] r8169_2015: Unknown symbol rt_unregister_rtnetdev (err 0) > [101391.335849] r8169_2015: Unknown symbol rtdev_alloc_name (err 0) > [101391.335882] r8169_2015: Unknown symbol rt_rtdev_disconnect (err 0) > > How i can fix this ? > > С уважением и надеждой на сотрудничество, > Шевченко Т.Г. > > ----- Исходное сообщение ----- > От: "Greg Gallagher" <g...@embeddedgreg.com> > Кому: "Шевченко Тарас Григорьевич" <shevchenko.ta...@triolcorp.com.ua> > Копия: "xenomai" <xenomai@xenomai.org> > Отправленные: Вторник, 17 Апрель 2018 г 19:40:47 > Тема: Re: [Xenomai] PCIe driver to communicate > > There no official documentation for doing this but if you google > 'Xenomai PCI driver', you should find some third party example on how > to do this. > > -Greg > > On Tue, Apr 17, 2018 at 9:56 AM, Шевченко Тарас Григорьевич > <shevchenko.ta...@triolcorp.com.ua> wrote: >> Hi! >> I have to write PCIe driver to interchange with FPGA >> Posiible someone do it before ? pls share with me or point me where to start >> ? >> Thanks >> >> >> _______________________________________________ >> Xenomai mailing list >> Xenomai@xenomai.org >> https://xenomai.org/mailman/listinfo/xenomai _______________________________________________ Xenomai mailing list Xenomai@xenomai.org https://xenomai.org/mailman/listinfo/xenomai
