Hi JackZhang On Sat, Jan 26, 2019 at 11:01 AM JackZhang <[email protected]> wrote: > > Thanks, Michael > I have kernel 4.1.18 + xenomai 3.0.6 works too, but can't work with ti's drm > drivers. > Ti's sdk[1] with own kernel based on 4.1.18, can not work with ipipe patch, > and i it's > hard to solve the conflict. > > Now, Ti's drm driver code is in the new kernel 4.14, so the best way is that > ipipe-arm > can work with the 4.14 kernel.
What is you requirement? Running opengl qt application + realtime? Michael > > [1]. > http://processors.wiki.ti.com/index.php?title=Processor_SDK_Linux_Release_Notes&oldid=214754 > > At 2019-01-26 17:36:34, "Michael Nazzareno Trimarchi" > <[email protected]> wrote: > > >Hi Jack > > > > > >On Sat, Jan 26, 2019 at 10:20 AM JackZhang via Xenomai > ><[email protected]> wrote: > >> > >> Hi, Grep, thanks. > >> > >> > >> > >> >Have you tried this with the 4.9 or 4.4 kernel and ipipe patch? I > >> >think 4.4 (which is based on a SLTS) has been tested on beaglebone > >> >(similar processor). Did you mean kernel 4.14 not 3.14? > >> > >> I mean kernel 4.14. Sorry for mistake. > >> >I think I've reproduced this on a Beaglebone which is based on a > >> >similar processor, I'll look into it this week. > >> Thank you very much! > > > >I have 4.1.6 + xenomai 3.0.7 and seems that it works > > > >Michael > > > >> > >> > >> 在 2019-01-22 23:18:03，"Greg Gallagher" <[email protected]> 写道： > >> >On Tue, Jan 22, 2019 at 5:34 AM 张建昆 via Xenomai <[email protected]> > >> >wrote: > >> >> > >> >> Hello everyone, here is some new clues: > >> >> 1. I tried xenomai 3.0.8, kernel 3.14.17 and > >> >> ipipe-core-4.14.71-arm-4.patch. Still the same question. > >> > > >> >Have you tried this with the 4.9 or 4.4 kernel and ipipe patch? I > >> >think 4.4 (which is based on a SLTS) has been tested on beaglebone > >> >(similar processor). Did you mean kernel 4.14 not 3.14? > >> > > >> >> 2. It seems the system is locked up once a gpio interrupt is triggered. > >> >> > >> >> 3. Some debug information show that, once a gpio interrupt is > >> >> triggered, the function > >> >> > >> >> 'omap_gpio_irq_handler' is triggered all the time. > >> >I think I've reproduced this on a Beaglebone which is based on a > >> >similar processor, I'll look into it this week. > >> > > >> >> There may be a little bug exists, but i don't know how to amend it. > >> >> Thank you very much, if anyone can help. > >> >> > >> > > >> >-Greg > >> >> >------------------------------ > >> >> > > >> >> >Message: 3 > >> >> >Date: Fri, 18 Jan 2019 11:48:12 +0800 (CST) > >> >> >From: 张建昆 <[email protected]> > >> >> >To: [email protected] > >> >> >Subject: Help: System freeze when edge interrupt trigger, > >> >> > Xenomain3.0.8, ipipe-arm main line, am335x > >> >> >Message-ID: <[email protected]> > >> >> >Content-Type: text/plain; charset="gbk" > >> >> > > >> >> >Hello! > >> >> > The system freeze when interrupt is triggered. I clone ipipe-arm > >> >> > master, and use xenomai 3.0.8 following xenomai startup tutorial. > >> >> >The hardware cpu is am3358. System works fine after start up, but the > >> >> >system immediately locks up when a edge interrupt. For example, > >> >> >the mmc card in pluged in. Is it something worng ? Thank you very much! > >> >> > > >> >> > The kernel config file and dts attached. > >> >> > > >> >> > > >> >> >-------------- next part -------------- > >> >> >A non-text attachment was scrubbed... > >> >> >Name: .config > >> >> >Type: application/octet-stream > >> >> >Size: 129591 bytes > >> >> >Desc: not available > >> >> >URL: > >> >> ><http://xenomai.org/pipermail/xenomai/attachments/20190118/538175f9/attachment.obj> > >> >> >-------------- next part -------------- > >> >> >A non-text attachment was scrubbed... > >> >> >Name: am335x-dnk-v1_LCD800x480_TM070RDH13.dts > >> >> >Type: application/octet-stream > >> >> >Size: 29436 bytes > >> >> >Desc: not available > >> >> >URL: > >> >> ><http://xenomai.org/pipermail/xenomai/attachments/20190118/538175f9/attachment-0001.obj> > >> >> > > >> >> >------------------------------ > >> >> > > >> >> >Subject: Digest Footer > >> >> > > >> >> > > >> >> > > >> >> > > >> >> >------------------------------ > >> >> > > >> >> >End of Xenomai Digest, Vol 81, Issue 17 > >> >> >*************************************** > > > > > > > >-- > >| Michael Nazzareno Trimarchi Amarula Solutions BV | > >| COO - Founder Cruquiuskade 47 | > >| +31(0)851119172 Amsterdam 1018 AM NL | > >| [`as] http://www.amarulasolutions.com | -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com |
